At 3:58 it shows that the brake lines are on the front of vehicle side of the shock, and then all of a sudden, they are disconnected from the axle and on the rear side of the shock. This would also require the brake line be removed from the forward bracket. This is not mentioned in any of the instructions that I can find, and it doesn't make sense to put the lines in the Teraflex anchor bracket routing the lines from the front..... It also looks like there would be plenty of slack for articulation without the lines being routed behind the shock. Any ideas or recommendations?
We mount the lines behind the shock because that is where the lines are further away from getting pinched or rubbed on by any of the moving components.
Somebody help ! I have put these 3.5 inch springs on my Gladiator. I just purchased the springs. The springs looked identical, but had two different part numbers. There was nothing explaing the different part numbers, in the directions. The springs do not seem to be lining up right after instal.Especialy on the passenger side, I can not connect my swayer. Is there a left and right spring?
@@teraflexsuspensions I sent an email didn't receive a response. So I actually called in today. I took it to a local shop 4x4 shop. Im not sure it's right. It might be, but man it sure rides rough.
