Tailstock Die Holder! Let's Make One!

Подписаться 223 тыс.

Просмотров 193 тыс.

50% 1

This episode on Blondihacks, I'm making a tailstock die holder for the lathe. Exclusive videos, drawings, models & plans available on Patreon!
/ quinndunki
Buy Blondihacks stuff in my store! www.blondihacks.com/store
Here are links for many of the tools that you see me using:
(I earn small commissions on these links)
• Mill clamping set : amzn.to/2xc9vqr
• Thread checker : amzn.to/2xgO2gc
• Chamfering Tool : amzn.to/2IJsAUs
• Zero Flute Chamfering Tool : amzn.to/3bmPLPe
• NOGA Deburring set : amzn.to/2Jv3RlW
• NOGA Reversible Deburring Tool : amzn.to/2X07WX1
• Knurling Tool : amzn.to/2FblXb1
• Tapered Reamer : amzn.to/2Gn0b3G
• Nicholson files : amzn.to/2VcHkls
• Nicholson needle files : amzn.to/2BDt7ph
• 1-2-3 Blocks : amzn.to/2EvAsGq
• Dormer center drills : amzn.to/2X7U6ij
• 6” Divider : amzn.to/2GTncM3
• NOGA arm with magnetic base : amzn.to/2U2bGTI
• NOGA arm Big Boy : amzn.to/381acji
• Collet Block set : amzn.to/2UkF1vZ
• DeWalt drill and driver kit : amzn.to/2Gp6IeJ
• DeWalt portable band saw : amzn.to/2U4Mhsw
• DeWalt band saw blades : amzn.to/2H2J4X0
• High Speed Steel parting blade : amzn.to/2YcdYBv
• High Speed Steel blade holder : amzn.to/2JgO0IK
• High Speed Steel tool blanks : amzn.to/2H1qoqr
• Grizzly Pre-ground tool bits : amzn.to/2H4yr5z
• AXA tool holders : amzn.to/2V1gOHl
• Quick Change Toolpost : amzn.to/310mshq
• Norton oil stone kit : amzn.to/2EbLEH3
• Norton small sharpening stone: amzn.to/2PQwex9
• End mills : amzn.to/2U76Vsf
• Milling machine starter pack : amzn.to/2tA2M4e
• Forceps : amzn.to/2Ww5dFT
• Mill Parallels : amzn.to/2lfW82i
• GearWrench ratcheting tap & die set : amzn.to/2lMwZfV
• Step bits : amzn.to/2q54yfJ
• Starrett automatic center punch : amzn.to/2DCI7C9
• Budget transfer punch set : amzn.to/2yfDgHi
• Precision shim stock : amzn.to/34lJlME
• Jet 2-ton press : amzn.to/2SLas1s
• Gear Wrench locking puller : amzn.to/2ubBV1W
• Starrett tap wrenches : amzn.to/35jxM9e
• Goldenrod oiler : amzn.to/2TTS0En
• Acid brushes : amzn.to/36qWCo5
• Cratex (Bright Boy) block : amzn.to/38fNm72
• Scotchbrite deburring wheel : amzn.to/3ks0P2V
• Fein Turbo I shop vac : amzn.to/2vXpech
• Loc-Line (1/2”) : amzn.to/2U7JznB
• Loc-Line Pliers : amzn.to/2vWlXKf
• Machinist’s scale : amzn.to/2Zk6oVj
• Mixed metric/imperial dial caliper : amzn.to/2KKARYY
• Mitutoyo dial caliper : amzn.to/2IMIxJE
• Mitutoyo micrometer set : amzn.to/2GtICPx
• Mitutoyo depth micrometer : amzn.to/33M8aSH
• Mitutoyo edge finder : amzn.to/2G36omq
• Mitutoyo dial indicator : amzn.to/2H09gBr
• Mitutoyo dial test indicator : amzn.to/2E5lRQw
• Coaxial indicator : amzn.to/3bbBEwE
• Mitutoyo telescoping gauge set : amzn.to/2Z6houn
• Fowler dial bore gauge : amzn.to/2KQJNf2
• Fowler inside micrometer : amzn.to/2TVm7Jo
• Starrett 98-6 Level : amzn.to/38K7lMD
• Grizzly Height Gage : amzn.to/2PDTr7i
• Thread Checker : amzn.to/2CpvAUU
• The Amateur’s Lathe book : amzn.to/3jIYlwe
• Anchor Lube : amzn.to/2H9X6oQ
• Boeshield T-9 : amzn.to/2TCE0wB
• Brownell’s Oxpho Blue : amzn.to/2YhZTmR
• JAX Metal Blackener : amzn.to/2MVe8wj
• Dykem layout fluid : amzn.to/2U7KQts
• Dykem dauber : amzn.to/2uoXtbm
• Tap Magic cutting oil : amzn.to/37uYzRS
• WD-40 : amzn.to/2GYV8rY
• Super 77 Spray Glue : amzn.to/2YScxZl
• Loctite 603 : amzn.to/2EYsPbi
• Loctite 242 : amzn.to/2RIt3sQ
• Way oil : amzn.to/38Gl9qW
• High pressure grease : amzn.to/2GloHTd
• CMD Extreme Pressure lube : amzn.to/36JPNy9
• Dry graphite lube : amzn.to/2U0YEZH
• 3-in-1 oil : amzn.to/36in43e
• Kroil : amzn.to/2uCf1RL
• Evaporust : amzn.to/36NSkII
• Brasso : amzn.to/3buE6yL
Commenting policy : blondihacks.com/commenting-po...
Want more content like this? Try these places:
Blondihacks on Instagram : / blondihacks
Blondihacks on Twitter : / quinndunki
Blondihacks on Patreon : / quinndunki
As an Amazon Associate, I earn from qualifying purchases.

