THE CHEAT CODE TO RIFLE RECOIL CONTROL. 

Mojo rocking that Dirty Civilian 🤌🏻

My softest shooting rifle is a 12.5” Gordon with OCL OCM5 suppressor - Bootleg BCG - Blue SprinCo spring - H2 buffer It’s by far my softest shooting. I plan on using Bootleg BCG on anything shorter than 14.5”.

Hey Mojo, try out an upper with a Riflespeed adjustable gasblock. You don't have to use a tool, just use your fingers to rotate the knob. Only cons is the added weight on the fore end, compatibility of handguards, and rail estate loss.

For my dedicated suppressed guns I prefer BRT EZ-Tune gas tubes. I tried the Bootleg BCG in one of my guns and on anything other than the wide open setting my gun wouldn’t lock back after the last round 100% reliably. So in that specific instance I just couldn’t take advantage of the BCG’s tuning capacity so I just sold it to a buddy.

I’ve been preaching on these BCGs forever and people criticized me because “a good properly gassed gun doesn’t need adjustable anything” regardless this makes my suppressed and even non suppressed guns shoot so well I swear by them have many 1000s of rounds through them!! Good on you for making a video on them!!

Anthony rockin that Parkway Drive🤌🏼

When tuning a rifle, mass and springs are the last step, not first. Sprinco will tell you to control the gas drive before fine tuning with buffers and springs. Black River Tactical Ez-Tune Gas Tubes are the easiest and cheapest way to change your gas drive.

I ran a Bootleg for 2 years on my 11.5. It was fine and definitely lowered recoil. But it still vents a lot of gas out of the ejection port. once I was ready to re-barrel my gun, I went to a 12.5 midlength gas, with a riflespeed adjustable gas lock,a Sprinco blue spring, and H3 buffer. It’s been about 2 years and it’s been phenomenal. Runs like a race horse, actually lowers the blowback and I can actually tune my gun to my individual suppressors to lower the ejection port blast at the shooters ear. And it’s a super robust system with definitive clicks that have never been accidentally adjusted or come loose. In my backup gun, I run a BRT EZ Tune gas tube.

Ive personally tried all the diffrent aetups over the years . What works beat for ke when running gassy Can is BRT EZ TUNE 0.073 Middy Gas Tube . This is my current setup.. BA 13.9 Hanson , BRT 0.073 EZ Tube , Springo Blue , H2 and YHM Turbo K . In getting 0330 ejection and with very little gas in my face ( lefty long gun ahooter ) and my gas rings are lasting when non suppressed.. Before i was changing rings wvery 500 to 700 rounds . Im nkw well over 2.5k and they are GTG. BRT tunes need to be swapped every 10k rounds . I usually buy 2 of them to last the full cycle of barrel before it needs swapped . Im not a fan of Adj gas Blocks so the BRT was no brainer . There is some slight tuning involved but nothing that cant be figured out in 1 range trip .

I’ve been running the same bolt carrier for 2-3 years in my 10.3 work rifle with the Hux 556 TI. I have the Sprinco blue Spring with a H3 buffer in it. On unsuppressed setting two with a clean/lubed gun I can get approximately 500 rounds on it before I start having short stroking issues. I then switch it to unsuppressed setting one and it runs fine dirty. Even on unsuppressed setting one the recoil is minimal and surpasses my expectations.

BRT 50/50 gas tubes is my go to $60-$70 and it gets the job done super easy to install if you have a lmt also

BCM 16” ELW BFH Stock spring H2 Buffer Bootleg BCG set to suppressed and Turbo K 3,500 rounds with zero cleaning or malfunctions on XM193. My main AR15 and home defense gun.

It is a very good addition to a traditional DI rifle, especially a shorter rifle with carbine gas tube. If you want the full experience, try the Bootleg in a piston upper like the LMT.

Thanks for the tip. I want to tame my MK 18 and have tried buffer systems. Can’t wait to run the bootleg. Awesome content.

for me this sounds dope because i have a pinned and welded 13.7 and i didn't put an adjustable block on it. ill be ordering one of these bcg

I need that Parkway Drive sweater

I've been using the bootleg adjustable BCG for a couple years now. Really great

I have the bootleg BCG and like it. Only issue is that it does increase at war decibels especially when suppressed. Not a huge issue but something to be aware of

I have this in my AUG and it’s amazing.

