SV650 Valve Clearances | LWTRacer.com 

You showed how the front came looks but not the rear im struggling to do timing on the rear

Great video! Would a out of specs valve clearance make the engine not to start? I have 2000 sv650 that doesn't start at this moment. I have spark, good compression, and fuel. I even tried starting fuel straight into the carbs with no success. In the past it would start right away. Thank you

Great vid mate, do you check sv1000 valve clearance the same way?

There’s no way my bike would ever run again if I took it apart

can u send link for this box with shims?

Do you have a video to tell the difference between cam chain rattle and main engine bewring or piston slap. Mine doing a slapping / knocking noise from front cylinder.

How much more work would it be to remove the actual valves themselves and check they're not bent/tapping if cam timing was off ?

When removing cam chain tensioners, do you remove the base with the two screws to the head or just the center bolt , spring and tensioner itself?

how many miles did you have on the engine when checking? when was the valve clearance last checked?

Why are you ok with the intake valve being at 10 thou if the clearance is stated at .004-.008? First!

@LWT RACER do i have to drain the oil from the engine to do this?

Do you prefer to be on the tight end or loose end on valve clearance?