Тёмный
No video :(

Static and rider sag shock setup 

KTM South Africa
Подписаться 1,1 тыс.
Просмотров 17 тыс.
50% 1

Static and rider sag shock setup - a crucial part of getting comfortable on your bike!
Newest KTM recruit Charan Moore takes us through the steps to getting your setup right...
#ReadyToRace

Опубликовано:

 

23 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 5   
@tamirmashiach8487
@tamirmashiach8487 2 года назад
best guide outthere i been look at all of them no one showed with a tape thank you so much dude
@The.JZA.
@The.JZA. Год назад
Thanks for the informative video. I have a Duke 390 and the manual says 14mm static sag and 47mm riding sag. I found a point above the rear axle that is exactly 600mm from the axle. I adjusted the shock preload +3 (i.e. 8/10) because I am 100kg plus riding gear. I am now getting riding sag ~47mm which is great but running 8/10 preload is obviously going to reduce static sag below the 14mm in the KTM spec. Does static sag even matter? The bike isn't going to ride by itself. It needs me on it in which case the riding sag is applicable. Is that correct? Also does 8/10 sound about right for my weight or do you think I should go down a notch?
@craigsteinman9807
@craigsteinman9807 Год назад
What if your static sag needs adjustment? How does that work.? And if get this right you say you use the unsprung measure ment when it's on the stand and subtract the measurement of when the rider is sitting on the bike to calculate find rider sag? The static sag thing throws me off when measuring the rider sag
@bradleyjames5592
@bradleyjames5592 Год назад
Static sag is with the rider off the bike and is used to determine if the spring rate is right for you weight. So static will be the measurement with the bike on the stand and then with the bike under is own weight. If static is 20mm or less you need a stiffer spring. 40mm or more you need a softer spring.
@bradleyjames5592
@bradleyjames5592 Год назад
To get the rider sag measurement you measure with the rider on the bike and take the measurement with the bike on the stand (rear wheel off the groud) subtract these two measurements and that will give your rider sag.
Далее
4 Ways to Improve Your Suspension for FREE!
18:21
Просмотров 189 тыс.
How to Set and Optimise Sag for Your Dirt Bike
17:26
Просмотров 53 тыс.
#JasonStatham being iconic
00:38
Просмотров 342 тыс.
TECH TIP - Setting sag the Race Tech way
6:23
Просмотров 27 тыс.
Motorcycle Sag Theory and Explanation
12:07
Просмотров 16 тыс.
How to adjust your suspension 1/3
19:15
Просмотров 12 тыс.
How Do You Tune Dirt Bike Suspension
30:48
Просмотров 76 тыс.
Best KTM Fork Alignment: Step by Step!
16:17
Просмотров 87 тыс.
Jeff's Top 10 Suspension Mistakes
22:59
Просмотров 42 тыс.