Super Simple Install of a Gobi 4runner Ladder

Подписаться 31 тыс.

Просмотров 110 тыс.

50% 1

Trail4r.com Instructions: www.trail4runner.com/2017/12/...
Installation of the Gobi 4runner Ladder was supper easy and maybe only took trail4r and I 10-20 minutes. A few basic steps for set up then it was removing the 3m adhesive tape and sticking it to the 5th gen Toyota 4runner. After it was secure we bolted it up and the installation was complete.
DON'T FORGET to clean the sections of the body where you plan on placing the Gobi 4runner ladder.
Gobi Ladder: www.gobiracks.com/product/gobi...
Don't forget to subscribe!
-- keep crawling --
*******************************
FOLLOW US ON SOCIAL MEDIA
Website - snailtrail4x4.com
Facebook - / snailtrail4x4
Instagram - / snailtrail4x4
Twitter - / snailtrail4x4
Google+ - plus.google.com/u/1/105004491...
*******************************
LIST OF MY CAMERA GEAR
DJI OSMO - amzn.to/2vMqTPP
Rode VideoMicro (compact) - amzn.to/2fxEy6S
DJI Mic Mount - amzn.to/2vMxTMJ
GoPro Hero 3+ Silver - amzn.to/2vWmJFu
GoPro Aluminum Housing w/ mic mount - amzn.to/2uNYep3
GoPro Mic Cable - amzn.to/2vudOrU (cheap by 2, they will break)
Rode VideoMicro Go - amzn.to/2hRkoW9 (No Batteries Version)
Bendy TriPod - amzn.to/2vMs9m0 (DSLR Version)
Bendy TriPod Head - amzn.to/2uNxMfb
DISCLAIMER:
Some of these links are affiliate links at no additional cost to you. I will end up receiving a small commission if you end up purchasing some of these tools or products in the links. In some cases, you will actually receive a discount. I believe in being transparent with my community, and hopefully, with providing you with tools of the trade, you will, in turn, have no problem helping me out.

Авто/Мото

Опубликовано:

4 янв 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 156

@HTTR_FOREVER21 3 года назад

These videos are great, always my go to for my 4runner needs, I appreciate the work you're doing 👍

@SnailTrail4x4 3 года назад

Thanks for letting me know, I'm happy to help

@jeremiahis 3 года назад

That was so vastly simpler and clearer than the instructions they made with Windows '95.

@SnailTrail4x4 3 года назад

Haha, happy to help

@ClassyTacos 3 года назад

I just found your channel, awesome. I love it.

@SnailTrail4x4 3 года назад

Thanks!

@mattstangel2315 Год назад

Great video. I think I found my ladder. Easy install

@Matt014X 6 лет назад

Thanks for the walk through!

@SnailTrail4x4 6 лет назад

Glad to help, thank you for commenting and your support

@AZWESTSIDEWHEELERS 6 лет назад

Great video looks like an easy install.

@SnailTrail4x4 6 лет назад

+AZ WESTSIDE WHEELERS -- it was a super easy install. Almost in feel worth making the video when I saw the length of it.

@woadscout9955 3 года назад

Hey, love your instructional videos! It's proving difficult to find install videos for running power to the roof rack of a 4Runner through the back hatch. Would you ever consider doing an instructional vid on running power through the back of the 4Runner and up into the rack for all rack lights? I think it would be pretty awesome with also using the Switch Pros or the sPOD. Keep up with the sweet vids!

@SnailTrail4x4 3 года назад

That is a great suggestion. I will work on that!

@woadscout9955 3 года назад

@@SnailTrail4x4 Sweet! I would rather not run my power along the windshield arm because of the tight weather strip and if I ever need to replace my windshield I don’t want the repair guy to mess up the wires.

@johndiaz7240 6 лет назад

Soo easy,thanks

@SnailTrail4x4 6 лет назад

+John Diaz -- it's super simple, are you thinking about getting one?

@booke301 5 лет назад

Are the ladders compatible with 4Runners without a wing/spoiler?

