The Go FAST Build Begins! - Traxxas Slash RC Drag Car Project - Part 2 Front Assembly | RC Driver

Подписаться 220 тыс.

Просмотров 96 тыс.

50% 1

Wow, we had no idea how popular this build would be, but the views for part 1 of our Traxxas Slash RC Drag Car Project have been climbing rapidly. We’d like to thank everyone who took the time to watch and now we’re on to part 2. We’ve been working on a lot of stuff at the shop and have finally been able to circle back around and work the Drag Car and we start off the build at the front end. In this video Greg talks about the changes made to the front to widen it’s stance. Talks about changes to the shocks, shows off the LCG chassis and more. This is going to be a multiple part build, so if you want to turn your Slash or other RC truck into a street drag car, you’ll want to follow this series. Please allow ample time for us to finish part 3. Thank you!
PRODUCTS SHOWN
Traxxas Slash- 58024
Traxxas Alum. Steering Blocks- 3636A
Traxxas Alum. Caster Blocks- 3632A
Traxxas Alum. Shock Caps- 3767A
Traxxas Turnbuckles 58mm- 5539
Traxxas Turnbuckles 61mm- 5538
Traxxas Front Arms- 5531
Traxxas LCG Chassis Set- 5830
Don’t Miss A Thing! Follow Us:
Subscribe: / rcdriveronline
Home Base: www.rcdriver.com/
Facebook: / rcdriver
Instagram: / rcdrivermag. .
Twitter: / rcdriverguys
AMAZON SHOP
In our Amazon Shop, we’ve featured all of the RC equipment, tools and supplies we use on a regular basis: www.amazon.com/shop/rcdriver_...
MY VIDEO EQUIPMENT
CAMERA/ LENS
Canon 70D amzn.to/2vGf9fn
Canon 10-18mm lens amzn.to/2vGPKlO
iPhone 7 Plus amzn.to/2w8HfD9
Techno Super Wide Angle Lens amzn.to/2i4LbyH
ACTION CAMERA:
GoPro Hero 3+ amzn.to/2uZSgkZ
AUDIO:
Rode Videomic Pro amzn.to/2vGIFS2
LIGHTING:
Photo Studio 3 Softlight Set amzn.to/2vGYBUu
EDITING SOFTWARE:
Adobe Premiere Elements 15 amzn.to/2vGpqbv
COMPUTER:
Microsoft Surface Pro 4 amzn.to/2wOk7H8
TRI-POD:
Manfrotto amzn.to/2wO4uiZ
Joby Gorillapod amzn.to/2wOcWyF
*Notice: Some of our articles, videos and descriptions may contain affiliate links, which means that if you click on one of the product links, we may receive a small commission. This helps support the website and social media channels and allows us to continue to produce content. Thank you for the support!
#traxxas #traxxasslash #traxxasdragcar

Опубликовано:

8 июл 2018

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 84

@paultro8457 6 лет назад

Awesome video!!! These longer vids are great.👏👏👏 I can't wait to see the end result. 👍👍

@rcdriver 6 лет назад

They take so long to make lol. Glad you enjoy them!!

@tobydyes 2 года назад

Your biggest problem is going to be heat from the higher kv

@robertregalado1015 Год назад

I went thru a transformation build of of drag slash from a 2wd older slash. I finally completed it. There were alot of headaches that went with the build. Put bandit rear control arms with the new shorter turnbuckle. Also installed the front slash drag front control arms. Non of the original screws worked. With all the back and forth to the hobby store. I finally came to terms...your better off just buying a drag slash ..which I did. For 299.00 it all complete with motor and esc with a controller. Penny wise I suggest if your jonzing a drag slash..just buy one and save money and time. So I have 2 one I built as a conversion and one out of the box complete. It runs pretty straight right out of the box.

@davidpayne4315 4 года назад

Waayyy cool low budget drag car

@OlExtraRegularBass 5 лет назад

This is actually the only video of yours I HAVEN'T fallen asleep watching out of maybe a dozen. Probably due to lack of music.

@slashraptor9317 2 года назад

Man I love watching these old build videos great stuff

@Ovrkarloss 6 лет назад

Yes Finally I've Been Impatiently Waiting For This

@monolinkster 6 лет назад

YES! Finally a build video!!

