The Most Powerful OptiPlex Ever

Подписаться 675 тыс.

Просмотров 368 тыс.

50% 1

I built a top of the line OptiPlex gaming sleeper and it turned out awesome.
Thanks Microcenter for sending the motherboard:
New Customers Exclusive - Get a free 240gb SSD at Micro Center: micro.center/94bb37
Motherboard link: ASUS Z690-G ROG Strix Gaming WiFi DDR5 Intel LGA 1700 microATX Motherboard: micro.center/8324ef
Full Specs List:
CPU: Intel i9 12900K
RAM: 64 Gb Of Corsair Dom Plats DDR5 @ 5200Mhz
GPU: Nvidia RTX 3080 Ti
Mobo: Asus Strix Z690M
PSU: 1000w ThermalTake Toughpower G1
SSD: 1Tb Patriot Viper VPN110
Cooler: Noctua NH-U9
Get some AWESOME Dawid merch here: dawiddoesmerch.com
-Here is a link to my Patreon page, it would be awesome if you check it out: / dawiddoestechstuff
Follow me on whichever Social media you don't hate
Discord: / discord
Twitch: / dawiddoestechstuff
Twitch shorts channel: / @dawiddoestwitchstuff1128
RU-vid: / dawiddoestechstuff

Наука

Опубликовано:

14 янв 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1 тыс.

@WayStedYou 2 года назад

Weird OptiFlex, but okay.

@voduz999 2 года назад

This ratio is weird, but okay.

@leftturnsmatter7555 2 года назад

Love that lmfao

@alexmaldonado2804 2 года назад

Damn, nice one

@PingoPiper 2 года назад

😍😍😊😊😖😖

@4xbuu 2 года назад

@@voduz999 L

@OzTalksHW 2 года назад

The internals stink, but man can that seller mod an office PC haha. One of the blessings of these optiplexes was that they supported standard mATX form factors. Great for, and I quote, "Linus-ing the crap out of it" 😄

@losingmyfavoritegame8752 2 года назад

Hey, Oz! :D

@richardbrown8452 2 года назад

love your channel Oz you make great content man gave me the courage to build my own 800 dollar pc lol

@AlcyoneHere 2 года назад

2 Legends

@leafyclass 2 года назад

oz :D

@adil-blue-blood7626 2 года назад

Mr oz we are the budget pc people and Mr Dawid trying to put the hulk and the skin of Justin Bieber

@asandberg6 2 года назад

Placing a 120mm fan where you removed the HDD cage will vastly improve temps.

@MeddyMurphy 2 года назад

i was thinking exactly the same!

@tagesvaterpatrick8780 2 года назад

A nice NFS 12 might suffice 😉

@hellooperator6639 2 года назад

I saw in another video where the front can fit a 140mm fan. Also, there's a small vent on the side panel that might fit a 92mm fan. There's no way to mount it though without either drilling or praying tape will hold it. I wonder what the temps would be with both of them added and what configuration of push and/or pull would be best.

@professorjack2099 2 года назад

@@hellooperator6639 I went the hackjob route and hammered a hole through the front. That sheet metal is some flimsy warpy stuff that will cut you easily. I regret my decisions :( technically the easiest route would be a pcie fan card or a reference cooler gpu

@WanderfalkeAT Год назад

A 120 Watercooler Solution would probably help much more for the boiling CPU!

@Ruisu4 2 года назад

You should make a reverse sleeper build where you put dell parts in an awesome case with cool rgb

@SSJfraz 2 года назад

Or alternatively, you could just buy a Dell "gamer" PC.

@joefish6091 2 года назад

Who pays for the waste of time and resources ? wally world or BB PC

@Ruisu4 2 года назад

What? I just think it would be an intresting video to see how far you can push a dell system with good cooling and to see if he could fit a strange motherboard into a standard case

@DawidDoesTechStuff 2 года назад

That’s already happened. Check out the Alienware video. 😂

@Pekeliini 2 года назад

Would be really interesting to see how temps could be improved with some dremeling the fan grill at the back and dremeling some of the metal away in the front and putting a 120mm fan to push air in.

