Тёмный
No video :(

Tablesaw Fence Measuring Tape Fix (WnW  

Wordsnwood (Art Mulder)
Подписаться 46 тыс.
Просмотров 18 тыс.
50% 1

I put this off way too long!
⇊ Click “Show More” for Stuff you probably want to know! ⇊
I’ve needed to replace the adhesive tape on my fence for a long time.
It’s really not that big of a job: Rip off the old one, clean the fence, mark the zero position (roughly), slap on the new one, and adjust the pointer to fit.
Project Page: www.wordsnwood....
---------- ---------- ---------- ---------- ----------
LINKS TO SOME OF THE ITEMS USED:
(AND/OR other tools and jigs that I use and recommend.
Most of these are affiliate links. If you buy through these
links it helps support my channel. Thank-you so much!)
I can’t remember where I bought the rule that I used, as I’ve had it in the drawer for several months.
goo.gl/qEfQTC - here is some adhesive rules at Lee Valley (non-affiliate)
amzn.to/2p4Jd4e - Several adhesive tape measures Amazon
JIGS/ACCESSORIES
amzn.to/25Iw4t6 - Long Nose pattern marker
amzn.to/1V4ZHkv - Painter’s Pyramids
amzn.to/2aSUhbR - Dowelmax Dowel Joinery Kit
amzn.to/2b6sCly - Dowelmax Drill Guides for 14” Dowels
amzn.to/2jSdHAq - Dowelmax dowels
amzn.to/2bfFjLh - Kreg Pocket Hole kit (I have an earlier version of this)
amzn.to/2beVc8N - Long Ranger Remote controls for Dust Collection
amzn.to/2nbD1W4 - Freud Box Joint Cutter Blade set
SMALL TOOLS
amzn.to/1pFGjPk - Sensgard ZEM hearing protection
amzn.to/1WSNq1j - Stanley Leverlock tape measure
amzn.to/2lYXz3W - Other auto-locking tape measures
amzn.to/1TzHwEp - Picquic “multi-bit” screwdrivers
amzn.to/1YP3rXy - Irwin Quick-grip XP600 clamps
amzn.to/1LleENk - Bessey small 4” F-Clamps
amzn.to/1qbopUK - Bessey VarioClippix, Adjustable Spring Clamps
amzn.to/2aqt0u4 - Ridgid 12v drills
amzn.to/1UegW3W - Hitachi 10.8v drill/driver kits
amzn.to/2aRaSJY - DeWalt Random Orbit Sander
amzn.to/1jlEmnL - Hitachi M12V router (I have an earlier version of this router)
amzn.to/2egwuDl - Porter Cable PC690 router with fixed base.
FINISH:
amzn.to/2beVz3t - Minwax oil-modified Polyurethane
amzn.to/2aNBHBi - 3M Super 77 spray adhesive
amzn.to/2b6uuLc - West System Epoxy kits
amzn.to/2daa1VK - Helmsman Spar Urethane
amzn.to/1TdiBp8 - Rust-Oleum clear Lacquer
amzn.to/2kPENLs - 3M Finishing Pads / Scotch Brite
amzn.to/2endTXX -- Clapham's Beeswax salad bowl finish
goo.gl/oedkrB -- Same thing at Lee Valley (non-affiliate link)
BIG TOOLS
amzn.to/2bpMmkX - DeWalt DW735 Planer
amzn.to/2beSIY6 - 3rd party blades for DW735
amzn.to/1QFDLYE - Delta BOSS Spindle Sander
amzn.to/2aRa6wD - Grizzly G0513ANV 2 HP Bandsaw (I have a similar earlier model)
GEAR I USE TO MAKE VIDEO:
amzn.to/1qPkvBp - Canon T5i
amzn.to/2aK7jZX - Inexpensive Quick Release tripod ball head (Very useful)
amzn.to/1SSwOmS - Sony Action Cam. (I use the HDR-AS15 which is discontinued -- cheaper than a gopro.)
amzn.to/267XM3M - Sony Live View video remote for Action Cam
amzn.to/1XC2D7l - Joby GorillaPod (Flexible small tripod)
---------- ---------- ---------- ---------- ----------
Many more woodworking projects:
www.wordsnwood.com
PLEASE SUPPORT MY CHANNEL
The best way that you can help support what I do is to buy one of my woodworking plan packages.
Details here: wordsnwood.com/...
Follow me on Social Media:
/ words.n.wood
/ wordsnwood
---------- ---------- ---------- ---------- ----------
Thank-you!

