No video :(

STOP Using This Davinci Resolve Tool Right NOW!

Подписаться 158 тыс.

Просмотров 159 тыс.

50% 1

If you are using the blade tool, you are actually wasting so much time! Doing this will be 4x FASTER!
This video is NOT sponsored. Some product links are affiliate links which means if you buy something we'll receive a small commission.
📒 Show Notes 📒
2️⃣ Keypad I Use (Razer Tartarus Pro)➡️ amzn.to/3wzck3I
3️⃣ Cheaper Alternative (Razer Tartarus V2)➡️ amzn.to/4bGp3Az
3️⃣ Animation Templates Used:
brmediapro.com...
4️⃣ Transitions used in this video:
brmediapro.com...
5️⃣ Titles used in this video:
brmediapro.com...
My mission is to help content creators speed up their video-editing process while making higher-quality videos so they can go full-time doing what they love and making an impact through the power of video.
Here are the ways to further your Davinci Resolve knowledge & resources:
⚡️Davinci Resolve Starter Kit - brmediapro.com...
⚡️Davinci Resolve Beginners Guide - billyrybka.ret...
Connect with Billy Rybka on Social Media:
brmediapro.com
/ billyrybka
Contact@brmediapro.com
QUESTION? - If you have any questions about Davinci Resolve or Video Editing please comment below and I will do my best to answer it and or make a video on it :)
Subscribe to Billy Rybka Here: / billyrybka
Music provided by Epidemic Sounds. Start your free trial here ➡️ brmediapro.com...
#BillyRybka #DavinciResolve #VideoEditing

Опубликовано:

7 сен 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 413

@BillyRybka Год назад

Hey fam! I hope you learned something new in this video & I hope it speeds you up overall! If you want to take your videos to the next level & be part of a community of like minded people🔥Save Your Spot in my Inner Circle ➡brmediapro.com/inner-circle/

@ATLJB86 Год назад

I never do all that to cut. If i need to cut one clip, I select it and hit control B then hit backspace to remove the unwanted area or delete if I want it to slide into position. If I want to cut all clips from top to bottom on that section then I will just hit control \ and that’s it. Everything else is unnecessary. Backspace and delete gives you the two methods you need, no need to right click and all of that.

@DaLoveDonkey69420 Год назад

That's what I do, CTRL B, then either Delete or Backspace pending on which is desired.

@SKIDSnSTUFF Год назад

Until this video I figured everyone did it this way

@brunoouellette2 Год назад

Same here, i think i learned that in fcp way back when

@M_Jaggard Год назад

Agreed, in my workflow the number of times I want to ripple cut is very very limited - it normally results in a jumpy video that is too obviously edited. I use Ctrl-\ to cut and then generally I want to put something else inbetween so I'm happy to leave a gap where the removed section was.

@edfromyoutube3917 Год назад

Yeah backspace for ripple and del for non ripple

@cinematic.visuals Год назад

That's basically the same way I do it, only I use Ctrl+B to cut the clip where the playhead is placed then Shift+[ or Shift+] to trim to the playhead. Same actions, just different keystrokes :)

@Chewyshoot Год назад

I discovered this a few months ago and it has amplified my workflow like 3 fold! Legendary. I'm sure many people will appreciate this one, Billy. Keep it up!

@BillyRybka Год назад

RIGHT! Stright up game changing man!

@xjet Год назад

Doesn't Control-B do the same thing already? (ie: create a cut at the playhead position)?

@BillyRybka Год назад

Yeah, however it's not close to the other controls, so you have to go all around the keyboard and it become super inefficient

@mithileshlokhande Год назад

@@BillyRybka its also one more button to press.. i was already using Q/W but not the razor instead i did cmd+B.. I'll change to razor rn

@ArtDigitalMediaTV Год назад

I’m confused. I thought this already existed. I’ve been using command + backslash which slices. Then shift + delete which ripple cuts. Didn’t program them, they were already there.