@joshbordo 2 года назад

Hey what roof rack do you have so I can look it up and get it

@tpmacleod 4 года назад

Thanks for the video. It was a big help for the install. Just wondering if you found that the ladder does not seem parallel with the roof rack.? The latter is level top to bottom bit from behind it seems not to be parallel with the Pioneer Rhino Rack. My thinking is that the hatch is on a bit of a slope.

@SnailTrail4x4 4 года назад

It's probably not parallel to the rack as they are two different manufacturers.

@stephenvp 2 года назад

does the ladder touch your rack when you open the rear hatch?

@juliuselgine3468 2 года назад

Is this compatible with cali raised roof rack?

@mixflip 3 года назад

I wonder if that would fit my sienna awd minivan?

@SnailTrail4x4 2 года назад

Only one way to find out

@mixflip 2 года назад

@@SnailTrail4x4 lol...true...how much is this ladder?

@bizzheng 6 лет назад

Can you do a video on how to install the rhino platform there?

@SnailTrail4x4 6 лет назад

+Bing Zheng -- Thanks for the suggestion. I've been talking to Trail4r about covering roof racks. I'll see if I can find one. Big thanks for the suggestion 👍

@jesussuarez9742 4 года назад

They have ladder for 4runner 4th Gen sir?

@golf369 Год назад

Looks easy as pie

@amrak-8401 5 лет назад

Can you please tell the brand of the flat roof rack on the factory rails? Thank you!🙏🏻

@SnailTrail4x4 5 лет назад

Rhino rack 🦏

@Shiblee2000 2 года назад

Is that a pioneer platform rack from Rhino??

@michioman1 6 лет назад

Nice ladder. Did you get that 3x10 toyota banner at the long beach grand prix?

@SnailTrail4x4 6 лет назад

+Grant Tanaka -- A good friend of mine gave it to me, I'm not sure where he got it from. I do enjoy it and it sure fills up my shop.

@mlnhtrang 5 лет назад

did you have any issues with the ladder touching the rack when the lift gate is fully opened?

@SnailTrail4x4 5 лет назад

No, It fit great. Almost like they were made for eachother

@DanOhPhotography 2 года назад

No one makes back or side ladder for 2017 Honda Pilot ... I wonder if this unit will fit

@SnailTrail4x4 2 года назад

Not sure, contact the manufacturer

@GertieMusic 3 года назад

Hey Hey just found you on RU-vid! I have a Toyota Rav4 2005 2nd Gen. And I want to put a ladder on it. Is that possible? Also I was thinking of putting some sort of cooler attachment on to the ladder or on to the back of the rav 4 . Any help is appreciated

@SnailTrail4x4 3 года назад

It's possible, but I'm not sure this is the solution... I'm not sure about the RAV4 platform

@GertieMusic 3 года назад

@@SnailTrail4x4 gotcha thanks!

@karthikkailash535 5 лет назад

How is yours holding up after all this time? Mine still works but it has displaced the trunk door rubber lining where the ladder bottom rubs on it

@SnailTrail4x4 5 лет назад

Everything is working well, we have even added additional brackets to the ladder

@junioradil14 6 лет назад

Would you mind giving the exact ladder description that you used? Since there’s plenty’s out there so I know and order the right one, thanks!.

@SnailTrail4x4 6 лет назад

+Jorge R -- Added a link in the description.

@junioradil14 6 лет назад

Thanks!

@BenMacKinney 4 года назад

Dude you gotta climb that thing!

@SnailTrail4x4 4 года назад

I have a few times.

@lucycare3901 4 года назад

I would like to kow if that laddler will fit the Toyota Sequoia? If not, wich one you recomend? Thank you....🙂

@SnailTrail4x4 4 года назад

If not it would be close... There is some wiggle room. I don't know of any, sorry. You should contact Stellarbuilt he would know, or be able to make you one, haha

@kingbetong8741 3 года назад

Did your hatch door got miss alignment? Mine does after a yr

@SnailTrail4x4 3 года назад

We haven't had an issue

@RCGJR_ 4 года назад

Let’s say a couple of years down the road and i wanted to remove the ladder, will it damage the vehicle’s paint in anyways?

@SnailTrail4x4 4 года назад

To be honest, not clue. But it's like putting a sticker on your rig, it's not really going to hurt it.

