Swingline Deluxe Heavy Duty Stapler Review

Подписаться 215

Просмотров 24 тыс.

50% 1

Swingline Deluxe Heavy Duty Stapler review and troubleshooting. I will show you how to open the stapler and two ways to clear the jams.
If you find this video useful, please donate $1 here: paypal.me/trygeek
Buy the correct staples for this stapler on Amazon amzn.to/2PVteS7
Buy on Amazon amzn.to/2VZgOJE
Buy Needle Nose Pliers on Amazon amzn.to/2VZh7Ei
Try Amazon Prime 30 Day Free Trial amzn.to/2HYrLY3

Хобби

Опубликовано:

19 янв 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 9

@GG-bl2vm Год назад

Awesome thank you. This was perfect.

@mkjgry Год назад

Glad it helped you.

@simpleagency Год назад

Thumbs Up

@BobJacobson 3 года назад

My problem is that the jam occurs in the slide under the handle, not the pressure point. There's no way I can reach in from behind, tap it from in front, or otherwise dislodge the staples. I suspect also that the stapler has bent inside by a frustrated former owner. In any case, consider an alternative model by Swingline or another brand before buying this one, in which case you're asking for trouble.

@mkjgry 3 года назад

When I had this problem recently I pushed the little lever down in the back like I was going to load staples normally while at the same time pushing the stapler down all the way like I was stapling something. It came loose after that, It seemed like the little plunger that pushes the staples with the spring on it got under the staples so they wouldn't allow the plunger to be removed. Anyway this worked for me I hope it works for you.

@PipenFalzy Год назад

How to load it?

@mkjgry Год назад

On the back of the stapler at the base of the arm theres is a black knob or fitting. This fitting is connected to an arm and spring that holds the staples in. Push that in or down and it will release a catch, then you can slide it out. Now you should be able to load the staples in where you just pulled the black knob out of. Now reinstall the black knob with the spring on it and it should work fine.