First valve check Part 1 of 2, cam removal is on part 2 This is how I check and adjust the valves on a 2015 v-strom 1000 Link to gas tank removal • 2015 Vstrom 1000 Gas T...
Hello, thanks for your great video. I have a 2023 DL1050 with 15,000 miles on it. Thanks to your vid, I was confidant I could handle the valve adjust easily enough. I was a professional airplane mechanic for 29 years, and worked on motorcycles for 10 years before that. So I’m not really a backyard mechanic, I have a lifetime of experience. But this was my first time on a V twin. I purchased and read the Suzuki factory service manual, watched your vid several times and figured was ready. It all went just like the manual and your vid showed. Was easy and straight forward. Had to adjust all 8 valves. They were all in spec, but at the very min spec. I wanted them looser than that. After getting it all back together with new plugs and coolant. started it up, and while no bad noises, it was only running on the front cylinder as verified with an infrared heat gun. I took it back apart and verified yes, all the cam timing marks were exactly according to the manual. Any ideas on something I could have missed? Appreciate any advice or tips you could offer… Craig
Hi Craig, glad the video helped you! I'm sitting here trying to think of what could have gone wrong... When you removed the rear cams did you turn the crank to the front timing marks on the flywheel? other than that, the only thing I can think of is maybe a loose sparkplug wire or a wire that wasn't plug back in. If I think of something else I'll reply back again.
Thank you for your reply. I really appreciate you still answering questions years after you posted this vid. To follow up, I took it all back apart, and everything was perfect. I didn’t change a thing, put it all back together exactly the same, and it ran perfect! Still no idea why it wasn’t firing the rear, but it is now! Thnx again@@VStromGarage
V-Strom Garage does it again ! Helped with valve adjustments on my 2008 DL1000 from your previous Valve adjustment videos.. Sold that now I'm considering a 2018 VStrom.
Excellent timing, chap - my 2018's due imminently! Good to see better wiring protection above the rad too, as the 650s of that MY suffer in that location. 👌🏻🙌🏻
great video mate. the bike shop is doing my valve clearances in a couple of days on my 2018. hope they are as thorough as you, and they dont fuck it up. maybe i should get them to watch your video first. 👍
Thanks for doing these videos. Have you done a video yet for the spark plug change? I have a '14 and think I'd like to do my 4 plugs in the next couple months. Thanks.
Hi. Great job, as all your DIY vids. I have a doubt. Which coolant do you use? The spec is 50-50 coolant, but, any other spec or can I use a standard OAT coolant? Regards
I believe I used Toyota red coolant mixed 50/50 in this one. as long as it's silicate free and one other thing I can't think of, you can use it in the motorcycle.
great video as always amigo, thanks for sharing this info... just one question how many miles or kilometers did have your bike when you did the valve adjustment?? Best regards from Chile!
As long as they are the right size, brand doesn't matter. Rocky Mountain ATV is where I get mine from. They also sell half sizes if you want to get really precise.
hello, with my 2004 model dl 650 motorcycle, when I go with 6 gears and 4000-4500 rpm with constant speed, it gives FI C-45 fault code. When I go at 5000-6000 rpm, there is no problem. What could be the problem?
Excellent, I just purchased 2014 Vstrom 1000. Great condition but does have 15,800 miles.Ialso have 2007 sv 650 I purchased new , great bike. Anyhow I live in Los Angeles, Ontario. Ca. area. Could you recommend someone professional and prominent like yourself who could help with valves on my 1000 ?
Sorry I didn't get back sooner, but I don't really know anyone in your area. I would say ride it to Vegas and we could get it done, but it looks like I will be busy for the next 6 weeks.
Thankyou for answering back. I've checked valve clearance on my sv 650. May try at least checking rear head on 1000 Then take it in to one shop that's done work for me before. I appreciate it, take care
It's a big deal.. I ride r1200gs and 1050xt.. I have to disassemble the bike like that and adjust the valve gap.. In r1200gs, you only need to loosen 4 nuts to open and adjust the engine.... It's a big deal. ... Should I do the same in a few years?
the only way to find out is to use a leak down tester on each cylinder, if you hear air coming from the airbox it's your intake valves, if you hear air from the exhaust pipe it's your exhaust valves, and if you hear air from the crankcase it's your piston rings. Remove the oil filler plug to hear the crankcase.
@@VStromGarage sorry I forgot my manners that you for your info and your videos most helpful. Do you have a video on the problem I have ore a head rebuild pls