@jy_vision2804 3 года назад

So the top part of the ladder base is taped onto the body? I am heavy guy not sure if it is safe climbing up with just the 3M tape.

@SnailTrail4x4 2 года назад

3m tape holds 100+ lbs per square in

@TrailCoMedia 6 лет назад

Niceeeee!!!

@mr.autobot2507 2 года назад

Did you update your lift shock when you install the ladder?

@SnailTrail4x4 2 года назад

Nope, it is stock

@MHix63 2 года назад

Thanks for the video. How wide is the ladder/steps?

@SnailTrail4x4 2 года назад

Maybe a foot

@alex-fo9zt 3 года назад

whats the name of the roof rack you have in your 4runner. Does that fit a gx470 ? nice ladder ..

@SnailTrail4x4 3 года назад

It's designed for 4Runmers but the GX are very close, it might work. You should contact Gobi and ask the manufacturer

@MrRgarcia112 6 лет назад

Nice 4runner is that a 4runner pro or a sr5? I want to buy a sr5 and install that rack, black rims and black out the chrome emblems.

@SnailTrail4x4 6 лет назад

+MrRgarcia112 -- This 4Runner is a Trail Premium. You should check trail4runner.com there are many great tutorials on the exact upgrades you want to do.

@sunnydlight2375 5 лет назад

Lol. Everyone does mate.

@youknowit158 6 лет назад

How long did it take to get that ladder? I have been reading like 6 months to get them

@SnailTrail4x4 6 лет назад

It was only about a month, but I called them and they had some in stock. I think we got lucky.

@kennedyroe3026 2 года назад

do i need the full roof rack? i’ve got the ladder, but i only have cross bars on my 4runner?!?!?

@SnailTrail4x4 2 года назад

Need? I think it depends on what you want to place on your roof

@tpmacleod 5 лет назад

How does the weight of the ladder effect the hydraulic hinge of the hatch? I have seen that some people upgrade the hinge to hold the weight of the Gobi ladder.

@SnailTrail4x4 5 лет назад

We haven't had any issues.

@gordonbyron5145 Год назад

So it only holds with 3M ? I would've put some 3M adhesive promoter first

@unlockingpotential1120 3 года назад

What brand is the spare tire hitch mount? Great video!!

@SnailTrail4x4 3 года назад

Ridgid

@Rigonidas 3 года назад

Is that tape really strong enough to hold up a person securely over time?

@SnailTrail4x4 3 года назад

It's been working great for over 3 years. One square inch of this 3m double sided tape is supposed to home 300 lbs

@justinfchan 6 лет назад

How much weight can the hatch/roof support ?

@SnailTrail4x4 6 лет назад

+justinfchan -- I have no idea how much the hatch supports, but time read that the ladder holds up to 250 pounds. I bet the door can hold more.

@PaulBodyBuilder 4 года назад

I have a 2002 GMC Envoy but golby doesn't make a ladder for my SUV can I use another ladder for another SUV llke a Toyota 4Runner.

@SnailTrail4x4 4 года назад

It possible, the geometry for some of the angles might be slightly different and the overhang on the top section might be too long. But it would be worth a look and measure some things out to see if it would be close.

@670trex 5 лет назад

what happened to Samantha?

@efremcacpal6995 2 года назад

Just wondering when you going finish Samantha?

@SnailTrail4x4 2 года назад

Coming in January

@agonzalezdemendoza 5 лет назад

Did you need the need new gas struts to keep your trunk door up?

@SnailTrail4x4 5 лет назад

No, it's so light that there wasn't an issue.

@youngtheking 5 лет назад

What about adding fuel container?

@wsalas13 4 года назад

just came upon your vid...is that an OEM slideout tray in the back...or something you built out

@SnailTrail4x4 4 года назад

It's added, check out trail4r.com

@wsalas13 4 года назад

@@SnailTrail4x4 Good info...thank you sir...great vids!

@xratedcivicturbo 5 лет назад

So is this just for show or can you actually use it what's the Weight limit on the latter

@SnailTrail4x4 5 лет назад

This is totally usable and the ladder has a 250 lb weight limit.