Anthony is the Miles Teller that we have back at the armory (at home)

Looks like something I might research further on. Thanks for the info!

I like my PWS for this purpose. Suppressed on setting 3 with a Sprinco Blue and H2 is a laser beam

So I fixed the gas issue by getting a OSS/Huxwrx can. No overgas, and I'm not breathing carbon in like a baffled can

Aside from the tool con of an adjustable gas block I prefer it over this bcg. Like said above it still has a good amount of blow back but better than not having the ability to adjust imo

Running one on both my ar10 and ar15 setups…. Best purchase I’ve made for either rifle

Hey check out AT3 Tactical AR-15 Heavy Buffers - H1, H2, and H3 Buffers. They have a rubber plastic spacer between the weights and it really helps with recoil and getting better accuracy. It is super smooth like Spike tungsten buffers, but better.

Works for 300blk also, use the none suppressed setting or you will blow primers and casings. It works on mine and i run suppressed on a 7.5”

Hey mojo we actually look forward to the 80’s retro intro Put it back neeeeow 🤣🤣

PWS mod1 mk2 ftw. While this vid doesn't apply to me, I watched it to the end. Go MOJO!

Y’all should try the kak Bcg I’ve gotten zero gas to the face.

3:09 might be the cleanest reload ive ever seen

Can yall do a review on the Cobalt Scrambler? I’ve been wanting to buy this can but no real info on it.

Told my buddy that just got a BCM to go this route but instead he wanted a adjustable gas block and has only had problems with it since he installed it.

Great vid! Any 2024 Gear rundown coming out or agilite belt experience/review?

My 14.5" FN shoots super soft with a red sprinco spring and H3 buffer. No adjustable gas block. Just a lo pro BCM one.

Have you tried a sharps adjustable bcg? I’ve had luck with mine and it allows you to have finer adjustments

TF is with these weird comments…bots aren’t even trying. I like that the settings in the BCG work with different gas setups. Might try one.

Mojo if you guys tried the Armaspec stealth capture buffer? That was the solution to the back end for me and I agree the bootleg BCG is the answer for gas

Good solution, but how many weapons these days don't come with an Adjustable Gas Block? All my AR Platform firearms came with an factory adjustable gas black.

I’ve been pretty lucky, a lot of my stuff has been fixed with playing with buffer weights.

On that 14.5 did you guys notice if you had to step down in buffer weight to get it run right in the suppressed settings? I have a 14.5 with a carbine length gas system, RC2 and a Super42 with an H3. Unsuppressed setting it worked fine. Suppressed setting it would short stroke.

I personally tried the Bootleg BCG and sold it. Now I get HDSI suppressor optimized barrels, and BRT EZ tune on my older gassy guns. But if I were to want an adjustable DI rifle I would use a quality bleed-off adjustable gas block. Why wouldn’t you want to bleed off the overgassing *before* the gas goes thru your gas tube and hits your BCG? Wouldn’t you stop a water leak as close to the source as possible?

I have one of these. It works super well. It's simple and easy to change the settings. Out of curiosity Mojo whats your highest round count on one of these bcg's?

The Bootleg bolt is a game changer.

I have these in two rifles. Their biggest advantage is minimizing gas from blow-back suppressors. Idk what they have to do with recoil.

Ngl the ooga booga got me 😂😂😂

Superlative arm’s adjustable gas block works fine on my rifle. Would this further improve or will I run into more problems.

Stock 14.5, mid length and H1 and I have the literally best shooting AR I've shot and I didnt change a thing

I made it 19 seconds, idgaf about adjustable gas blocks

So do you prefer this over an adjustable gas block? AGB will prevent wear on the BCG in the first place.

My kac cqb is still overgassed with the bootleg carrier such a pain

Hey Mojo, i saw the clip of the carry handle rifle, how are you liking it and what are some issues you ran into?

I just want to know where these nice shooting spots are? Former LE and marine here asking please!!

Did you show the bolt carrier and how it works?

