Table Saw Accessories: Harvey Sliding Table!

Подписаться 68 тыс.

Просмотров 58 тыс.

50% 1

Link to the Compass ST-1500: www.harveywoodworking.com/pro...
Hey Everyone! I have a had a crazy year and didn't get to post as many videos as I have been planning. Life can take you on some crazy rides as your family goes through the seasons and your kids get bigger and busier!
I recently partnered with Harvey Industrial and will be showcasing some of their products here on my channel as I upgrade my shop and table saw! Starting out, I am adding the ST1500 sliding table. Stay tuned as here in a few months, I will review this table and share my unbiased thoughts and opinions. I will also be adding the RT-685 router table and MG-36 miter gauge! If you have a table saw that is lacking in certain areas, stay tuned!
I have updated my website and have all of my plans here: www.creevesmakes.com
Support my channel and the brands that support me!
Affiliate Link to my Amazon Shop: www.amazon.com/shop/creevesmakes
Thanks for watching!
Social Media Life:======================================================
Be sure to Like, Subscribe, and Follow me on the following social media platforms as well! Website - www.creevesmakes.com
Facebook - creevesmakes
Instagram - creevesmakes
Twitter - creevesmakes
Music: ====================================================== Via Epidemic Sound: www.epidemicsound.com/
Chapters:
00:00 Introduction
00:27 Unboxing
00:52 Assembly
01:24 Installation
03:07 Setup
03:39 Test Cuts
04:08 Conclusion

Хобби

Опубликовано:

1 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 64

@toriankirland383 9 месяцев назад

Makes beginner happy

@Cliozeek Год назад

Hey Casey great review. Looking at buying my first Sawstop table saw and wondered if the one in the video is the 30" or 36" PCS Model? I have a small shop and wondered if by adding the slide on the left side if you could reduce the table size on the right. Just looking for some advice.

@RobbieMan75 Год назад

I’m curious with the slider and the cast iron router cable is it still easily movable on the industrial base?

@korrupt4 5 месяцев назад

thanks for the great video! thinking of pulling the trigger on this. How deep can this crosscut? Thinking of using it to square up cabinet parts so 24'' deep.

@stevepoetzl986 Год назад

What is that out feed table in your saws top? Do you have a video on that or is it purchased?

@guitarin_around Год назад

When this table is flush mounted, what is the max cross cut capabilities? I know the standard can cut 48", but I can't seem to find information on the max cross cut when this table is flush mounted. Thanks

@derekhollingsworth9604 9 месяцев назад

Thanks so much for doing that video. I have the 36" PCS as well and am looking at sliders. For me it is either the Harvey or the Sawstop sliding crosscut table. I am wondering why you decided to go with the Harvey. Any specifics?

@CReevesMakes 8 месяцев назад

I actually used to have the SawStop version and didn’t care for the slop in it. I couldn’t get rid of it either. The Harvey is much smoother and easier to tune in the areas that were issues on the ss.

@1987gnXtreme Год назад

If you do a follow up video, can you show how easy it is to put it on and take it off the table saw so you can use the table saw with out the slider? TYVM

@CReevesMakes Год назад

Will do!

@1987gnXtreme 4 месяца назад

@@CReevesMakes any thoughts on the follow up video?

@AlAmantea Год назад

Casey, that looks like a gret addition to your saw! Do you know if they have other versions available for different saws?

@CReevesMakes Год назад

Thanks Al! It is! The table has universal bolt patterns for a variety of saws OR it can easily be drilled.

@AlAmantea Год назад

@@CReevesMakes Awesome! I gotta get something like that for myself!

@warped_woodwerks Год назад

I have a SawStop PCS and was thinking about adding this sliding table to it. Great video and can't wait for the follow up video!

@CReevesMakes Год назад

Thanks and glad you liked it! Thanks for watching!

@jeremymcclanahan2389 Год назад

congrats

@CReevesMakes Год назад

Thanks! I’m looking forward to puttin some hours on it!

@gregsnow5303 Год назад

Interesting MFT outfeed table. Is that just an out of the box MFT sitting behind your Sawstop?

@CReevesMakes Год назад

Good eye! No, I actually had two tops to my ACS as I cut through one on accident. I cut that one down and made the mini Outfeed section you see in the video. It is connected to my existing ACS table via some Kreg adapters.

@jayjaghla7310 Год назад

I loved this attachment and then found the price. $1200 😵‍💫 I could think of a ton of other shop upgrades that I need to do before splurging on this. Nice video though! I’m new to your channel and enjoy the content.

@CReevesMakes Год назад

Yeah its pricey but its sooo nice when making larger cabinet based builds. Thanks!

@davidlynch7666 Год назад

Beats the hell out of an actual sliding saw’s price tag

@foodparadise5792 Год назад

I thought it was only the sliding table part for 1200 but it actually comes with an over sized miter gauge then it's not that bad. You have to factor in other real sliding table saw cost in the $8000~$9000 range. I was thinking about the lamello jointers which cost $2000. $1200 for this table, big chunk of precise machined metal, it really not that much.

@guitarin_around Год назад

TODAY ONLY.. it is $950 + tax & ship. About $1,130 delivered

@AlexK07010 Год назад

definitely interested in follow up review video. Side question how do you like the Jet bandsaw that showed up in the video?