@customslashrc2363 6 лет назад

Love this build

@STEVOD313 6 лет назад

I was wondering about this project, a friend n me were just talking about this the other day n was wondering about it n boom here it is! We’re ur ears ringing lol! Was just talking about it n now it’s up a couple days later, ur making us wanna build one of these projects

@robertplaisier8844 6 лет назад

No sleeping here Greg! Great video as always. Keep them coming!

@Nerm78 4 года назад

I am a little late but great series!

@jacklin694 6 лет назад

I'm glad you got back to this one 😀 really enjoying this series

@rcdriver 6 лет назад

Will do my best to keep it more timely.... but I am traveling to an RC event next week....

@munkeynutzmcgrawgaming7581 6 лет назад

Love it man cant wait to get my new slash to to try something like this to i love drag racing them keep it up and hope to see more soon

@leroywalker7825 6 лет назад

Awsome vid that slash is gonna be so cool

@JMOSORT 6 лет назад

Keep it them coming man awesome vids

@JMOSORT 6 лет назад

When I reached the end and you said this is a long video I didn't even notice because of how good and explained the build was done

@rcdragtalk 6 лет назад

Very good video showing how to do a conversion!

@fernsolo 6 лет назад

I just upgraded some parts on my slash recently, this looks pretty interesting, I can't wait to see what wheel and tire combination you're going to use.

@SantoshSingh-nw7jm 4 года назад

Yfjf zed j7dbitx Hd fj l if sxv khd cm BBC CV HK kh c c.b NHS bnb if HK km vigcfja

@dylanruppert2355 6 лет назад

The suspense is killing me lol need to see this thing ripping just subscribe and got the the bell on and liked keep it up man 👍🏻👍🏻👍🏻

@PhoenixRCCrawler 6 лет назад

Two words to make you bumper chop easier. Tin Snips. 👍

@rcdriver 6 лет назад

Excellent tip. I have a couple of sets of snips and have used them for RC projects before. But they are in my garage toolbox and I would have had to walk like a whole 20 steps to get them this time. LOL

@PhoenixRCCrawler 6 лет назад

RCDriver_Online oh I see. That’s just a bridge too far. Lol

@shanecopeland8892 6 лет назад

Yeah your vids are cool you do enough Montage to keep it Rollin but you tell us a lot of good information too by the way I bought a two-wheel drive slash yesterday.. brushless. It's the VXL but I didn't get the t c s so I may upgrade my controller soon

@Shoot_and_Scoot 5 лет назад

Aluminum steering blocks are a must. After you break a few plastic ones you get tired of it.

@bassking991 6 лет назад

if you have the swar bar kit on your old slash.. will it fit on the lcg ?

@tRu028 6 лет назад

Part 2 Finally!!

@MatthewJorgensen1968 6 лет назад

One of the changes I made to my 2wd Slash and Rustler builds was to change the caster blocks to the ones that came on the nitro version of Rustler and Slash. These move the bearings into the wheel hubs and keep the shafts stationary. Does it make a difderence performance wise? No clue, but I like the setup better as a personal choice.

@mocustoms718 6 лет назад

I really enjoyed the video. I got one someone had already started. But dint do such a good job. I took it over and added some vinyl to the body. Now I don’t know what to do ppl love it and tell me not to run it.

@larrythodgson7230 5 месяцев назад

Don't forget to balance your tires.

@thatpepsi-8116 6 лет назад

new sub here!

@TheVandorian 6 лет назад

Nice

@STEVOD313 6 лет назад

GREG PLEASE READ THIS COMMENT! I can’t wait til u mount that hot racing sway bar kit, cus I have one n have no clue on how to mount it, no directions n every video online is someone’s different way of doing it, n none of them r hot racing on the 2wd lcg chassis so please be therow on how to do it, it will help a lot of people!

@cannondxile3180 6 лет назад

Fiiiinally

@looniegaming9419 6 лет назад

I actually run my shocks full of olive oil, it works surprisingly well, and it’s cheap or free coz most people have it in their houses

@omwtfyb4485 3 года назад

Can you put sway bars on these lcg chassis?

@rugger8787 6 лет назад

i he should do blastphemi skin on the 55 chev body

@carsonpomeroy7634 6 лет назад

Rugger 878 yes he'll ya

@mikes062 6 лет назад

Traxxas actually already did that, google it, its sweet!