@EthanH1 2 года назад

@jackthegamer I doubt that would fit. If it did a better cooler would be possible, but Dawid is saying it’s not.

@AnticipatedHedgehog 2 года назад

I was thinking the same thing, get that dremel going and cut some more of the case!

@baroncalamityplus 2 года назад

Agreed. The right fans would make a world of difference for the thermals in that case.

@Ji-oo1tt 2 года назад

@jackthegamer that's the setup i have, although my mobo is stock with a 4790 and 3060

@yorchli3152 2 года назад

There is a video from The Game Bench channel where he shows how to add a 140mm fan to the front, very detailed and informative. It's called Adding some airflow to a dell optiPlex

@cookie7993 2 года назад

I like how micro center is so good that people honestly don’t even need to be sponsored by them to recommend them. They’re just great.

@Majima_Nowhere 2 года назад

It just sucks that they're not more widespread. The nearest one to me is 110 miles away, 2.5 hours + Boston traffic lol

@DaltonTk423 Год назад

Micro Center shines where Fry's Electronics failed. I hope they take over the old Fry's locations on the west coast.

@pandemicneetbux2110 Год назад

@@Majima_Nowhere Came here to say this. In USA it's a more West Coast thing and obviously not everywhere in Europ--hey. What do you Euros do for PCs? Because I seen some funny s&%$ in German. Outrageously priced office PCs, literally dell optiplex tiers for crazy prices I just didn't know if those sites were like, mainstream, or it was some weird slumming experience. When you're new to the area you tend not to know which streets to go down and which ones to avoid, so you tend to find things completely at random that are hidden gems or being knifed and robbed by a GT 450 wearing a "1060" mask.

@thundershadow Год назад

I miss compusa and I miss fry's. There is no micro center here in Nashboonies. And I miss javanco (the old one).

@desktopstu4145 11 месяцев назад

This comment is sponsored by Microcentre

@TheStarkster90 2 года назад

I've had to remove the HDD cage from an OptiPlex before, and it's just easier to remove the side and front panels and drill out the rivets to be honest. No dremeling required.

@davidsnyder2068 2 года назад

Agreed. Titanium bit with high torque to drill out the rivets

@Incommensurabilities 2 года назад

@@davidsnyder2068 I managed it with a cheapo drill that had a worn out battery, so it's totally doable with a basic drill 😅

@DawidDoesTechStuff 2 года назад

I did drill out all the rivets but the the cage was attached to the frame with glue or solder. 😁

@TheStarkster90 2 года назад

@@DawidDoesTechStuff I feel like you might be right. It's been a year since I did my OptiPlex case mod (should do a sleeper build with it to be honest), so you could be right that Dell pulled a Dell. I just feel like I did something that ended up easier than dremeling or going HULK SMASH on it (I don't have a dremel, so that's why I say that. 😂)

@DawidDoesTechStuff 2 года назад

@@TheStarkster90 To be fair, I do default to hulk smashing faster than most people. I wouldn’t be surprised if there was a way to do it more gracefully. 😂 All I can say is I definitely got all the rivets.

@abqalhamairi 2 года назад

I have no idea why your channel is not exploding! You are such an underrated top-notch content creator. I hope people start realizing soon your true worth.

@pandemicneetbux2110 Год назад

I thought it did explode??? Dawid is one of the most well known tech channels isn't he? I think of him as being like just under Jayztwocents, Linus, and HWUB for the tech channels. 863k views is not "underrated" ?

@ahmed-0775 2 года назад

The reason for the high temps is not the cooler itself but the airflow, you habe no fans for intake at all. I would've tried to fit 2 fans in the front to prevent the airflow suffocation.

@kyles8524 2 года назад

i got one of the new hp pavilions gaming computers and it only had an exhaust fan and was causing the gpu to get hot.luckily on those the grill on the side sits right over the gpu and i was able to install a fan that blows air directly at the gpu.

@ahmed-0775 2 года назад

@@kyles8524 wp on that! Most of these Dell prebuilts dont even have intake fans at all

@jamesgodfrey1322 2 года назад

yes look at case you could very easy add in a intake fan or two and I like to see that

@Robemcla 2 года назад

While air flow is definitely an issue, he is using an NH-U9S chromax.black. If he was going to use an air cooler he really should be using an u12s/u12a. That is about the largest you can go with that board.