@werdwerdus2 5 месяцев назад

looks like it's the same, just different keyboard shortcuts

@hunerdpercent Год назад

Basically setting up a Premiere work flow. Coming from Premiere I couldn’t get used to delete deleting everything before. I think was doing it wrong, but this is how I would go through my footage in premiere. Reading the comments helped me better understand how Davinci does this better by default. CTRL+B and delete. I’ll have to give that a try

@PALBantha Год назад

Tbh I still prefer the blade simply for the reason that the line of the playhead is too thick for me sometimes. B, left click, left click, delete. Still more steps than you need, but the blade just makes it easier for me to make a precise cut. I really like your videos, keep it up!

@TroyDan89 Год назад

I've was using a free version of video pad for the last 5 years, but now that I've recently brought davinci Resolve i cant stop being amazed by what it can do and what a difference it creates, and thanks to your videos i no longer feel completely lost and overwhelmed. Great Work! thanks.

@mancavepc1730 Год назад

Thanks for the video. Honestly the fastest way for me is using the default ctl B and delete method. Specially because davinci will automatically highlight what's before the cut. That's an additional step automatically done for you. Once you factor it in you're flow and choose you're cut points in a systematic manner. It speeds up the cutting process significantly even when you have multiple tracks in your timeline.

@HalfdeadRider Год назад

Ctrl-B then Shift-[ done

@DarkStarCoreX Год назад

I do Ctrl+\ because it's right next to Ctrl so I don't need to use two hands to cut.

@CorrosiveCitrus 9 месяцев назад

@@DarkStarCoreXyou need 2 hands for ctrl+B? O.o

@DarkStarCoreX 9 месяцев назад

@@CorrosiveCitrus Not really, I can do it with 1 hand, but I find it easier to use Ctrl+/ anyway.

@cosmashono7665 Год назад

I would really like to see a video on the Razor Tartarus.

@halbrooktechnologies Год назад

I've been using a Tartarus V2 for about a year to help in some audio work I do, I'd love to see setups and ideas on how to use it in Resolve as well. I love the macro ability it gives.

@toth1982 Год назад

I did the same previously. I have mapped F1 to Razor and F2 to "start to playhed". But now I went back to blade. Why? It is more convenient. My biggest problem is that if something is selected, F2, or "start to playhead" does not work. So sometimes something is selected, sometimes it is not. You never know. The second problem is that blade tool is more visible. It has a smaller line and you will cut where your mouse is. You can do more precise work with it. If you want to do the same with the playhead, you have to adjust its position above your clips on the "ruler", not on your clips. That is usually far away, so it is harder to be precise. Also, with keyboard shortcuts you can use blade fast as well: B, cut, cut, A, select with click, del.

@lawfulmasses Год назад

I prefer setting an In and and Out point and then hitting Delete.

@NighthawkX02 4 месяца назад

I don't understand one thing though, what's the point of using the right click to display the menu and select "ripple cut" if you can simply press the "del Ins" key to delete the selected area? I always did it that way. Anyway, it didn't work for me, I was able to assign a key to the razor and it worked, but for some reason, when I did the same to the "start/end to playhead" actions it didn't work :(

@ztekhouse Год назад

Is there any way to split one clip into many clips and specify how long each clip will be? For example a 2 minute single clip, split into exactly 8*15 second clips?

@Gam3rC4m Год назад

Dude you made my effing year. I came over to Resolve from my paid app Movie Studio 14 Pro (needed to be able to render at 1440p) and I was used to using S for split ALL the time. I thought the only option was to switch to the razor icon. Now I can split and cut with S and X - absolute beauty! Many Thanks!

@PrepMedic Год назад

Hate using the playhead to edit. I just use the fast key for the blade tool, click what I want cut then delete the video and delete the dead space. It automatically ripples it and does what you need it to do.

@dolphman85 Год назад

I also have the Tartarus for resolve but I still want to to see how you use it. I bet you have tons more shortcuts in it than I do.