Опубликовано:

 

24 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 44   
@kstone8292
@kstone8292 7 лет назад
Nice video. If everyone in Canada is as nice as you seem to be, Canada must be a wonderful place. Thanks for sharing.
@PhoenixRevealed
@PhoenixRevealed 7 лет назад
Two quick comments... first, I would have gone straight for the Goo-Gone to remove that adhesive because it works great and never takes off paint or damages plastic. Also, Varsol and mineral spirits are two different things. Love your channel... cheers!
@timpedersen2106
@timpedersen2106 3 года назад
Goo Gone is better at taking off adhesive than mineral spirits. Great video. I wasn't sure how I was going to replace mine since the original part was originally expensive and is no longer available.
@Wordsnwood
@Wordsnwood 7 лет назад
I put this off way too long! Project Page: www.wordsnwood.com/2017/fence-tape/ I’ve needed to replace the adhesive tape on my fence for a long time. It’s really not that big of a job: Rip off the old one, clean the fence, mark the zero position (roughly), slap on the new one, and adjust the pointer to fit. Thanks for watching! ----- ---------- ---------- ---------- ---------- LINKS: I can’t remember where I bought the rule that I used, as I’ve had it in the drawer for several months. goo.gl/qEfQTC - here is some adhesive rules at Lee Valley (non-affiliate) amzn.to/2p4Jd4e - Several adhesive tape measures Amazon MORE TOOLS AND JIGS THAT I LIKE. (Affiliate links) amzn.to/1WSNq1j - Stanley Leverlock tape measure - love these! amzn.to/2lYXz3W - Other auto-locking tape measures amzn.to/1pFGjPk - Sensgard ZEM hearing protection amzn.to/1TzHwEp - Picquic - some of the best “multi-bit” screwdrivers around. (But get the ones with Robertson tips!) amzn.to/25Iw4t6 - Long Nose pattern marker amzn.to/1V4ZHkv - Painter’s Pyramids ---------- ---------- ---------- ---------- ---------- GEAR I USE TO MAKE VIDEO: amzn.to/1qPkvBp - Canon T5i amzn.to/2aK7jZX - Inexpensive Quick Release tripod ball head (Very useful) amzn.to/1SSwOmS - Sony Action Cam. (I use the HDR-AS15 which is discontinued -- cheaper than a gopro.) amzn.to/267XM3M - Sony Live View video remote for Action Cam amzn.to/1XC2D7l - Joby GorillaPod (Flexible small tripod) ---------- ---------- ---------- ---------- ---------- Many more woodworking projects: www.wordsnwood.com SUPPORT MY CHANNEL? The best way that you can help support what I do is to buy one of my woodworking plan packages. Details here… wordsnwood.com/plans/ Follow me on Social Media: facebook.com/wordsnwood instagram.com/words.n.wood Thank-you!
@garij98
@garij98 7 лет назад
Wordsnwood (Art Mulder) iii
@deftone4019
@deftone4019 7 лет назад
I see your Nail and Gear in the background. The one true flag! Hello Internet is one of my favorite podcasts to listen to in the shop.
@Wordsnwood
@Wordsnwood 6 лет назад
Hello Tim!
@coppedl
@coppedl 7 лет назад
General may be a great Canadian company with the proper screws, but did they in fact make a fence designed to rub off the numbers? You made me smile this morning. Thank you.
@Wordsnwood
@Wordsnwood 7 лет назад
coppedl that was not the original tape, did I forget to mention that? shoot.
@coppedl
@coppedl 7 лет назад
I guess then you set it up before to rub off. Like I said you made me smile this morning so you are still my hero!
@joshmyer9
@joshmyer9 7 лет назад
They probably had it so close to the tape to avoid parallax error and/or keep sawdust out from under the pointer. More likely the latter, since variance in the blade's kerf probably exceeds any parallax error you'd get. It will be interesting to see how the gap works out after a year or three of use.
@drmkiwi
@drmkiwi 7 лет назад
Isn't it amazing how many of those "easy to do, don't take much time" jobs pile up and then when I actually get them done and some process is so much easier I ask myself "why did I put that off for so long?".
@FishersShop
@FishersShop 7 лет назад
Hey Art, thanks for the video. Question, is that a home-made riving knife in your saw? Do you have a video for that? I was going to make a video of a home-made riving knife that's built into the throat plate since my saw doesn't have one.
@Wordsnwood
@Wordsnwood 7 лет назад
Fisher's Shop it is a splitter, not a riving knife... there is a very basic web page on my web site from years ago. wordsnwood.com/2002/j.splitter/ maybe I should make a video tour...
@FishersShop
@FishersShop 7 лет назад
Perfect thanks!
@JohnHeisz
@JohnHeisz 7 лет назад
Imperial only works for me :) I never did like those plexiglass pointers. I much prefer a flat edge solid pointer to line up with the marks.
@Wordsnwood
@Wordsnwood 7 лет назад
Yeah, we're a dying breed...
@GJ11598
@GJ11598 4 года назад