@taunteratwill1787 2 года назад

Airflow? The side of the case was open! How much airflow do you want? 😃

@surfx4804 2 года назад

Tip: Use tinsnips where you can rather than a dremel. Putting tiny metal dust inside a PC case is not a good idea.

@DawidDoesTechStuff 2 года назад

That’s a good idea. I’ll get a pair of those.

@yourforeignlocal 2 года назад

6:48 The way it lights up is magic

@Obie327 2 года назад

Dawid!, Very nice sleeper pc! I was very excited to see you get this done! I find cramming new parts in pedestrian boxes to be pretty cool. Thanks man for fun build!

@RichieBlaze1 2 года назад

Finally, a proper build that matches the case's aesthetic! 👍

@DeepDownInTheOcean 2 года назад

Bruh, I went and fixed something to drink and as soon as I left a video was posted (11 mins ago for me). TY for the content Dawid!

@sadc3623 2 года назад

BRUH IKR, lol.

@InfectedChris 2 года назад

That stripping around 4 minutes in really had the best music to get any techie into the mood.

@wilsondavenport6939 2 года назад

i did a sleeper build in the same case and i used jumper cables for bread bords on the power connector to make it work

@jamescartez9969 2 года назад

I love dawids vids, it so like Christmas came early when he uploads often.

@Pratik_Sanyal 2 года назад

It's like writing the same age-old answer but adding bulletins to get extra marks for good presentation, but then the home tutor added some points by himself and made it outstanding.

@busterscrugs 2 года назад

Sleeper PC's are the move. This has to be the most gangster OptiPlex on the planet.

@CESAR_H_ARIAS 2 года назад

Dawid Build expectations at the start of the video: High! Expectations after seen his splicing, soldering finishing skills: way downtown!!! After the specs reveal after looking at that CPU cooler I said: really? Lol, after temps imo it need some Dremel, a noctua industrial 3000 rpm fan placed into that front and a better cooler

@timalexander746 2 года назад

Love the video as always Dawid! Do a quick mod and get a 120 / 140 fan on the front of the case pulling some more air in to aid cooling! As we would say in the uk "jobs a goodin" :)

@2LoudTech 2 года назад

Super dope idea. I am surprised that the internals did not reach the temperature of the sun.

@AnnaDoes 2 года назад

Haha same here!

@perrymcclusky4695 2 года назад

The computer didn't explode and Dawid didn't die = successful video. Thanks for doing this OptiPlex gaming sleeper build. I appreciate it.

@samhicks7430 2 года назад

This was the best. Love the sleeper. The hard drive cage removal was fantastic!

@reikisano4542 2 года назад

Oh man, I wonder how would the temperature be if Dawid added a couple of intake fans and swapped out the crappy stock fan in the back with a good one. That should alleviate the temperature a bit, even before replacing the Noctua cooler for a stronger one.

@zeroturn7091 Год назад

I thought about replacing my rear fan, but I read somewhere that you want to build up positive pressure. A exhaust fan may bring the cabinet to equilibrium or negative pressure.

@Rpground 2 года назад

Honestly, just the case alone is sexy enough that I'd consider buying it. Wish you could just get the case by itself.

@Arthur_Lake 2 года назад

your youtube has helped me so much in the passed in what to buy in pre builds and honestly any computer things things you for the content

@eviljohn 2 года назад

It looks a 120mm AIO would fit in there. It might fix that CPU heat problem. Love the build, great job!

@zalankhan5743 2 года назад

Or just using a 12600k or 12700k

@JobeStroud 2 года назад

Those are 80MM fans.

@eviljohn 2 года назад

@@JobeStroud i mean, he still has the dremel.

@budgetbiker7 2 года назад

Air coolers are actually better in most situations than an AIO, mostly when it comes to sustained thermals

@ggesdsdsdsd 2 года назад

@@JobeStroud 92mm

@NoobSniper 2 года назад

Awesome upgrade! I would be curious to know how much of a difference 2 fans in the front as intake would make, temperature wise 🤔

@gavinendsley 2 года назад

2 won't fit, but you can fit 1 140mm.