@BingGeaux 5 месяцев назад

@3:26 - you were saying about wasting time? as you waste some time - LOL

@realmarkstewart 7 дней назад

Thank you!! Moving from Premier Pro and was working out how the hell to do this in DaVinci until now!

@NebulousFrivolity Год назад

this is exactly what I've been looking for! It's so frustrating that I can't just right click and have a tool to select to "cut" a track or video into two pieces.

@nothingspeaks Год назад

i dont know if its new, i guess it must be but i never played with the shortcuts and "CTRL+B" works for cutting and "DEL" ripple deletes where "BACKSPACE" just gets rid of the clip without rippling

@Hobynist 6 месяцев назад

Thanks for the tip! Will be using that for sure. I´ve been doing it a little bit faster, with shortcut (B) for the blade and (A) for the selection, and then hit delete for the removal of the clip. But your style will save even more time 👍

@VexedSinik Год назад

The cut and select have their own keys already mapped. Backspace deletes the selection and delete ripple cuts. The shortcuts are already there. Why are we over complicating this?

@larsord9139 3 месяца назад

I do not like keyboard shortcuts. True, If you are a heavy user of Resolve (or any other complicated program) and seldom use other programs, shortcuts are areal time saver. But, in my case, I'm more of a casual user of several types of programs ( 2D cad, 3D cad, drawing, photo editing, data bases, spreadsheets, video editing etc.) there is no way I could remember more than a few shortcuts. Even then I find myself using a shortcut from 1 program in a wrong program. Perhaps I'm just dumb and in the minority in this regard. But I'm sure many will find this video of real value. Thank you for taking the time to post it.

@iliaskapatos Год назад

Thank you for this great video :-). I just can't make it work like in your case. When I set the keyboard like you did, it makes the "End to Playhead" to work only in the "cut" mode of DR 18.0.2 but not in the "edit", same with the "razor" it works only in the "cut" window. Now the "Start to playhead" is not working anywhere not in the "cut" and not in the "Edit" window. It would be great if you would have a advice for me.

@FilNenna Год назад

MOST USEFUL VIDEO EVER. I had “cut” mapped, but didn’t know about “start to playhead”.

@mariaeduardagoschmarafon3043 Год назад

I paused as you went along and did the steps myself and that helped a TON.

@sumantamunda843 Год назад

You can also do this using shortcut like ctrl+b and ctrl+shift+[ or ]

@ViciousTech Год назад

I 100% would like to see a video on the Tartarus I have the V2 collecting dust from when I used to play WoW heavily and if I could use it for editing that would be amazing.

@HarshB-v9o Месяц назад

this is amazing , quick quest : Do you also turn on the force debater to highest quality while exporting especially for RU-vid and Instagram ???

@e.esiyok 5 месяцев назад

My question is, suppose there are 3-second gaps between the clips you cut. How can you combine all the clips with a single click, going through the gaps between them?

@chuckmakesabuck129 Год назад

On my initial install, Razor is prepackaged as "b" Select is prepackaged as "a" The delete button on the keyboard deletes. Not that difficult... Don't mind me tho, I'm new at this.

@Martin1519 Месяц назад

I do it a little bit different but same idea. In the cut page, I simply mapped the cut action to C, so all I have to do is hit i o c, i o c, i o c, and that’s how I’ve been doing all my fine cuts very quickly.

@FloppySwordGaming 3 месяца назад

Select "B", make all your cuts with your mouse for the whole video on the timeline. When done, hit "A" to use select tool. Go through timeline and hold ctrl + left click and select all the clips you don't want, hit your delete key once. Done. This video is too much work.

@AudiovisualeFoto-Estudo-wd3vq 2 месяца назад

Actually this seems confusing, its easy for a robot know exactly what to select based on timing or if u r only cutting empty spacer but when u are cuting bullshit talking its hard without a marker. And the markers would take too long. Also davinci removes silences automatically so your tip is actually a downgrade of the video’s.