@e.j.rodriguez4669 5 лет назад

@@SnailTrail4x4 Im having a hard time understanding how 3m double sided tape lasts on uses of 250lbs weight and time wear how it is holding up now 5 months later?

@rarerides 5 лет назад

Similar install for a 97 Runner?

@SnailTrail4x4 5 лет назад

Yeah mostly, but I'm not Shure how the fitment would be. If Gobi makes a kit for 3rd gens then it would be similar

@tommywarren 4 года назад

I just ordered a Rhino Rack Pioneer platform as well for my 5th gen 4runner. Do you happen to know the distance between the the platform and the hatch when it's opened? I had looked at the Baja Rack ladder, but they said they need 3" between the hatch and rack. Maybe Gobi's needs less? Thanks!

@SnailTrail4x4 4 года назад

I'm sorry I don't know the distance, that rack has been sold and we have a different one now

@tommywarren 4 года назад

@@SnailTrail4x4 No worries, thanks for the reply. If you don't mind me asking, why did you get rid of the Rhino Rack? Ordered mine just a few hours ago, and that now I"m questioning if I made the right choice.

@rudypimentel5128 3 года назад

@@tommywarren im thinking of getting a rhino rack too, how do you like yours so far?

@tommywarren 3 года назад

@@rudypimentel5128 I've only had it just shy of a month, but so far I'm happy with it. I got the 76x49 size and the full rail kit. I went from 17.8mpg to around 16.4. Wind noise isn't noticeable until I hit ~75mph on the Interstate, but even then it fades into the background noise pretty quick and I forget about it. I suspect if I take the rails off (which honestly aren't really needed in most cases) I'd see a little improvement in mpg and noise. My biggest concern with it, is I'd like to have a ladder on the back door instead of just standing on the tires and back bumper to access it but I haven't gotten any definitive info on what ladders might fit. The Bajarack folks said their ladder needs 3" between the back of the rack and the spoiler when the rear hatch is open, and with the Rhinorack, it's just slight less than 2". One other thing - the eyebolt kits Rhinorack sells are ridiculously priced. I ordered galvanized eyebolts, washers and nuts from McMaster-Carr and saved a bunch.

@rudypimentel5128 3 года назад

@@tommywarren Thanks for the detailed response. I'm torn between the rhinorack and gobi. So if you could do it over again would you go without the full rail kit? I too would like a ladder in the rear, would the gobi ladder fit with the rhinorack? I like your idea of going elsewhere for the eyebolts, is the mounting system pretty easy to use? Thanks again!

@thepebblesexplore83 3 года назад

Any reason you couldn’t put this in the middle of you have a roof top tent?

@SnailTrail4x4 3 года назад

I don't recall but I believe the section in the middle of the door has a bigger Gap to the third brake light light wing. It still might be possible to do adjust word require some testing

@rayc76knoxville 4 месяца назад

No drilling? If so, great!

@itsajoke631 4 года назад

How’s the wind noise?

@tenfiddydrums1348 4 года назад

OH good question, I would like to know also

@thymeandtenderness 5 лет назад

Can this be insalled on the right side or only the left?

@SnailTrail4x4 5 лет назад

Yes it can. I might advise you to put it on the driver's side for the sol reason of visibility. When looking through the rearview mirror or if you're turning your head you're more likely to see out the back on the passenger side

@autripat 5 лет назад

does this work on a gx470?

@SnailTrail4x4 5 лет назад

That's a good question. It would matter how long the doors are, and if they are different. The mounting process would work but if the doors have a vastly different layout then it wouldn't fit correctly

@Seattle808 5 лет назад

Lol!!! Man with the swing out rear door instead of a hatch??? You would probably need a steel bumper with a swing out that has a ladder welded onto the swing out. That’s the only way I could think of on a GX470.

@SnailTrail4x4 5 лет назад

@@Seattle808 -- oh... I didn't recall that they had a swing out door. I'm not sure they would work for your application. It would be interesting to see.

@Cheesycook 5 лет назад

I am curious how it shows in the backup camera.

@SnailTrail4x4 5 лет назад

Doesn't really bother us

@donncamaticdigital8075 4 года назад

I subscribed before you even told me to.