@NightMotorcyclist 2 года назад

Them putting a Micro Center 10 minutes (by public transit, less when driving) away from me was a blessing and a curse. I find myself going there one to two times a month just to pick up stuff or browse any new releases.

@BelowAmbient 2 года назад

LOVE THIS VIDEO... its been decades since I've seen anyone bust out a drill and dremel for any pc mod... KEEP IT UP!!

@fazlymawlarafi9331 2 года назад

Next, do it with a SFF Optiplex and fit a RTX A2000 GPU into it, the only low-profile, slot-powered card from Nvidia that has RT cores in it.

@cytro 2 года назад

yes please

@gavinendsley 2 года назад

I would love to see this in an SFF case.

@oldguy9051 2 года назад

You have to check first if the Optiplex MB support RTX-cards which not all do.

@Stelio_Contos 2 года назад

I did the same thing, but I actually put a 120mm intake fan in the front to keep temps down. The temps are in the 60/70's °C.

@paulschottke948 2 года назад

I've just bought this same Optiplex case and will do this myself because this is awsome. Thanks for showing how to do it and giving this great Idea.

@scrumpadooshes Год назад

how did it come along?

@robot5663 2 года назад

I love that this case got pimped, I really hope you are keeping this bad boy like this too

@joechen7887 2 года назад

5:37 the fact that Dawid mounted the heatsink upside down, is just a face palm moment. But then I remember the whole computer was a facepalm worthy piece of junk beforehand and I'm ok with the heatsink.

@airhumidifier1235 2 года назад

the top m.2 slot on that motherboard is in the opposite direction from what is usually seen on motherboards, the ssd heatsink was preinstalled so its not his fault but yeah still hillarious

@thephoenixking1086 2 года назад

I mean he may have done it as a joke hah

@DawidDoesTechStuff 2 года назад

Have you never used an M.2 slot before? 😅

@thephoenixking1086 2 года назад

@@DawidDoesTechStuff I never thought about that, I thought it may have been a joke hah

@DawidDoesTechStuff 2 года назад

@@thephoenixking1086 Haha!! To be fair, I didn’t even realize it was upside down.

@dabmaster2311 2 года назад

love the videos dawid keep doing your thing!

@mruczyslaw50 2 года назад

Back in the days when dell parts were actually replacable instead of having one single mobo and power supply model on the planet that would work

@SyntaxTurtle 2 года назад

Those Optiplex mobos and PSUs are proprietary though. They use a smaller (12? 16?) pin power so you need a matched set. Though you can get a new PSU and buy a third party adapter for $15 or so which is what I had to do to put a GTX 1080 into my kid's system.

@mruczyslaw50 2 года назад

@@SyntaxTurtle 1:18 you can see that this mobo has standard 24pin ATX connector

@DonaldMolter 2 года назад

Dawid flexing his muscle by ripping that drive cage out 💪🏻

@AnnaDoes 2 года назад

My man 🤣

@richardirvine2220 2 года назад

What A beast config. That was fun to watch. Thanks man.

@bigdog6286 2 года назад

That looked like a lot of fun. I would love a setup like that.

@increasewill4254 2 года назад

Investing in crypto now should be in every wise individuals list, in some months time you'll be ecstatic with the decision you made today.

@eviefrye5804 2 года назад

Yeah, My first investment with Mr Luis Victor earned me profit of over $25,530 US dollars, and ever since then he has been delivering

@daisy.p8160 2 года назад

He has really made a good name for himself

@user-yd8jq5dy2w 2 года назад

Luis Victor has been managing my trade for months and I keep making profits every week, I made $9,130 last week

@zadockqr.....427 2 года назад

😷😷†𝟏𝟐𝟑𝟏𝟕𝟒𝟓𝟓𝟑𝟖𝟓

@zadockqr.....427 2 года назад

His availability is on WhatsApp👍

@zzzlamont 2 года назад

Dawid your content has improve substantially good job!

@ZachDxn 2 года назад

These chassis were actually fantastic for an everyday work PC. I kinda miss these.

@neto9217 2 года назад

I mean honestly, for basic gaming. These OptiPlex machines kick butt. I still recommend these to people starting out because it is the whole package for around $200-300. I definitely wouldn't label these as gaming PC's but they are definitely capable of gaming.