@gromlooper2243 6 лет назад

What hing pins are those!

@jarreddinkel5648 5 лет назад

on this r/c dragcar project can you please send me the parts list to build it?

@RalfIamrighttherewithyoubrothe 6 лет назад

We need to talk about that Makita drill that you're using😎

@toddschuman5824 6 лет назад

For the nine people that disliked this video you don’t know what fun really is

@stevesorrentino8271 4 года назад

Why did you use the Jato arms and not the Bandit arms

@dirtriderben6553 6 лет назад

I had a lcg chassis like that once and it messed up my steering and I could never turn right. Plus I liked the higher ground clearance

@goldsrcracing5950 6 лет назад

DirtRiderBen Did you make you sure your servo was in the right position, and set straight?

@dirtriderben6553 6 лет назад

@@goldsrcracing5950 yeah. I even had a shop help me look at it and we never found what was wrong

@leoffensive 6 лет назад

what was that metal chassis??

@waynetate6940 6 лет назад

Great, informative video. Just a suggestion, I think you or maybe I missed some part numbers.

@waynetate6940 6 лет назад

*****I meant to ask for a list of part numbers maybe in the last video. Thank you******

@Cato_ism 6 лет назад

Yes

@carsonestrada4397 3 года назад

Could you please do a drag car from a bandit, without a lcg slash chassis. 🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌🙌

@rickysnow7437 2 года назад

Wow you used 80wt in the front?

@darkhellhound1989 6 лет назад

i using 2 velco straps with my slash i modded the chassis to use velco straps

@99ville 4 года назад

I took notes from your build thanks. But my rear wheels won’t spin after 1 day out. My gears are fine the pins are in place. The motor and gears spin and the wheels spin a little when lifted in the air but on the ground just the motor spins. HELP WHAT DO I DO?!

@rattlehead7281 4 года назад

Check the slipper clutch

@kipssosinvestmentpropertie614 5 лет назад

Awesome video. Would you sell me the Traxxas Boat behind you? Looking for one of those with the paint scheme like that for our Autism group.

@brettludwig7701 6 лет назад

Chevy Nova II Body Please!!

@Lab4215 6 лет назад

Just wondering when Part 3 will be up

@gildoegonzo5741 3 года назад

👍🏽👍🏽👍🏽👍🏽👍🏽

@chrisbuttrey 6 лет назад

Why not use the proline chassis?

@rcmadman9401 6 лет назад

Make a drift car from scratch

@briareads1887 6 лет назад

Whens part 3

@benr4677 6 лет назад

Can I ask what kind of drivers you use for you drill? I’ve been trying to find some decent ones for a long time now and have had no luck so far.

@superaidenproductions1870 6 лет назад

Crismas came early this year it looks like

@STEVOD313 6 лет назад

This all looks familiar cus I just built a track slash with all parts from hot racing, strc, proline,traxxas, rpm parts it was over $1k to build but there’s not one part on it that’s not upgraded down to the bearings n stainless steel hardwear, I know I could bought a rtr but I wanted to build something that was made after the dream slash I had in my head, it came out epic!

@jagster0112 6 лет назад

STEVO D 313 I wanna see what it looks like

@STEVOD313 6 лет назад

Jagster 01 ya it should be sweet

@notconnor2512 6 лет назад

Do the drone propellers bother anybody else

@brettludwig7701 6 лет назад

OBA ?

@wyattteet5757 6 лет назад

First comment yay

@lamontgee7167 2 года назад

I need my rc car fixed

@ronsherwood1972 3 года назад

Show show show part numbers

@shannonross1976 Месяц назад

I have a q

@rcmadman9401 6 лет назад

I will pay u all u need to do this to my slash

@rcdriver 6 лет назад

There is a guy on Instagram: rc_motorsports_ that builds custom cars like this for people.

@rcmadman9401 6 лет назад

Thanks

@ericcxxxx 6 лет назад

too wide

@MrBrip23 5 лет назад

Is this for real🤔. I like your channel but when I watch any build I dont want to see your face. I want to watch the build. “Im going to attach the cervo to the column” and I see your face and still have no idea how to do it. Good for you.