@SaveTheGoonDock Год назад

Noob switching from Premiere, frustrated with blade tool, "There must be a better way?!?" THANK YOU!

@FFVison Год назад

I thought there was something like this already, at least in 17. I think the keyboard shortcut for cutting was like the backslash \ or ctrl+B or something and then there were 2 other shortcuts that were like ctrl+shift+[ (left bracket) and ctrl+shift+] (right bracket). I'm a little hazy on if those are the exact shortcuts, but they should be something like that for what I was thinking.

@TheCleverMillionaire Месяц назад

This is an amazing video, saved me a ton of time

@jasonmurphy5139 Год назад

when im cutting i use "B" then click where i want to cut, "A", select clip (which has already been unlinked) and press backspace to delete in place or DEL to ripple delete. I am yet to try but i think im in the flow of what i use and i think this is not gonna save me much time at all :(

@Rood67 Год назад

I use a Razer mouse (the Hex, with seven button side panel) I have it set up to scrub both directions at increasing speed Pause Cut And ripple forward and backward I have the predecessor to the game pad you showed here, I have the Nostromo. I thought about setting it up; so I’d be interested in seeing what you did.

@ReadoneMohamed 5 месяцев назад

I am working already for a long while with ripple end/start - to - playhead as I have a bunch of gaming clips that I need to cut to a voice over real quick. And the clips are already ordered and just only need to be cut in a way to make it fit with what is said. This process in the old way would have taking me countless hours. Now it can be done in 1 or 2 hours max.

@robertwright8306 Год назад

I just switched to DaVinci from Premier the other day and this video popped up just in time! Thanks for the ideas!

@snowset675 11 месяцев назад

Thank god I learned this before I seriously hurt myself! I realize now that it is much safer to cut things with scissors than with a razor blade. Thanks for the video! Anyway, I should probably go bandage up my fingers now.

@photojoseph 6 месяцев назад

This is great. I used to use "trim start" and "trim end" on Q and W, but that required one more step -- entering Trim mode. This bypasses that; awesome!

@carlstunna1182 Год назад

Hi Billy can you make video that goes over how to make the effect where by jewelry shine and glistening very brightly in music videos?

@airecsy Год назад

ive always done it the C+B way but after 5 hours my hands deff starts to cramp up. gonna try it this way when I can get a cheap keypad

@TheMegazzZZZZZZZZZZZ Год назад

TNice tutorials is by far the best soft soft basic tutorial, I rember when I just started learning, tNice tutorials was so helpful!! I’ve now been releasing edm

@Soul_Visuals_Photography 6 месяцев назад

This is the video I’ve been waiting to find. This is how I have final cut set up.

@DSLRMAN01 Год назад

Please make a video on Razor Tartarus. I use it for color page, it is very handy and useful. And thank you for making these great videos... I greatly appreciate your work!!!👍

@UFODISCGOLF Год назад

HEY MAN HOW U DOING? , I HAD A QUESTION IS THERE A WAY TO ADD CUSTOM BUTTONS BUT TO THE BUTTONS FROM MY MOUSE HAS SIDE BUTTONS?, EXAMPLE: REPLACE (BLADE) "B" TO MY MOUSE SIDE BUTTONS?

@isitthatway 6 месяцев назад

3:22 It looks like they must have changed the behavior a bit, at least on a Mac. In DaVinci Resolve 18.6, you have to have the clip selected for the ripple to work, which makes sense.

@antoniogarcia4599 Год назад

Let's say I accidentally cut the wrong section can I undo it or need to star all over again

@chamoas23 Год назад

Ctr B if I need to cut the whole timeline (razor), you would not-use this if you ned to cut one track. SO basically you will need the "cut" tool still, so what you need to do press B (for cut) , then press A to go back to selection tool, click on top of the section you need and if is ripple delete what you need, and not just delete the section, what you want to do, just hit Command + delete, it is 3 steps and easy,

@d_image_planet Месяц назад

very good. Can we combine two commands in one key, kind of macro

@ryanreedgibson Год назад

Never even knew that existed. I always use the split clip tool from the cut page but use it on the edit page with CTR B.