@SnailTrail4x4 4 года назад

Haha, thanks for the support

@rosscajayon8177 4 года назад

What's the weight limit?

@SnailTrail4x4 4 года назад

I think I answered this in another comment, I believe it's 200-250 if I remember correctly.

@greydenhickle8805 5 лет назад

where did you get your blackout 4runner emblems for your liftgate?

@SnailTrail4x4 5 лет назад

trail4runner.com/2017/07/25/black-emblem-kit-5th-gen-4runner/

@krazmex09 5 лет назад

So it just glues on top? Or actual screws

@SnailTrail4x4 5 лет назад

Tape, but yeah no screws. However it does hook over the edges.

@krazmex09 5 лет назад

But its not easy to get stolen right

@SnailTrail4x4 5 лет назад

@@krazmex09 -- Don't know I don't think about stealing them, are you going to steal ours? It's been so long I can't remember how the bottom bracket assembled. It might be tough to get the bolts off without having the door up. But yeah you can just undo the bolts on the top and if the bottom is off you could lift it off.

@krazmex09 5 лет назад

Obviously i meant if i buy one for 250$ plus shipping i dont want it to get stolen since in getting it for a hummer h3, which are known to get parts stolen. So i was wondering if i should apend 250$ plus shipping for a sticker ladder

@SnailTrail4x4 5 лет назад

@@krazmex09 -- let me double check how the bottom section hooks on. I will see this rig today actually and will let you know my thoughts.

@zhuli693 2 года назад

no need to drill ?

@SnailTrail4x4 2 года назад

no drilling required

@javierherrera9450 5 лет назад

So these are very easy to steal then? hmmmm not sure I'm sold on this one but at least you dont have to drill holes for install.

@SnailTrail4x4 5 лет назад

you cant get the brackets off without having the door up, unless you don't mind causing body damage I guess. But if someone is going to steal them then they probably don't mind causing body damage.

@lambertsaldi1550 3 года назад

Hey bud not level but plum ok 👍

@djplumking 3 года назад

I've been putting off installing a ladder for over a year that takes 10 min to put on? oof... the shame.

@SnailTrail4x4 3 года назад

You can do it! I believe in you

@carlosrbles 5 лет назад

You never climbed or tested it

@SnailTrail4x4 5 лет назад

I guess not on video, but we did. And have climbed on it many times since. It's plenty strong and has a 250 lbs weight limit

@Cobb 6 лет назад

Not even bolt on, its peel and stick install.

@SnailTrail4x4 6 лет назад

Pretty much, yeah. There are some parts that bolt to the stuck pannels.

@graphguy 5 лет назад

uh isn't that scary?

@warweaponx6629 3 года назад

Did I miss something or is this ladder held on by 3M tape? Lol

@SnailTrail4x4 3 года назад

You didn't miss anything

@warweaponx6629 Год назад

@@MrJedi5150 Good point. Thanks

@hikeabike 6 лет назад

first comment

@SnailTrail4x4 6 лет назад

+Josh Titus -- thanks for using the Bell!

@harrymerritt8959 2 года назад

The actual word your looking for is “plum” not level. I bet your garage floor is not “level” which would make your tape line out of “plum”. Even if it is I guarantee your vehicle is out of level due to worn springs, bushings etc. you won’t see your vehicle leaning 1/8 of an inch but you will see the ladder 1/8 out of your vehicles parallel. Not trying to be picky but you sound ignorant. The best way to explain is that you want the ladder parallel to the centerline of the vehicle.

@royf.2471 Год назад

enjoy your video`s but I have always thought that these ladder`s seem like a pointless waste of money. between the rear bumper and the rock sliders like I have, you can reach anything you might want to put up top. I can`t see spending money on something just because it looks kinda cool. they also affect the functioning of the rear hatch so you need to buy HD after market pumps so your hatch door opens like it should.

@williamallenfranklin 6 лет назад

Do the 2 screws that clamp the bottom ladder support dig into the door's paint?

@SnailTrail4x4 6 лет назад

+williamallenfranklin -- no, the bolts on the top section have the double side tape on the back, and the bolts on the bottom push against the small piece of metal that's stuck to the door by more tape.

@harrymerritt8959 2 года назад