Наука

Опубликовано:

6 ноя 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 302

@sharkrivermachine 3 года назад

FYI, my grandfather was a top notch Tool and Die maker. The first tool that he taught me to make was a tailstock die holder. When I got his tool box, after he retired, it had several simple tail stock die holders in it with his name engraved in them. You beat me to this build so maybe I will use your design on my next one. This will become clear when I up-load my next video. Thanks for sharing.

@j-claudedrouet9854 2 года назад

74-year-old retired Journeyman tool maker. After 30 years in the trade, I went into outside tooling sales for my remaining ten. A well-rounded career! I've seen many individuals come into the trade. Few were exceptional, and some were, um, an embarrassment to the trade. I've watched your videos with rapt attention and will say that you are special. You have an eye for detail, and that shows in your finishes. I have seen very few women in the machining trade, especially with your grasp of knowledge. Keep on shining! Calude

@JustJimWillDo 3 года назад

17° = 17° I mean, really, where would we be without you Quinn. Eternally grateful for your work.

@camerashy44 3 года назад

Quinn, so nice to see you putting the Wilton Vice to use...exactly what I was hoping for!

@Blondihacks 3 года назад

It’s amazing! Such a beautiful piece

@44mod 3 года назад

I am a poppy of 3 smart ,wonderful grand daughters. They are 11, 10 and 7 years old. They love working on their dads dirt race car. I show them your videos all the time and I say, this is what girl power can do. I tell them to never let anything hold them back. Their dad is a welder/fabricator, we are trying to encourage them to do things outside of the box ( like going to a trade school), so far they are very interested. My wife and I love to watch YOUR videos, because of how you explain how and what you are doing. We also watch Cloug 42 and you both compliment each others videos. Keep up the good work !!

@rachelpanth5527 3 года назад

I never thought I’d get in to machining! But I’m proud to say I bought my first lathe today (a precision Mathews import lathe similar to yours) and can’t wait to try it out! Thanks for inspiring so many women like me! It excites me to see a future with more women in STEM fields!

@Blondihacks 3 года назад

Congrats on the new machine! 😀

@macornman 3 года назад

Congratz! How are you liking the machine?

@rachelpanth5527 3 года назад

@@macornman It has been great! I’ve mostly been working with brass and aluminium and have only occasionally tried steel but no parting just yet! As much as I’ve enjoyed lathe work I am only just realising how much I “need” a mill, bandsaw and a million other things. So it’s fair to say I think I have a few more tools coming my way! It’s just so addictive taking a boring hunk of metal and turning into something functional. My favourite was the machinist hammer, I followed Quinn’s video on it and have produced quite the beautiful little device!

@larryschweitzer4904 3 года назад

@@rachelpanth5527 The rabbit hole is very deep! There is always something else you "need" for this hobby. But a mill is a "necessity."

@johnmcclain3887 Год назад

@@rachelpanth5527 I've been doing this fifty years, once you've discovered "how everything is made" you find you need everything. I began because I was working on motorcycles, and couldn't afford parts. It was way late I realized how great it was to make all the ancillary equipment. I've only done it full time after I retired. Never pass up free raw material! Cutting metal demonstrates how everything is made.

