The FINAL part of the Yamaha BWS Malossi Build - The Drive [Part 3] 

We know Jeremy Pincus very well, He does some awesome builds! We want to do some crazy builds like that soon for our own scoots! Stay tuned!

We haven't had any issues over the years in keeping the stock jetting. Just make sure you don't make any changes to the stock airbox and filter. If you add a reed block, it does benefit to go to the 76 main jet[from the Nitro], up from the stock 72.5. (Sea Level settings) But the full benefit will come from fitting a reed valve and 22mm carb. What pipe are you planning on fitting to your scooter?

@@urban_riders not sure at the stage just looking around at the moment don't want to lose too much reliability

Hey there! With all the mods and especially the exhaust the lighter rollers allow the engine to spin up faster and get into the power band quicker. The heavy 11g rollers work best with the stock setup.

I bought a variateur malossi bws. Do I ride it as it is? 6 rolles 11gr. Knowing that the muffler is original, Yamaha 4vp.

You could find them on our website, we ship nationally!

Almost! Maybe with someone more skilled or a little more tuning 😂

It is a little weird. But the air cooled motors are not tuned for insane performance, so it’s harder to get more power.

Hopefully soon! Need to find who wants to do it!

28mm is going to be better. But as a “daily commuter” the 22mm is perfect.

We don't have an rpm sensor to check but it handles the top speed very well, Stays within the power band and has a lot of torque at speed which is great!

@@urban_riders thanks. Could you do a vid from standstill to top speed?

@@P2DAPIPE we hope to! Will need to chat to Clayton 👀

Definitely! The variator helps transfer that power better to the back wheel. Alot of power is lost through the drive and the performance variators help increase the power.

Surprisingly no complaints yet 👀😂

We still have a lot of adjustments we can do. But definitely many changes depending on what Clayton prefers

Yes we do! You can drop us an email for a quote. Find our email on our about page!

For all Malossi parts it would be around R22,000 in South Africa

I’m not too sure, but if the multivar fits the clutch might, you need to check your bell housing is the same. The bws is 112mm

@@urban_riders thanks for your reply! I hope it will fit!

I’ve hit 140.

@@ClaytonReichlin what setup ?

This is Clayton’s Scooter. I will have to see if we can get a GoPro on it soon!

Guys here in Florida consistently hit 120-130kmh with 70cc builds. That said we're talking the highest end of parts 2fast, S6 r/t, MHR etc. It's pretty wild tbh.

Very nice series 🤙🏼

Or maybe titanium??