@CReevesMakes Год назад

Thanks Alex! As for the bandsaw, I really like it. I had the older Jet 14" (with riser block) but still couldn't hit the resaw capacity that I wanted. This one has been a gem as the dust collection is much improved and the table is nice and big. Thanks!

@AlexK07010 Год назад

@@CReevesMakes Thank you. is that JWBS-14SFX?

@PhongNguyen-kq2oq Год назад

That is one nice sliding table! What is the thickness of the sliding assembly? thx

@CReevesMakes Год назад

I will measure and let you know! Thank you

@jamram109 Год назад

Are they priced the same as the sawstop version? What are the benefits vs the Ss model?

@1987gnXtreme Год назад

From what I have found in talking with lots of people on this exact subject is that Harvey actually makes these for SS. And the Harvey comes with accessories that the SS don't. Also, you can catch the Harvey on sale for around $1,199.00 (actually right now). I have never see the SS on sale, ever and I think it's like $1,399.00. or more.

@CReevesMakes Год назад

Yes, very closely. They are actually on sale right now.

@CReevesMakes Год назад

Yes, I actually owned a used SS for a while and it didn’t have some of the features that the Harvey did and I couldn’t lock it 100% to the slider like you can on the Harvey. Agreed, more features with random sales (like right now for $1199.00) and better customer service.

@1987gnXtreme Год назад

On sale right now for $999.60.

@guitarin_around Год назад

@@1987gnXtreme Today: $949. :P The fun never ends.

@jeonjaebong6300 3 месяца назад

Where can I buy it?

@marquisbois990 Год назад

Actually that looks great. Pity they cost more than my TS did though! With shipping and taxes to France it’s over 2000euro! Bummer

@CReevesMakes Год назад

Oh wow! That’s crazy expensive! Sorry to hear that!

@garyheurich6835 Год назад

What brand tablesaw do you have, please?

@CReevesMakes Год назад

SawStop PCS 3hp

@garyheurich6835 Год назад

@@CReevesMakes Thank you. And, for your review on the sliding table.

@bazinga2527 Год назад

The problem with Harvey is they are sending all this free stuff to RU-vidrs to demonstrate. I ordered a dust collector and if said it would ship in about a month in a half. again I knew it ahead of time so I had no issue. They charged me fully instantly and it posted. A week later I decided to go with Oneida. I cancelled and they wanted to keep 5% for cancellation. I don’t care that it was their “policy”. It handing shipped and wouldn’t for 90 days so I shouldn’t have been charged. It shouldn’t charge until it ships.

@BeaulieuTodd 3 месяца назад

That’s the law in MA, but not all companies abide. I notice the same thing when, seconds after pulling the trigger, my wife got a text and turned to me in horror. “Six thousand dollars?!”

@mpe777 Год назад

That's one beauty. I'm sure you're loving it. Just one question. I'm curious as to the full width of the table end to end with the sliding table. Thank you for sharing that information in the video.

@CReevesMakes Год назад

Thanks! The overall width of the entire saw is roughly 86-1/2” sliding table edge to the new router insert edge.

@mpe777 Год назад

@@CReevesMakes Ok. Thank you for that.

@isaquesaqueetop7564 10 месяцев назад

Como chama esse paralelo

@markshipman4864 Год назад

Wearing gloves while using a Sawstop defeats the reason for having a Sawstop, doesn’t it?

@CReevesMakes Год назад

So does not putting your hands near the blade. 😏

@markshipman4864 Год назад

@@CReevesMakes My point is that - accidents happen. That blade brake won’t trigger if you’re wearing gloves. I do like this addition to your saw. Thanks for the video.

@1987gnXtreme Год назад

@@markshipman4864 if the blade goes through the gloves it will trigger.

@keithruffner7168 6 месяцев назад

Haha Harvey really pushing this they giving every content creators it I’ll pass but good video

@jeffhildreth9244 4 месяца назад

Gloves while using a table saw, you can't be serious.

@CReevesMakes 4 месяца назад

I love these comments.

@markkulyas2418 Год назад

Lose the background music

@miguelangelblanco4290 Год назад

Con sierras no debes usar guantes.Saludos

@darrylkennedy2125 Год назад

Or you could always do what I did and buy yourself a long table Italian sliding table saw either SCM or Casadei. Then cut 2400 X 1200 sheets up easily.

@CReevesMakes Год назад

That’s sounds like a great option but a little out of the scope of my shops footprint! The nice thing about this, is I can easily take it off if needed.

@dngriffiths8105 Год назад

@@CReevesMakes Great video and very intriguing product. (Like you, I have a Sawstop PCS, and so this represents an alternative to Sawstop's own sliding table.) What would be involved in removing it? And, when re-installing it, would that then require more time spent checking that it's still all level and square to the saw & blade? Thanks.

@darrylkennedy2125 Год назад

@@CReevesMakes get a bigger shop.

@1987gnXtreme Год назад

@@dngriffiths8105 That is my question as well. I have seen lots of videos on this sliding table, but no one shows how long/difficult it is to put on and remove. I am hopping he does a follow up soon showing this. OH, just found out this table is on sale right now for $999.60 on their web site till this Friday (Mar 31).

@guitarin_around Год назад

@@1987gnXtreme Yeah... I was taking too long to decide and missed out. 😢 "Next time."