This may be a stupid question, but new to the table saw and have to put on a new measuring tape as well, however my fence has the marker on the left, not the right. Is it the same process? I will be keeping the fence to the right of the blade, but unsure of how to properly set up the tape for this?
@Wordsnwood
@Wordsnwood 4 года назад
same process. the fence still moves to the right, so you start with the fence on the right side of the blade, that is the zero mark.
@cmeyers3231
@cmeyers3231 6 лет назад
Great video , thanks
@ForwardGuidance
@ForwardGuidance 7 лет назад
I should upgrade to a better table saw so I can get a nice fence (old craftsman saw). I really don't know what it is like to have a fence that is rock solid. Your fence appears rock solid.
@Wordsnwood
@Wordsnwood 7 лет назад
D Dixon rock solid. one of the best there was, IMHO
@harrychristie8107
@harrychristie8107 Год назад
Goo-gone rarely works. WR40 works in just about every situation. Spray,wait,remove and repeat. Can usually push adhesive residue off with a paper towel.
@stephentownsend7379
@stephentownsend7379 7 лет назад
Happy #100
@Wordsnwood
@Wordsnwood 7 лет назад
Stephen Townsend thanks, Stephen!
@fyanezc
@fyanezc 7 лет назад
Wouldn't have thought of using washer...awesome, thanks for sharing.
@KaliBlaz
@KaliBlaz 5 лет назад
i can spot Canadians across youtube just by looking at their tools LOL "mastercrap" is one of them..
@clydedecker765
@clydedecker765 7 лет назад
I know its already done but get a can of Ronson lighter fluid and every time you have glue goo to remove use it instead of the other things. NOTHING works better and it will NOT mar the finish or interfere with finishes.
@tolomjagroopjohn7185
@tolomjagroopjohn7185 7 лет назад
what brand table saw is it
@Wordsnwood
@Wordsnwood 7 лет назад
tolomjagroop john general international
@kevinlyver5351
@kevinlyver5351 6 лет назад
Just updating a new to me saw (same fence, and King Canada saw). Previous owner had zero at the blade, and that made no sense to me. I'll be moving my zero to the T-Square indicator.
@meaznet
@meaznet 7 лет назад
FastCap makes a tape that has both imperial and metric, even better one side is left to right numbering and the other side is right to left numbering.
@VinnieC262
@VinnieC262 6 лет назад
New to the woodworking game but isnt the saw fence more than an inch away from the tape measure 0 mark. You have that tape measure zeroed like 3 inches from the blade???? Help me figuring this out???
@Wordsnwood
@Wordsnwood 6 лет назад
All that matters is that the distance is fixed with respect to the fence. It would make sense if you are standing by the saw. When the fence is 4 inches from the blade, then the pointer points at the 4inch mark on the tape measure. When the fence is 2 inches from the blade, then the pointer is pointing at the 2inch mark on the tape. Hmm, let me try a different way. We set the fence so that it is touching the blade - that is the zero mark. Then we set the tape up so that it is also at a zero mark. Then if you move the fence 1inch, then the tape should indicate 1inch. The distance of the tape from the blade is irrelevant in this case.
@KSFWG
@KSFWG 7 лет назад
Sometimes it's the little things...
@TEIS3210
@TEIS3210 6 лет назад
arent you forgetting to subtract the sawblade thickness?
@Wordsnwood
@Wordsnwood 6 лет назад
At least twice I mentioned zeroing the fence against the sawblade...
@bobbg9041
@bobbg9041 3 года назад
Canadian fence????? Goo??[
@Wordsnwood
@Wordsnwood 3 года назад
You bet!
@shaunbeard593
@shaunbeard593 6 лет назад
Would zero not be the cutting edge of the saw blade
@Wordsnwood
@Wordsnwood 6 лет назад
Zero is when the FENCE is against the blade, which is what I did.
@shaunbeard593
@shaunbeard593 6 лет назад
Sorry I'm new to this I thought zero point would be edge of tape tight to the blade
@Wordsnwood
@Wordsnwood 6 лет назад
Remember, you're measuring the position of the fence. If I want to rip a 2" board, then I need the fence to be 2" from the blade. So when the fence is tight to the blade, the tape reads zero, and when the fence is 2" from the blade, the tape reads 2".
@shaunbeard593
@shaunbeard593 6 лет назад
Wordsnwood (Art Mulder) thank you so much for your help
Далее
Making My Own Plywood for Refacing Cabinets in Cherry.
14:40
Best Fence Peel & Stick Tape Measure
11:24
Просмотров 2,3 тыс.
7 Must-Have Table Saw Upgrades
9:52
Просмотров 276 тыс.
Crucial Table Saw Alignments and Adjustments
14:31
Просмотров 140 тыс.
Table Saw Fence - from mercedes details | DIY
14:33
Просмотров 20 тыс.
Table Saw Self Adhesive Measuring Tape Install
12:48
Просмотров 32 тыс.
How to Fix a Broken Tape Measure
28:13
Просмотров 35 тыс.
Easy! Make Runners for Table Saw Sleds!
10:54
Просмотров 639 тыс.