@marvio_rocha 9 месяцев назад

Wow, Billy! I subscribe to your channel now. You are an awesome teacher to me and I understand your English perfectly too. Cheers from Brazil.

@twanhoward Год назад

Good Day, Ive reviewed many vids, including most of yours; and I may have missed this paicular effects tutorial; if there is one, but Im new to DR18 and Im trying to make a telephone "ONLY", vibrate as it rings in my clip. can you explain how to do that?

@MacieCvk Год назад

You're so awesome!

@BillyRybka Год назад

So are you!!!

@nestorisaacestoque5989 Год назад

I've been editing on a different editor for years and when I finally decided to move to Davinci Resolve, I was so confused where the cut button was. And almost literally all RU-vid tutorials keep telling me to use the blade tool like, who the heck uses the mouse to cut. It's not precise and it takes forever. Thank you for this video.

@Zerkam Год назад

Great tips!! I'll def check out more of your videos. Just started writing and making soft. I feel soft softs will help get to the next

@sorgulabiraz3161 Год назад

Thanks for the tip. You can also assign Q to Trim > Split Clip and W to Ripple > Start to playhead.

@BillyRybka Год назад

Beautiful! As long as you are cutting down on all unnecessary steps. It really doesnt matter how you do it, as long as you are not doing a ton of unnecessary actions ya know?

@f1zzso285 Год назад

Exactly Billy! I don't know, why some ppl uses that blade tool!

@GreenGreeny Год назад

Watching the start of this video, imagining some people actually cut that way is mind blowing. Been using Ctrl+B and Ctrl+shift+[ / ] so much its muscle memory and even my default hand rest position position.

@thepassionprojectnl Месяц назад

Omg thank you so much, this is exactly what I needed!

@GameWithTonyYT Год назад

What is the difference between "Delete selected" and "Ripple Delete" ?

@FenixDown147 7 месяцев назад

do you have a video that shows us some common shortcuts you recommend?

@officialveneno 4 месяца назад

how do make playhead continue at the start of the clip after ripple deleting during playback instead of playhead not stopping

@mellow0161 9 месяцев назад

hi! i just wanted to ask if this works on multiple tracks...im struggling with it just cutting the top track and not the bottom if that makes sense.

@selmanorhan8402 Год назад

Me newbie used more than 500 times razor to make amv, then see this video. Im like O.O . But with razor you can see video with hovering your cursor and thats so convenient for me to just dragging the line. Any tips for that?

@adrianstensrud Год назад

Can this be done without actually removing any audio?

@guich.mp4 Год назад

Hey Billy can you make a tutorial on how to make the bass displacement effect ( 3d tracked ) . I can't find any tutorial on how to make 3d tracked effects on davinci resolve ☹☹

@Martinkellydop Год назад

Great tips, thank you. Amen to the end caption too.

@aslanyureky 9 месяцев назад

you dont need to buy separate keypad, just buy keyboard with macro keys on it. I've been using that kind of keyboards since 10 years if not more, I always bind those tools to macro keys.

@janznowbowski9806 Год назад

why is there a gap in start to playhead? thank you very mcuh

@RayHorn5128088056 Год назад

Ctrl-B does it for me with del or backspace.

@BillyRybka Год назад

For sure, the main thing is that you dont want to be reaching all around the keyboard for the right shortcut, also delete/backspace means that you need to first make another cut, select it & then hit delete/backspace. If you map it to Q, then you dont need to make a cut nor reach to the delete/backspace button. Its a small tweak, but over time this seriously will save time.

@CappySmack Год назад

@@BillyRybka Point is well taken; however, I tend to scan my clips serially forward, and I tend to remove backward towards the head of the clip once I see the next useful part of a clip. What has your experience been with this sort of task? I enjoy your videos and am eager to learn all I can from those who have been using Davinci Resolve longer than I have.