Riflespeed adjustable gas block

Just here for the Pontiac Vibe cameo

What did mojo mean by bolt head space?

Isn’t an adjustable gas block cheaper and just a little more effort to install?

How have the bolts held up over high usage? My bootleg bolt has 6k on it and curious how much longer it has. They’re s7 so I would think they hold up awhile

How do you buy these parts while in Washington state?

I have the bootleg on a DD MK18 upper but my dust cover won't close.

Hey mojo could you try out yhm suppressor gas block. Its $20 and theres no vids on it yet

You guys noticed any malfunctions with the dust cover closed? Under slow mo I can see my dust cover being violently forced open by the vented gas which causes it to bounce back up to the near closed position causing a failure to eject with the cover closed.

Is changing the BCG not the wrong way to solve over gassing. The correct solution would be to get a correct gasport size and gasblock tuned to the suppressor.

What is the optic/scope mount setup on the rifle on the right?

Milspec_Mojo, I am a sig sauer p320 guy carry one all day every day, what is your take on the p320s "going off on their own"? Since I see you with the PMM tardigrade upper. Are you a blade safety on your p320 trigger or stock trigger and internals? I personally believe all these incidents are user-induced discharges such as shirts, holsters, and or something in the holster manipulating the trigger unintentionally, along those lines.

Is that a Unity flip to center Mojo is using? Curious how he is able to make that work with a Scalarworks mount for the red dot optic..

Can you run any bolt on the bootleg bcg

Well done

Can the carrier be tweaked with a case rim from a cartridge?

The settings were designed around a carbine spring and buffer, so just ignore the manual since u probably already have a Sprinco/geissele/tubb spring and an H2+. the settings are actually as follows: 1. Unsuppressed 2. Best option for 99% of shooters 3. Horrifically overgassed setup 4. Now you are just being a big baby

Would you recommend it if your not running a suppressor? 13.9

I sure wish I would get my cans! It has been almost 2 months! So much for them 1 to 2 weeks, lol! That's about my luck, tho!

Is the bolt proprietary to the carrier?

For the same price get the rifle speed gas block. They're AMAZING, way better than that BCG.

Hey Mojo for a stock BCM that is not suppressed with a milspec buffer tube would this BCG still work or is it only for suppressed guns? Side bar what happens if you put it in an unsuppressed gun that is gassed normally?

Will it work fine if you have muzzle break on your ar?

I just want to know where I can get those NATO Woodland pants that Anthony's wearing... 👀👀

run a tubbs flatwire spring. the G braids are a waste of cash

Awesome content!!!!! I’m using the SilencerCo lbp flow through can. Has anyone tried this bcg with this suppressor ? Thanks!!

Does anyone know what mojo is using to drop his taser lower? What company makes that belt attachment?

Mojo, how are you able to buy BCG’s in commie Washington?

We have an identical jeep liberty on our range 😂

Bro what height is your dot at on the 1.93 skalarworks that you’re able to clear it with a unity ftc?

Does it help with gas to the face?

Kac are the best tuned rifles

Does this work with un suppressed rifles

Geiselle 11.5 with braided spring and h3. Runs flawlessly suppressed or not.

How is long term reliability compared to a milspec bolt? I like the riflespeed but it adds a bunch of weight to the end of the weapon. So im still running superlative gas blocks for now.

Whenever mojo upload, i like

3:13 this foo lol

How does the bcg fair for us left handed people

Good video

What’s the round count on them? Suppressed and unsuppressed

Bro i have not seen one of your vids in a while

Sharps SAGRS Adjustable Bolt Carrier Group in DLC So much better hands down. Yeah little longer to adjust each time but no thing. I run pinned solid non adjustable gas block so if ima adjust this is the way to go. Yeah best thing tuning your gas tube itself but no one got that kinda scratch. Bruh you can cop the sharps on a sale for almost same price way better materials design all that son.

I love my bootleg bcgs

Imagine being afraid to use an adjustable gas block 😂.

Does the bootleg BCG work with the Vltor A5 buffer system or do you need to use an H2 buffer?

The secret is to be yoked enough to squat 250 below parallel or a suppressor for -10% recoil stat