@bustednuckles2 3 года назад

It's kind of amazing just how much information you transfer in one of these videos if you are paying attention. Nice job on that little unit!

@plm2ajm 3 года назад

Quinn, wow! Such a simple tool, but you made it look fantastic too! I'm going to make one as soon as I can get back into my work shop.

@timbrocklehurst875 3 года назад

Wow! I've never been this early for a Blondihacks video! Or any video come to that. Quinn, your videos make my Saturday night!

@dwightcarlson7136 3 года назад

Excellent presentation! No wasted words but still lots of very informative comments including options and reasons for the choices made.👍👍👍👍

@naturalorang3 3 года назад

Thank you for converting 17° imperial to metric.

@firebird8600 3 года назад

Yay!! It's Blondihacks time! (And I'm actually home to watch in time this week)

@firebird8600 3 года назад

I really should get myself a lathe... so many neat things I could make...

@joemcgarry1106 3 года назад

Another great video Quinn. I have been power tapping with the same Jacobs chuck in a Bridgeport for 40 years.

@viktorkunz189 3 года назад

The chuck key on a strip near the vertical drill is a brilliant idea, thanks for it!

@nicholashacking381 3 года назад

".... everything else, you can just wing it..." Music to my bodging ears. *This* is a project for me. Thanks.

@vanOverload 4 месяца назад

Thanks for doing the metric/imperial thing in a nice way. I really appreciate you translating the sizes and giving it a funny spin instead of heating up the everlasting discussion.

@hokepoke3540 3 года назад

I really enjoyed watching this video. Even after over 50 years as a machinist I can say I learned something new, most of the time I use my Bridgeport to drill holes like that with a dividing head. Now I can use my drill press. Thanks for the nice video.

@djowen895 3 года назад

Thank you so much for sharing your work i am a beginner and have learned so much from your vids . I love watching and your attention to detail is fantastic , much appreciated

@cliffordfender1159 3 года назад

Really liked this project, it was a great watch. Thanks!

@steveskouson9620 3 года назад

Quinn, first, just one more STELLAR video. One of my favourite Machinists to watch, and DEFINITELY, the prettiest! As I've made 62 trips around the sun, I know the expression, "Bob's your uncle." Not sure everyone does. (Surprising, since I'm a Colonial. [American.]) steve

@taranson3057 3 года назад

You are never boring. You're awesome!

@templer4295 3 года назад

Thanks for listing everything you used for this video in the comments, with links......very helpful!

@joecolanjr.8149 3 года назад

Always wanted to make one of these...thanks for giving me the push to finally do it!! Great video Quinn!!

@tomt9543 3 года назад

I made three failed attempts at the tap follower before admitting I suck at machining! Then I saw mr Pete’s version and had wonderful success! All my friends and family are getting one for Christmas this year now! Good to be able to “tap” my resources! Ha!

@therookofchess 3 года назад

Merch idea "I was taught by a blond"? Love the video my set is to small for this lol

@Nobilangelo 3 года назад

You say you are Canadian, but the results of your work show that you are also fine finish.

@TheRadioShop 3 года назад

Very nice and less boring than you think!

@jodyvanliew2514 9 месяцев назад

I really like all the thought that went into the setup to do the operations on the drill press .

@taylandag2891 3 года назад

I really appreciate the imperial to metric conversion for the 17 degrees.

@mattmckenzie8212 Год назад

Thank you for this. I had a simple, but not simple, component to make - a hex bar with a 1/4 - 24 RH thread on one end and LH thread on the other. The thread turning video got me cutting both threads on a practice run and then the backup dies arrived for the final piece. I had a tailstock die holder, but naturally it only had inserts for imperial sized dies and, despite being 1/4 - 20 the two dies that arrived were 20mm. So, following your process, I was able to make a new holder insert for my tailstock die holder, and the piece is now finished. Yay. Thank you again!

@edgeeffect 3 года назад

I often use an ordinary die holder on my lathe and because the handles bang against the bed I have to take one off, do half a turn, put it back on, take the other one off......... yada yada yada..... the Tommy bar in this holder is truly a gift from god.... or at least a gift from Quinn.

