Subwoofer Box for Beginners with Basic tools.

Подписаться 98 тыс.

Просмотров 21 тыс.

50% 1

You can build a subwoofer box with basic tools, even if you are a begginer. In this video I show you how!
Affiliate* links to tools used in the video:
Circular Saw: amzn.to/2Hg5C8T
Rip Cut: amzn.to/35h6zWr
Jig Saw: amzn.to/2IF7o3O
Drill: amzn.to/2H6Hzti
Drill Bits: amzn.to/2Hitskm
Speed Square: amzn.to/3kfxDM6
Utility Knife: amzn.to/35l6ame
Wire Cutters: amzn.to/2T6ihO8
Wire Strippers: amzn.to/37hG1XY
Crimpers: amzn.to/3m4c7us
If you found this video helpful then you can support the channel by dropping me a fiver on paypal: paypal.me/diyaudioguy
Connect with me on Facebook and Instagram:
/ diy-audio-guy-11142806...
/ diyaudioguy
*As an amazon associate I may earn a small commission on qualified purchases. As an affiliate marketer I may earn a small commission when you make a purchase at parts express.

Опубликовано:

14 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 57

@DIYAudioGuy 4 года назад

Get yourself a saw and start cutting! (affiliate link: amzn.to/2Hg5C8T) What are you waiting for?

@MichaelVanzuela-yv9sy 15 дней назад

You are Amazing..bos..I Love it all your Blog.thank you for your sharing ..god bless to your Family.. I'll see you again your blog

@elfuego4341 4 года назад

The quality of the content is top shelf. You can't let the lack of tools or fear of failure get in the way of DIY ambitions.

@DIYAudioGuy 4 года назад

The fastest way to develop problem solving skills is to have lots of problems that need solving.

@simplelife1741 3 года назад

I have a clamp jig, it helps a lot but this jig you’re using seem more useful. Imma have to get one!

@DIYAudioGuy 3 года назад

Those clamp on edge guides are great, you just have to make sure you offset for the distance between the guide and the blade. I always seem to screw that part up so I prefer the rip cut.

@Robertb00 2 года назад

Wow I remember the 2 screw circle jig back in the early 90’s on my first few enclosures. Yesterday I sat back and watched my CNC do all the work 😂

@DIYAudioGuy 2 года назад

CNC makes it a lot easier.

@lemyrmiguel7121 Месяц назад

What a good video!

@uncola6028 2 года назад

Great video, made it easy to understand and I love you only used basic tools that I actually have

@DIYAudioGuy 2 года назад

Thanks!

@ToniLixSim 2 года назад

about making subwoofer box without tools u know what loving subwoofer can do? i start making subwoofers box from 12 years old all i need, it was a screwdriver and hammer to make all cuts, in line and round for the speaker.. everything about cut was screwdriver and hammer, i was 12 old who care about time, just love it to make it done. corners i make it around with sandpaper, that takes time and get tired on hands but i make it without big tools :D if u see with eyes no one can believe that was cut with screwdriver and hammer 🤣👌👌👌 today i work with big CNC Wood.

@DIYAudioGuy 2 года назад

That is dedication!

@Live_Loud 2 года назад

Your each and every video adds more enthusiasm and knowledge to my head to enjoy car audio passion more and more!

@DIYAudioGuy 2 года назад

I appreciate that!

@MichaelVanzuela-yv9sy 15 дней назад

Good Day bos..I have question to you I am first timer to make Sub Box I have D12 size sub speaker I really confused to cut circle.. thanks for your answer... I'll see you your next amazing adventure.. I'm from Philippines..

@fixitrod4969 4 месяца назад

For those that didn't know, you can get a left-handed power saw. The blade is on the left and much easier to see for us Right-handed people. I've had a left-handed Porter Cable for 30 years. I'll never go back.

@Blue_3is 3 года назад

DUNDER MIFFLIN!! 🔥❤️ nice!

@DIYAudioGuy 3 года назад

That's what she said.

@Blue_3is 3 года назад

@@DIYAudioGuy 😂😂 “ I love inside jokes”

@Alexander.Punguino_939 2 года назад

One of a kind example of how to do it. Very helpful 👍 By the way, thanks God for the Gorilla 🦍Glue in spray 🙏 it's a must have item.

@DIYAudioGuy 2 года назад

Yes, it makes life easier.

@ajmann07 4 года назад

Good Job young Mann 👏

@DIYAudioGuy 4 года назад

No one has called me young in a long time!

@billy3650 3 года назад

How do you find out what kind of radiator you need, aren't there different weight radiators ? I want to build a box with 2 8 inch subs with 2 8 inch passive radiators. Good video and thanks for making.

@DIYAudioGuy 3 года назад

The PR(s) need to be able to move twice the air as the active driver(s). So if you have a single 8 with 8mm of X-max you will need two 8" passives, each with 8mm of X-max. Or a single 8 with 16mm. For this build I used a 10"sub and a 23" passive. You add weight to the PR to adjust the tuning.