@silvershoe 8 месяцев назад

This literally helped me. 😅 Thank you, Billy.

@edfromyoutube3917 Год назад

Bro, you are a genius. I was so annoyed the blade tool and you solved the problem. Thanks🙏

@TDHobbies Год назад

I'm new to resolve, so this really helps me out a LOT, Thanks I found that in multiple video and audio the timelines need to be linked if you want to cut them all together, but this does save a lot of time and is much easier.

@thomassorensen9749 10 месяцев назад

what if you dont want to trim audio as well? Im sinking drone video to audio

@AnthonyTilleyVideography 3 месяца назад

Hey everyone Da Vinci has taken note of these videos the shortcut for razor on windows is now ctrl+B with no further customization needed, start to playhead is Ctrl+Shift+[ , and end to playhead is Ctrl+Shift+] , and the shortcuts Actually WORK. (PS i have Da Vinci Resolve 18.6)

@ENMPlayzYT 5 месяцев назад

Thank you so much.This helped me out alot.I wasted alot of time when i was editing but this technique really helped me out.Keep up the great work

@wadespees7283 Год назад

hey thanks for all the info. i did exactly as you said . is there some thing i have to unlock to be able to do this thanks.

@garylawsonmedia305 Год назад

Hi Billy thanks for the video really want to set up the shortcut but the only problem is when I do my razor it only chops the video and does not do the audio am I missing something? Many Thanks

@BillyRybka Год назад

Thanks for the support man! So Deselect the video layer and use the razer tool on the clip. No layer should be highlighted when you cut

@The_Idea_of_Dream_Vision Год назад

This works in the cut page for me but when I go to edit page it doesn’t work

@___KS___ Год назад

Sony Vegas - S , cut basic button. Some settings in davinchi ... Is like stooped Adobe premiere.. cramp... 😎 Resolv.. suck here.

@yannieboi Год назад

You are the King! Thanks man!

@23trayn Месяц назад

this was a saviour video for someone coming from premiere pro ...thank you keep making more such

@ravKenclaw Год назад

I'm so glad I found this video after finishing up my first project! Hehe.

@sunroameroverland Год назад

so i did this and it only works in the cut page not the edit page ???

@lucatrusso 4 месяца назад

Thanks man, since I switched from Vegas cutting was a nightmare! Now I can cut as I always did also here, super useful

@TheEldorado1991 6 месяцев назад

Awesome video. I have a hotkey for this in Ableton live for my music and thought the default cut method in davinci to be slow and stupid. THANK YOU

@musanetesakupwanya1050 Год назад

So glad I found this channel

@CaptainTae Год назад

Isn’t it easier to set an in and out and delete?

@ScottSlykerman Год назад

A review on the Razer Tartarus would be awesome. Can you do a video on your editing gear as well? (keyboard, mouse, etc)

@KetoSimple Год назад

I use Control B to cut already... the rest I need to add to my workflow

@RonitBatra Год назад

I am currently shifting from premiere to davinci and premiere actually had the same commands for Q and W keys. I've been editing videos for a while now and on a daily basis so this is something that's been holding me back to shift because I cannot waste so much of my time trimming each and every clip. Thank you for making this video I was searching something exactly like this.

@nicholaspostlethwaite9554 Год назад

Well TY. At last I found out how to sort out the most basic thing in this software. Almost no one doing tutorials actually appear to member what it is like to be new at this ridiculous video editing stuff, with it's odd in house words and opaque controls. So I will use the nice way you started with! Proper clear and simple, with the blade.🙂

@nichobrooks Год назад

Hey brother, I need to pick your brain. I've watched all your resolve tutorials. there is one tutorial I would love for you to make. "how to remove lens flare" (annoying green dot). I successfully tracked the green dot in fusion but I couldn't make the patch remove tool to follow the tracking data, I tried for hours 😢