@howder1951 3 года назад

Excellent project, the die holder is probably one of the most used tools in the workshop, If all you have is those crappy carbon steel dies you usually have to single point the threads and then finish to size with a die. I think I shall follow your lead and use the cold bluing more often, it does give it a "pro" look, I think. Cheers!

@jdm2651 3 года назад

Nice! Plenty of tips and good practices. By coincidence today I began working on my own which will be a bit different mainly to better adapt to a much smaller lathe.

@david676adghj 3 года назад

I've been waiting for you to make one of these. Excellent video . Thanks

@TheTacktishion 3 года назад

As always, good video. A useful shop tool project. I did some experimenting with Brownell’s Oxpho Blue recently. I used a cotton ball saturated with Brownell's, and wrapped some 0000 steel wool around the cotton ball. I then rubbed the steel wool on the surface while squeezing on the cotton ball at the same time. What this did was to give me a more consistent less "splotchy" finish. Buff with a paper towel and apply T9- Boshield.... If it weren't for this channel, I would not have even known about Brownell’s Oxpho Blue...!

@metalplane3 3 года назад

Love your stuff! Very fun and professional!.

@gordon6029 3 года назад

Awesome little tricks today. Thanks Quinn.

@Neptune730 3 года назад

I worked for a company that manufactured medical diagnostic machines. I mostly ran a manual lathe. I made a die holder with an insert for 2 die sizes as well as taps. It was a production shop and I used it quite often. Taps from 2-56 to 5/16-18.

@scottrowlings5345 3 года назад

New project for the kids at school, thanks Quinn!

@MrCubflyer 4 месяца назад

excellent I need to make one of those . I do appreciate that you do some of these projects without a mill because I don't have a mill its nice to see it done that way with a drillpress.

@alansmith2197 3 года назад

Hi Quinn, loving your videos 🥰 They're such a charming and refreshing change, particularly in the current climate. My engineering days ended 40 years ago, but I still understand the tools and principles you show. A big thank you, from an avid fan 🤗🇬🇧

@dazecars2415 3 года назад

Love your videos, I have learned so much and really appreciate them!! I was thinking about your tap follower and this die holder and had an idea. You could put a compression spring between the body of the tool and jacobs chuck. That way you could use one hand to hold the tool and one to hold the lathe chuck. Just an idea.

@mlgboy1 3 года назад

Fantastic tutorial. Cant wait to make myself one of these. Thank you for sharing.

@kenh8979 2 месяца назад

That is a very good video and a good tool. If I'd not already made something like that I'd have to make another. Good job

@8023120SL 3 года назад

There’s no such thing as scrap metal, there’s just bits of metal I haven’t found a use for yet.

@MeansOfProduction209 Год назад

That's exactly what I tell my wife to justify the pile of scrap I have I in the backyard 😆

@ehinders2000 3 года назад

I use a tailstock die holder at work quite often for the smaller threads (M6 and under) especially on longer threaded sections where its not worth the hassle of programming out tapers from deflection, etc. If its a really long thread you can start by screw cutting so that it doesn't wander off centre then finish it by chasing it with a die.

@motleypixel 2 дня назад

6:26 I knew Voltron might have be an influencer...channel makes sense now. Wonderful content, thank you for this superb channel. 10:47 sort of has ears like Voltron too :)

@Clough42 3 года назад

Very nice. I love the result you get with the Oxpho blue. I have a bottle sitting on my dining room table, looking for an excuse to use it.

@tomt9543 3 года назад

Just for shits and grins, try some on the wife’s silverware and give us a report! Ha!

@markh2005 3 года назад

You know its a good vid when Sprocket gives her opinion!

@pedalcarguy 3 года назад

Lovely content as always! I definitely need to make a couple of die holders. Thank you for the recipe and the subliminal cat. I also need to get one of those machinist's tombstones!

@irishwristwatch2487 2 года назад

Im a toolmaker by trade and Im deffo gonna make one of these! We've got jobs ranging from M3 all the way up to 1"! I also made a copy of your fly cutter - it leaves a fantastic finish! This is next on my list after a two-piece vice is finished. That floatlock vice is looking good too after a piece of half inch plate nearly took out out a rib or two after a very sketchy grab....

@matthewphillips1728 3 года назад

Another excellent video, Quinn you always make it look easy and fun. An it was “Boring” in any way what so ever. 😎🙏🙏

@RonCovell 3 года назад

Excellent - as I have come to expect from you!

