Тёмный

Stripped Bolt/Cross Threaded Bolt Hole SUPER HACK! Fix Almost Any Stripped Bolt Hole! 

The Clay Way
Подписаться 118 тыс.
Просмотров 109 тыс.
50% 1

I've got a SWEET stripped bolt / stripped bolt hole hack that's guaranteed to work on almost any stripped bolt hole. If you've got cross threaded bolts and can't seem to tighten your bolts, give this a try! You could always rethread the bolt hole, but you might not have the tools, so I figured I'd show you how! If you need to know how to fix a stripped bolt hole this will be the best method if you don't have a bolt hole tap and die kit. You won't always be able to retap a hole the same size, in most cases you'll be going the next size up. If you were thinking you could use Loctite on a stripped bolt. They do make a Loctite that does work for fixing stripped threads. But I only recommend that in a pinch!! If you needed to know how to fix stripped threads this will definitely save you some headache!
Sweet Tips and Money Saving Tricks!
7 Great Tips to Saving Gas in your Car!: • 7 Tips to Saving Gas i...
How to Remove a Stripped Off Lugnut: • How to Remove a Stripp...
Stripped Caliper Bolt Hole Repair!: • Stripped Caliper Bolt ...
How to Remove Stripped Off and Rusty Head Bolts!: • Video
Reach out to us!
Clay's AC and Auto Repair: / claysacandauto
The Clay way Patreon: / theclayway
The Clay Way Twitter: thenewclayway?lan...
FOR THE BIGGEST AND BEST PARTS CATALOG, CHECK OUT DORMAN PRODUCTS AT: www.dormanproducts.com/pages/...
⭐⭐⭐⭐If you liked the video and want to show your support, you can use any of these links to purchase ANY ITEM you normally would off of Amazon and we get a small commission with no extra cost to you! Make sure to complete orders through the links! Here's some tools to get started! Thank You!
60 PCS Tap and Die Set Metric and Standard Sizes: amzn.to/3MkcFtl\
Craftsman 20 Piece 1/4 Drive Metric Socket Set: amzn.to/3xEltpy
CRAFTSMAN Hand Saw, 12-Inch Hacksaw (CMHT20138): amzn.to/3uUijfE
OBD2 Scanner TOPDON AD600S Scan Tool, Code Reader: amzn.to/3Ot0gDR
DEWALT 20V Max Impact Driver Kit, 1/4-in: amzn.to/3y0vDRJ
5 Pieces Magnetic Telescoping Pick-up Tool Kit: amzn.to/3knxckI
Magnetic Screwdrivers Set with Case, Amartisan 42-piece: amzn.to/39sTSxT
CRAFTSMAN Mechanics Tools Kit with 3 Drawer Box, 216-Piece: amzn.to/3Nux6UL
ANCEL V6 PRO Bidirectional Scan Tool: amzn.to/3wRcvDy
CASOMAN Master Torx Bit Socket and External Torx Socket Set, 60-Piece Set: amzn.to/3NbWUpe
Thorstone No Spill Coolant Funnel Kit: amzn.to/3m1dADS
Join this channel to get access to perks:
/ @sharpcarco
The Clay Way nor makers,producers and installers will not responsible for ANY damage that happens to your Vehicle or if we are incorrect about any of my information contained in this or any of our videos ,any accidents that happen while you’re performing the procedures that We explain And you perform or anyone else perform. The Clay Way will not be liable in Way shape or Form. By viewing content you are agreeing to these terms.
This video is property of the Clay way Channell and root 66 productions. No portions of the video can be copied and re-distributed in any shape or form without written approval from root 66 and or the Clay way Channell!
Products that I use quite often.
PB blaster penetrating oil
Lisle tools
Snap-on tools
Matco Tool‘s
Dorman Products

Авто/Мото

Опубликовано:

 