@losingmyfavoritegame8752 2 года назад

The internals look great! I love the look of this sleeper. :-)

@techjgboy8878 2 года назад

Awsome video and love the build you did how you did it

@blackviper7797 2 года назад

"Why are you so strong?!" Optiplex hard drive cage: My powers are beyond your comprehension.

@thealandude9146 2 года назад

I friggin love seeing sleeper builds

@ericcardinal4788 2 года назад

I really like that case for some reason. I can not explain why I like that case so much. Great content as usual

@hellooperator6639 2 года назад

I'm going to be doing the exact same thing and was wondering if that Noctua CPU cooler would fit in an Optiplex case. I couldn't find any examples, so I gave up looking. Then I stumbled on this video and you've confirmed that it does. Thanks! I'll never be tired of seeing Dell and HP office computers being recycled into gaming PCs.

@GeeboatsCollects 2 года назад

"Linusing the crap of it" was by far the best line in this video! Systems pretty fun too

@jkorotkiewicz 2 года назад

Please try the Igor's lab "lga1700 washer mod" onto the motherboard and check if temperatures will drop a bit!

@Doggo_Norse 2 года назад

These videos are so addictive, keep up the great work man 👍👍

@BikersandBags 2 года назад

I absolutely love this PC! New subscriber and really enjoying the videos!

@indridcold2840 2 года назад

This is the _David Carradine_ of Dell Optiplex, looks ok on the outside but is secretly in constant danger of fatally choking itself out.

@802Garage 2 года назад

Dawid, feel free to ignore me if you know all of this, but you could get some depinning tools or get created with home solutions. Basically, you could remove each pin from that Dell connector and hook them up one by one like a lot of cases come with individual breakout pins. You could also either buy the individual pin sleeves or just put some heat shrink tubing around them for protection from accidentally touching. Really fun build!

@ShawnJonesHellion 2 года назад

I grew up in the 90s going into microcenter unable to afford anything but feeling like a kid in a candy store. When people ask about where I'm from I forget to tell them we created the world's best technology store.

@DavidAshwell 2 года назад

When you rip the front drive cage out, you can fit a 140 in the front - I let mine site at a slight angle upward with Noctua rubber feet.

@jurajkovac1770 2 года назад

Dawid should put 1 or 2 fans behind front panel ventilation and dremel out the metal mesh to further improve airflow, that could be topic for next video

@georgerr335 2 года назад

been a sub since around 120k... really good to see you going after half mill. akwats knew from the first day I found out your channel you would get half a mill subs soon... I bet by 2023 you will be around 800k going for the mill.

@d.r.1402 2 года назад

I have the same case, you can get the aftermarket power supply out, but it takes a bit of finagling with the side case lock. You have to slightly unclamp it from the slide rail at an angle carefully so you don't break the plastic.

@TheDodgeAZ 2 года назад

My fav cpu channel, I love doing stuff like this too

@matthewmcsparren7534 2 года назад

I want to see a whole series on the romancing of Dawid and Micro Center!

@shannonrhoads7099 Год назад

This upgrade reminds me of the running gag on some Star Trek sites referring to a complete rebuild of the starship around the "NCC" nameplate as a 'minor refit'.

@MrMorphix13 2 года назад

I saw one of these things in the wild, when a customer brought one in for servicing. Its SSD was dead less than a week after purchase. People were definitely loving the mirror and RGB lights, at least

@HappyBeezerStudios 2 года назад

personally I'd prefer having a status display instead of the mirror. they used to sell them combined with fan controllers.

@justinbouchard 2 года назад

That cooler blows my mind. I run my 4790 at around 115 watts, peaks at 128 ish sometimes with a liquid freezer 280 on it. My temps are about mid 70's peak with. You running at 140 watts and 80-90 celsius freaking amazing to me!!!!!!!!!!!!!!

@christopherbickell3258 2 года назад

Literally 2 words into the video - “trouser-tightening”. Classic Dawid.