@steveskouson9620 3 года назад

Yep, Quinn ROCKS! steve

@samcoote9653 3 года назад

:O Ron is here!?

@cav89- 3 года назад

I can hear Quinn saying to herself: “Aaaaand from now on I will get extreme performance anxiety bouts whenever filming, editing and uploading a new video thinking about Ron’s expectations”

@flyalawishes 3 года назад

Good video, thanks. I’m going to make one. Years ago I knocked apart a dead hard drive for the extremely powerful rare earth magnet inside. It sticks to the top of the face of my drill press, holding the key in place. One only needs to toss the key in the general direction of the magnet.... no key dangling on a string. Too easy to get used to :-)

@moorejl57 3 года назад

Fellow software engineer who finds solace in the mechanical world away from computers. I need to start turning steel with my Sherline lathe. I haven't really played around with 12L14 steel yet and this would be a great project for that. I have to confess I also have a Sherline mill that I put stepper motors on, but used double shafted ones so I could mount the hand cranks for manual operation. I find without some kind of control, I lose count of rotations.

@Austeration 2 года назад

Great stuff thanks for sharing your knowledge. Great explanation and easy to follow instructions. 👍

@johnkoury1116 Год назад

Fantastic build. New subscriber and I love the build.

@aleksandernordgardenrdner1520 3 года назад

From one afficionado of dad jokes to another; I really enjoyed them, and didn't find them boring in the slightest!

@chrisj4570g 3 года назад

That trick with the adjustable parallel.... brilliant.

@BasementEngineer Год назад

For small thread dies, say up to # 10 or 1/4-20, I left off the tommy bar but knurled the holder body instead. Thus, for these threads or smaller I grasp the holder in my hand while power threading. When the desired thread length has been achieved I let go of the holder, which then turns freely with the threaded part. This gives time to switch off the spindle and remove the die off the work piece. As I said, I knurled the od. If I were to make another one I'd leave off the knurl and simply mill some axial grooves around the od using a ball-nose endmill. And file a radius at the edge of each groove! This is much easier on the fingers! If you have a lot of threading to do, such as making special material screws or model-sized hex head screws, a Geometric Die Head or similar is hard to beat. These cost an arm and a leg new, but used ones can be gotten reasonably priced. Make sure you get as many thread chasers included as possible, certainly the size you wish to use immediately. These are fairly expensive, also. Note that these chasers are very easy to change in these die heads.

@MermaidSystem 3 года назад

I've made a few of them in my aprenticeship but with some minor changes. The holder it self is knurled and instead of normal screws i used fulls sunken grubscrews. The benefit of this changes is, i can use the lathepower to cut the tread and when the tread is deap enough i can just let it go. And this things are used in production for small runs because it is faster than single point and better when you have ton of unsupportet material.

@couchforgecompany1134 3 года назад

Great Idea, excellent video as always.Nice Job

@karenstein8261 2 года назад

If I may suggest a lathe project: Make a center punch specifically for marking holes for mounting hinges. Such a tool would be made available f two pieces: an alignment/holder and a punch pin. The holder’s nose would be beveled at the same 72 degrees as used to n flathead screws. Simply pressing the holder onto the screw hole in the hinge would center it over the hole. There would be a long bore through the holder for the punch pin, I imagine this part being either hex stock or knurled, from 3/8” to 1/2” diameter. Hex stock won’t roll off the workbench. The pin could be something as simple as a large common nail, slightly longer than the holder. To use: Place holder, insert pin, tap pin to mark.

@brianmoore1164 3 года назад

Love your channel! I watch a lot of RU-vid makers, but you have the same sort of equipment that I have and that makes you a valuable resource. Of course I wish I had a huge shop with $100K worth of tools in it, but I spent my career in the military which means I will never have that kind of money. Despite that I make cool stuff and do it at a level of precision that is remarkable for a guy in the corner of his garage. I might have a couple ideas for you. My KBC dies are made in Poland and they are a match for any of the bigger more expensive names. YG-1 makes drill bits and taps that far exceed many that have famous names and big price tags. Suncoast tools out of Florida has fair prices and stunning service. Take care and thank you for the great videos.

@justinjones8744 2 года назад

i like that i just may have to make one for the sake of it its simple and does the job i saw another with a grove in the side but didnt like that one Great work my friend i will check out your other videos great tutorial thanks.

@BrianFullerton 3 года назад

17 deg ~= 17 deg....classic! Hopefully that does not awaken the cancel imperial units folks; I fear the days when some will insist all inhabitants of the world do all angle measurements in radians.