25 авг 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 31   
@sharpcarco
@sharpcarco Год назад
⭐⭐⭐⭐If you liked the video and want to show your support, you can use any of these links to purchase ANY ITEM you normally would off of Amazon and we get a small commission with no extra cost to you! Make sure to complete orders through the links! Here's some tools to get started! Thank You! 60 PCS Tap and Die Set Metric and Standard Sizes: amzn.to/3MkcFtl\ Craftsman 20 Piece 1/4 Drive Metric Socket Set: amzn.to/3xEltpy CRAFTSMAN Hand Saw, 12-Inch Hacksaw (CMHT20138): amzn.to/3uUijfE OBD2 Scanner TOPDON AD600S Scan Tool, Code Reader: amzn.to/3Ot0gDR DEWALT 20V Max Impact Driver Kit, 1/4-in: amzn.to/3y0vDRJ 5 Pieces Magnetic Telescoping Pick-up Tool Kit: amzn.to/3knxckI Magnetic Screwdrivers Set with Case, Amartisan 42-piece: amzn.to/39sTSxT CRAFTSMAN Mechanics Tools Kit with 3 Drawer Box, 216-Piece: amzn.to/3Nux6UL ANCEL V6 PRO Bidirectional Scan Tool: amzn.to/3wRcvDy CASOMAN Master Torx Bit Socket and External Torx Socket Set, 60-Piece Set: amzn.to/3NbWUpe Thorstone No Spill Coolant Funnel Kit: amzn.to/3m1dADS
@DougHinVA
@DougHinVA 7 месяцев назад
Regular guys will not listen to... or follow... a nutty fellow. It's that simple.
@ldr4278
@ldr4278 7 месяцев назад
He is great !
@toronto070
@toronto070 Год назад
Quick question. I've seen videos like this where a slot is cut in the end of the bolt and I've seen videos where slots are cut into the thread on the sides of the bolt (to make a thread cutter / kind of a thread chaser). Any thoughts on the two methods and which is best for cross threaded holes? Thanks!
@njoeandjen
@njoeandjen 9 месяцев назад
1 STRIPPED BOLT GOING INTO POWER STEERING RACK FOR HOLD DOWN PLATE ON RETURN LINE AFTER I CHANGED THE ORING, BOLT IS ONLY ABOUT 1 INCH LONG SHOULD I USE A SELF TAPPING BIGGER BOLT THANKS FOR ANY HELP!
@GoBoGetRDoneGoBo
@GoBoGetRDoneGoBo Год назад
You the man brother!
@sharpcarco
@sharpcarco Год назад
Thanks, John
@jamierice5940
@jamierice5940 8 месяцев назад
Was it on purpose? I noticed the bolts quick but i would not have if i was doing it for myself. Good video.
@sharpcarco
@sharpcarco 8 месяцев назад
Yes …. I did it on purpose not the correct way to repair but the has been time where this was the easiest way to keep going
@ItodoVincentonah-xz9bz
@ItodoVincentonah-xz9bz 9 месяцев назад
Good job,how can one original tap and dies
@rupe53
@rupe53 Год назад
if it's a blind hole you can try a tap, then use a new bolt. If the threads still pull out then tap the next size, which may be metric or SAE to get just enough extra meat.
@Appalachian_Enduro
@Appalachian_Enduro Год назад
None of my supplied 10 mm bolts are going any of my to millimeter holes I get about three turns in on each screw and they all stop at the same limit what does this mean everything I have is brand new none of its used
@sharpcarco
@sharpcarco Год назад
Retap the holes that happens with inferior manufacturers
@anthoneyg2760
@anthoneyg2760 3 месяца назад
How can I contact you lmk?
@LookAtMe-C137
@LookAtMe-C137 Год назад
I couldn’t understand a word he said. Trying too hard to be animated, this video didn’t help me at all.
@ChristyKSweet
@ChristyKSweet Год назад
agree annoiyng beyond belief
@ballzzinyourmouth8
@ballzzinyourmouth8 Год назад
🤣
@ldr4278
@ldr4278 7 месяцев назад
No,no@@ChristyKSweet
@Cabin365
@Cabin365 Месяц назад
Must not speak English well if you can't understand him. Sounds like you guys are stuck on your project and unwilling to spend a couple mins to learn how to do it lol
@YourAverageFNAF_Edits
@YourAverageFNAF_Edits Год назад
The clay way is the way
@angelahighwolf
@angelahighwolf 9 месяцев назад
Dude, use a DREMEL metal cutting wheel instead of saw.
@joewynn2445
@joewynn2445 4 месяца назад
My ac compressor bolt that the ac clutch sits on is messed up, so cut a slit in it and the nut will go on?? I'm going to give this a try. Wish me luck. 😅😅😅
@sharpcarco
@sharpcarco 4 месяца назад
Well, hell you can’t break what’s already broken? Let us know.
@joewynn2445
@joewynn2445 4 месяца назад
@@sharpcarco you got that right, and ill keep you updated
@f5fstop
@f5fstop 7 месяцев назад
Too much idiocy to the video. The idea is great, the presentation is bad.
@lg3053
@lg3053 Месяц назад
You know there is maybe some really good information here but all the STUPID jokes aren't needed or wanted. It really takes away anything good from the video.
@sharpcarco
@sharpcarco Месяц назад
You sat through a two and 1/2 minute video ……. oh poor you !!!!! with jokes that you didn’t like ….. the hard life you must live. Thanks for the algorithm bump. I appreciate it.
@deeeelowww4191
@deeeelowww4191 11 месяцев назад
waste of time
@kristopherdetar4346
@kristopherdetar4346 Месяц назад
Dorkomondo dude please stop the clown routine.
@sharpcarco
@sharpcarco Месяц назад
Thank you very much I love Styx too.
Далее
I Built 3 SECRET Rooms In School!
33:34
Просмотров 16 млн
5 Ways to Fix Galled Threads
9:54
Просмотров 19 тыс.
How to Rethread a Hole Using a Tap and Die Set
7:08
Просмотров 453 тыс.
Loctite Stripped Thread Repair Tip  |  Fix My Hog
9:03
Просмотров 137 тыс.
HYDRAULIC PRESS VS STUDS, EXPENSIVE AND CHEAP
8:46
Просмотров 1,2 млн
Four Steps to Flawless Wire Joints (How to Solder)
11:45
How To Remove a Stuck Nut or Bolt
2:50
Просмотров 1,5 млн
How to Use a Tap and Die Set
9:03
Просмотров 440 тыс.
Лучшие АВТО за 300 тыс.
0:53
Просмотров 443 тыс.
1957 Ford Fairlane 500: The Spirit of the '50s
0:28
Просмотров 4,3 млн
Лучшие АВТО за 300 тыс.
0:53
Просмотров 443 тыс.
Лучшие АВТО за 300 тыс.
0:53
Просмотров 443 тыс.