Starting the radius arms on my new solid axle swap build Tahoverlanding Axle swap white Tahoe

Подписаться 2,4 тыс.

Просмотров 1,4 тыс.

50% 1

Time to start on my radius arm links for my white tahoe solid axle build.
square tube? poly bushings?
Full GM solid axle swap parts list video:
• GM 6 lug solid axle sw...
a solid axle conversion on stock tire size
etc.
Now offering ultra HD track bar builders blanks
Better than cast or forged, they can be welded. And can be machined/ threaded for your swap.
tags:
Chevy tahoe suburban Silverado gmc Sierra
Chevrolet duramax solid axle swap Dana 44
Dana 60 diy fabrication custom fab dirt lifestyle
whistlin diesel ram trucks Yukon gear and axle 4x4 posilok lift kit trophy truck off road 4x4 4 wheel drive 4wd smittybilt procomp rough matts country teraflex custom offsets move bumpers Lincoln welders harbor freight
ford trucks powerstroke dodge cummins trails mountains camping overland overlanding recovery Toyota tacoma 4runner moab sand Hollow bronco ii explorer ranger do it yourself Mattsoffroadrecovery hypertherm mig welding tig bigtiregarage fabrats plasma laser SAS g2 gears rcv performance Eaton elocker Detroit locker ARB ZIP posi Tom woods drive shafts

Опубликовано:

27 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 20

@riverbedoverland Год назад

You’ve convinced me to make my own. Basically chop off factory frame mounts and start all over. Thanks for helping me build the confidence lol. I’ve built all my armor but suspension fab is something I don’t have much experience with. Getting pinion angle set with the top link seems to be the kicker for me. And going all custom do I go longer than stock? Remembering lr arms are similar to that of a bronco. Thanks for all your knowledge and help so far.

@tahoverlanding Год назад

So when it comes to length, I discuss how to determine length here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1opjYq7Ezl0.html And I'm glad i helped you build confidence. That is always my goal. This short video talks about that too: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zGmn8cKK5kw.html

@tahoverlanding Год назад

Also, here's the video on when I attached mine to the frame if it helps: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-Vvg1NAu1sE0.html

@randyhernandez1590 Год назад

This makes me want to sas my Silverado 👍

@tahoverlanding Год назад

We'll be right here to help you do it 👍 Here's a parts list video: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-CupxI5YYKE8.htmlsi=OaBuTwacZ696gk2k and This video shows a swapped silverado ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BHxa-afRemg.htmlsi=FkaOJs9VrYiDZY7p And this video shows a couple more: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-kHDIvM-JYZ0.htmlsi=O58OdAix4Zap6dUI

@ernestpaul2484 Год назад

How tall is your Tahoe as it sits right now? EDIT: the blue one. What diameter tires are you running? I have an 03' Z71 Tahoe that I am interested in dong what you have done. My truck currently is leveled out with a slight forward "OEM" rake for towing on 285/75r16 Cooper S/T Maxx's. I am now disabled but can still climb into a vehicle and drive. I also would have to have it built for me as I do not have the tools or place to construct something like this. Do you build trucks these for customers? If so, what would it cost (all materials/labor/etc) for it to be done? Thanks, Paul. I live in NC.

@tahoverlanding Год назад

Hello Ernest, The height is thoroughly depicted here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-75XaEhbBVQ0.html And here: (Center of gravitySee at 3 : 40) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xreLdMWw8K8.html The customer's suburban at 11 : 35 in this video is low enough he has stock tire size ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BHxa-afRemg.html Yes, I install. You can put in an installation inquiry at Tahoverlanding.com The blue one has 285/70R17 when it has the silver wheels, and 35x12.50R17 when it has the red wheels

@ernestpaul2484 Год назад

@@tahoverlanding Thank you so much for the incredibly quick response! I will check those links out and see what I can do to make this happen. Once again thank you, Paul.

@tahoverlanding Год назад

@@ernestpaul2484 I'll be here 👍

@jamesrobinson5801 Год назад

I didn't know Metal Supply Houses had open yards. All of ours keep all the metal inside MASSIVE warehouses with gantry cranes. Crazy to see any of it out in the weather not protected...😢

@tahoverlanding Год назад

That's just the remnants they keep outside, it's also not typical. That place is horrible. Easily bottom of my list

@thomasmullinsiii7759 Год назад

Another video full of useful information that newbs like me will definitely appreciate

@tahoverlanding Год назад

Always happy to teach

@thomasmullinsiii7759 Год назад

@@tahoverlanding well, your followers, including myself, appreciate it

@jeremyhowell9463 Год назад

What is the avg length of your lower link on the radius arm? And where would I find the cross member and coil buckets to purchase on your website?

@tahoverlanding Год назад

6-1/2 feet of tube should give you a few left over inches when building the radius arms. Like it says on the website, If you'd like to order please contact us through the website. This video explains how to determine your radius arm length ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1opjYq7Ezl0.html

@bikerboyz80817 Год назад

Please don't forget to discuss the technique for tucking the axle, why you need to tuck it a certain way, and what you're measuring for when you tuck it. All in your future videos of course, I would greatly appreciate that.

@tahoverlanding Год назад

Don't worry, I'll keep you in mind

@bikerboyz80817 Год назад

@Tahoverlanding Solid axle conversion I was also curious to know if maybe you could create a folder/Playlist for this entire build so that we can easily save that entire folder to reference videos specific to this build/process since you've made it clear you plan on being very thorough through this build with your videos?

@tahoverlanding Год назад

@@bikerboyz80817 there is a Playlist for this build