@daveholub8045 3 года назад

I thought a metric circle has 100 degrees.

@BaldurNorddahl 3 года назад

Sorry but 360 degrees is older than both metric and imperial. It is a 5000 year old base 60 system: en.wikipedia.org/wiki/Sexagesimal

@Spectral_Penguin 3 года назад

@@daveholub8045 a metric circle actually has 400 Gradians

@BrianFullerton 3 года назад

@@Spectral_Penguin I knew that was coming! Nicely played!

@jimsvideos7201 3 года назад

But but but radians are as easy as pi!

@theamateurmachineshop2150 3 года назад

Very good video. Looks like a great tool have and like your design. Will have to make one eventually and will take note of your design! Thanks

@lynnbryant9866 3 года назад

Very nicely done. Thank you for sharing.

@craigtate5930 3 года назад

Great setup on the drill press

@josefkrakel9136 3 года назад

Boring has a Zen-like quality to it. I like it. It is not "boring" to me. Perhaps I am the exception.

@dakavanagh Год назад

I've just watched this a second time because I'm ready to make one for myself. Got the lathe set up, and I have some 1.75" steel stock, so let's go! (off to Patreon to find the drawings)

@JohnBodoni 3 года назад

That opening pun just earned you a subscriber.

@toolbox-gua 3 года назад

Another joyful class!

@stanfordcoffee 3 года назад

I like the idea of a 1 " holder on one end and 13/16 " on the other. Plus when save room in your shop (1 instead of 2 tools). Cheers

@tman19971 3 года назад

13/16ths not to be an ass

@stanfordcoffee 3 года назад

@@tman19971 Corrected.

@UncleKennysPlace 3 года назад

Was gonna whip one of these up, as I need to make a mess of standoffs to install the ELS on my lathe, when I realized I only have ancient Hanson Ace dies, which are hex. Never crossed my mind. Off to Mr. Pete! He'll know a neat cheat.

@homemadetools 3 года назад

Good job as usual. We posted this video on our homemade tools forum this week :)

@DogofW0r 4 месяца назад

Quinn, I LOVE your videos and I love your explaining for the Layman but you have to remember a lot of us Hobbyists don't have a lot of the equipment that you have. I know you want to show us how to do everything perfectly but if you could do videos using the bare minimum of equipment, that would be awesome!

@terrytopliss9506 3 года назад

Nice job Quinn.👍👍👍

@tman19971 3 года назад

I just want to point this out Quinn I am a tool maker by trade and use a rigid die holder in the tail stock all the time for short threads. If you are making a rigid ( no slip fit shaft ) put a clearance hole though it in case you run into a thread length longer than you bore behind the die.

@improprietary1 3 года назад

the brass tubing on the hand wheel is a neat trick.

@chrismitchell7801 2 года назад

Great explanation!. Cheers, from New Zealand

@paulmorrey733 3 года назад

Thanks Quinn

@randynovick7972 3 года назад

Pretty neat! ... Fun to watch, too!

@devster52 3 года назад

You do know, of course, that I can no longer part anything off on my lathe without at least thinking the magic word not to mention doing the tappy, tap, tap thing on my mill.

@smellsofbikes 3 года назад

Totally started doing this, yep.

@eric802 3 года назад

Same. "Aaaaand..."

@HorsleyLandy88 3 года назад

I think tappy tap tap when using my mill :)

@MagnetOnlyMotors 2 года назад

Nice stuff, Quinn.

@house89147 3 года назад

Ok the boring joke was (meant to be) a bit cringe but who gave a thumbs down, this is always one of my highlights of my weekend (and yes therefore week). Thanks for another great video Quinn.

@kentuckytrapper780 3 года назад

Job well done, thanks for sharing.

@donyboy73 Год назад

I need to make myself one of these!

@davedunn4285 Год назад

Loved it Quinn

@AmateurRedneckWorkshop 3 года назад

Nice project and well done.

@kostasstamatakos1230 3 года назад

some nice moves here! I would consider using a 90° square when aligning the collet block instead of the adjustable parallel. It seems easy to make a mistake there...

@mhe0815 3 года назад

Quinn, these tutorials are pure gold for the inexperienced like me. What's your opinion on James' electronic leadscrew project? That would save a lot of switching greasy gears for those of us who haven't been blessed with mechanical gearboxes in their lathes.