@billy3650 3 года назад

@@DIYAudioGuy Makes sense thank you

@markroberts715 2 года назад

Thanks for the video bud, you think any chance in the future you can do a video explaining what over and under hung means on a subwoofer? I could Google it but I like watching your videos and you explain things very very well

@DIYAudioGuy 2 года назад

I might have to do that!

@JoshM7 4 года назад

I'm buying some plywood tomorrow. They're going to cut it for me for a fair price. Eventually I'll get the tools, right now I don't need them. Just need to ask a friend if I can use his Jigsaw and brad nailer. After putting together one of my boxes that way I can't go back to screws haha.

@DIYAudioGuy 4 года назад

Brad nails are definitely the way to go.

@DIYAudioGuy 4 года назад

I have very good luck with both my local Lowes and Home Depot. They guys that run the panel saw are very accurate, they guy at Lowes is a fellow audio enthusiast. They will make up to 4 cuts on MDF/plywood free of charge. I usually ask them to make the "major cuts," like in this build where trimmed a few inches off the long side, and a few rough cuts so the pieces are more manageable. Then I take everything to the table saw. This video was done just to show that you don' t need a table saw and a router.

@JoshM7 4 года назад

DIY Audio Guy I decided to try my luck with my Home Depot. Couldn't have asked for a worse person. Got cuts all wrong. Not even workable with over half an inch in the completely wrong dimension. (35x16.5 turned into 35.6x16 or something) He wouldn't take paper cut list. (Two 35x16.5 and two 35x12.5 for example would have been the main focus on the list) Had to return and they almost didn't let me. Unfortunately looks like I'm never trying anything like that again.

@DIYAudioGuy 4 года назад

@@JoshM7 Man I hate to hear that, that's terrible.

@JoshM7 4 года назад

DIY Audio Guy I forgot to bring my tape measure in. So I just had to trust he got it correct. Note to self. Don't forget tape measure. 😆

@kai_s.5177 4 года назад

Awesome video.. 👍👍

@DIYAudioGuy 4 года назад

I'm glad you liked it. Are you going to build something cool?

@kai_s.5177 4 года назад

@@DIYAudioGuy I’m thinking about it 🤔

@anujkerketta2947 4 года назад

Good job

@DIYAudioGuy 4 года назад

Thanks

@mattwilsey7520 3 года назад

I need help deciding on an enclosure. I have 2 soundstream t5 12” dual 4 ohm subs. I’ll be running them on a soundstream txp1.6000d amp at 1 ohm. Manufacturer recommends a minimum of 1.5 ft3 sealed or 1.75 ft3 ported per sub. I am limited on the enclosure size so I can only go 1.25 ft3 per sub. Will running a small box damage my subs or just hurt performance? Also would the sealed enclosure be a better option than ported due to the smaller size? Thanks.

@DIYAudioGuy 3 года назад

An undersized box is unlikely to damage anything, but it will hurt performance. if it were me I would have gone with a pair of 10s or just a single 12.

@mattwilsey7520 3 года назад

@@DIYAudioGuy ok. Thanks man

@kennethduncan9117 2 года назад

Need a box plan for two 15s that will hit hard

@DIYAudioGuy 2 года назад

diysubwoofer.blogspot.com/2021/05/custom-subwoofer-enclosure-designs.html

@johnviera3884 2 года назад

Cordless tools don’t last more than 6-8 years. Drills are fine because of the portability and performance. But I’ve had the same corded circular saw and corded jigsaw for 15 years.

@DIYAudioGuy 2 года назад

I like them for the extra convenience, Even if they do wear out. I find that once I've had a tool for 6 to 8 years I start itching to upgrade it anyway.

@johnviera3884 2 года назад

@@DIYAudioGuy plus those cordless tools are getting better and better.

@djkeys415s 3 года назад

Got older skill saw made a mistake and CUT THE CORD OFF and I never used it again be I bout the new cobalt cordless circ saw.my older saw mad that choice for me

@DIYAudioGuy 3 года назад

D'OH!

@gregkirby 3 года назад

What subwoofer is that?

@DIYAudioGuy 3 года назад

bit.ly/3dcZAjm

@irishmanbd8447 3 года назад

Or you can have home depot or Menards cut it for you... Just give them the measurements and they can cut it for you.

@DIYAudioGuy 3 года назад

The guys at my local Lowes and Home Depot are surprisingly accurate when they make the cuts.

@abdomination 2 года назад

I remember why I gave the thumbs down to this video now it's a pretty good video but I think it's unnecessary and bad advice to say that everybody needs to go to cordless tools.

@DIYAudioGuy 2 года назад

It's all good, there's no law saying that everybody has to agree with me. My opinion on the matter has changed a little bit since I've made this video. Cordless tools keep getting cheaper and better, I would recommend skipping right over the corded ones and jumping right into a cordless set.