No video :(

The MOST COMMON FIX for Polaris Pool Cleaner that isn’t cleaning!

Подписаться 15 тыс.

Просмотров 5 тыс.

50% 1

#pool #poolcleaner #polaris280 #poolmaintenance #diy
Check out this quick and easy fix to get your Polaris pool cleaner back in business! If your Polaris is spinning, stalling in place, or otherwise not moving properly its probably time for new tires. In this video, we will walk you step-by-step through a basic repair tutorial. We will also explain other common reasons for this type of malfunction to help troubleshoot the issue. Be sure to SUBSCRIBE to check out our entire Pool Series playlist of pool-based repair and maintenance videos. Remember, You Can Too!
Replacement Pool Cleaner Tires: amzn.to/3U46sbK

Опубликовано:

5 апр 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 6

@masudkhan7267 9 дней назад

Hi Mr. Greg. Facing the exact issue you showed, but my issue started AFTER I installed new tire treads. All wheels turning, but the back wheel doesn't touch the ground....like in your video the front makes contact and rear just floating up 6 inches. Keeps going round and round and won't climb much anymore. Just so I can understand what you showed, I don't get why a bad tread would keep the rear wheel from going down? I don't get the logic of why that would be. And being that I have new wheel treads and all turning tells me something else wrong. Do I maybe need to adjust the rear jet a little to force it down more in the rear, or maybe close pressure to tail to put more pressure in rear jet? Any advice appreciated. Thanks.

@MRGREGSHOWTO 8 дней назад

Howdy partner! Try adjusting the oval float buoy on the back. You can pull it out or push it in to change leveling. Also, make sure that tail pressure is adequate to slowly wag tail but not too strong to whip it. That is adjusted with the silver bolt. Hope this helps!

@JerryCaves-kf7cn 2 месяца назад

Good afternoon, thank you your video. I changed around the tires as in your video but the sweep isn’t doing much? Thoughts

@MRGREGSHOWTO 2 месяца назад

Howdy, partner! If the sweep isn't doing much, I would recommend first inspecting the tail end of the sweep to ensure it still has a cap attached (should have a small hole). If the tail is in good shape, there is a silver bolt on the outside of the Polaris 280 upper housing. You should be able to finger adjust this bolt. Tightening/loosening will allow more or less water to flow from the tail. Good luck and please let us know how it goes!

@JerryCaves-kf7cn 2 месяца назад

Good afternoon

@JerryCaves-kf7cn 2 месяца назад

I guess I should tell you I have the Polaris 280 machine