@cadenbarnfather1434 2 года назад

im kinda amazed that they havent discontinued the optiplex line anyway with all of the older models on the market

@93Volvo240 2 года назад

Temp solution: Stick a blowy-matron fan in the front sucking air in, and a second one in the back sucking air out. Then attach 2 systems to the wings of a Boeing 747. Low-temps and cheap air-travel. In all seriousness, this was an awesome video, great job!

@MulkyrJohnny 2 года назад

Love these videos, I noticed the power buttons doesn’t light up anymore after you wired it up with the other connected but no worries doesn’t affect performance

@zeroturn7091 Год назад

The next two wires were the PWR LED.

@BuzzKiller23 2 года назад

I'm genuinely excited to see a new high end mATX board.

@DawidDoesTechStuff 2 года назад

I know right!

@JPPRODUCTIONSYT 2 года назад

I always love watching these videos. It's entertaining and I always come back for new uploads or watch old ones. Keep it up! Think this is my first comment on the channel. Ive been subbed for about a year now.

@ozpin8329 2 года назад

As someoe who enjoys building computers in old Lenovo and Optiplex cases, I desperately want this.

@DeathlyPrice 2 года назад

Sure, the Optiplex is Old enough to not have Proprietary Motherboard Disease, but it's also NEW enough to not suffer from having Dell's BTX Motherboard Disease from the mid 00's.

@Wigglythegreat2 2 года назад

That cpu cooler is quite good despite it's size. It saved many a small case from thermal throttling the CPU. I used one myself in an Omen case and that was the best cooler that would fit. It made a huge difference over the stock cooler. It was able to cool an i7 in a cramped case, but asking for it to cool a new i9 is asking a bit too much of it. I do love your ambitious approach though. 😃

@dannyburke6624 2 года назад

I modded one with an M-ATX RYZEN BUILD for my daughter last year! She loves it! I did cut out the front grill to fit a 140mm fan and it runs a lot cooler.

@zetectic7968 2 года назад

Very good and entertaining: excellent use of gloves and a soldering iron. I challenge you Dawid, to water cool that CPU 😁

@somecuntxxx 2 года назад

My optiplex 3020 is a work of art for its era. It has a GTX 760 windforce OC, a 120mm blue fan underneath the faceplate, an extra face plate on the top covering a 80 mm fan, a blue 120mm fan on the side, a card reader, upgraded RAM, 3 HDDs, and and 850 watt power supply that was just replaced. While having a Time capsule build is nice and all, I would advise using a modern power supply. One from 2013 is probably going to get shot sometime soon.

@OptimalMayhem 2 года назад

This is a pretty awesome computer now, lol. Unique in absolute absurdity but legitimately badass. I love it. Would love an update with a better CPU cooler to unlock its full potential. I'm sure you often tear these down to reuse parts for future content but this thing is daily driver worthy :p

@TheMike90a 2 года назад

I love sleeper builds! More please!

@JoeeeBoyPlays 2 года назад

Dang, I want to buy myself that sleeper. It looks really nice for working on spreadsheets.

@swirrllfolfsky9803 2 года назад

Quick tip to lower temps a bit: mount a noctua redux fan to the front of the case. It'll lower temps by a few degrees. I did that with my Dell dimension case, and it really helped. The dimension case layout is almost identical to the optiplex, just a hair smaller

@mattparker9726 2 года назад

4:23 OH man! That looks like magic smoke city if I've ever seen it!

@Daves-Corner 2 года назад

Its always a good day when Dawid puts out a new video!

@grantg98 2 года назад

With only the one 80 mm exhaust fan with all that hot hardware, it's going to be a huge oven for those components.

@janekk916 2 года назад

please more videos like this, its awesome!

@poorsap1598 2 года назад

You can add a fan where you took out the HD cage for some more fresh air. Also you can drill holes below the graphics in the bottom of the case and maybe put taller rubber feet on it to allow gpu to get a bit more fresh air.

@MikeRota 2 года назад

You should revisit this PC one more time, where you install something that helps bring down the temps of your sleeper!

@RegazozoGaming 2 года назад

The Dell Optiplex intake solution! 4 1/2 inch hole saw, the area where you removed hard drive cage, an Electronics cabinet ventilation grill, and a 120 mm fan. Drill the big hole, 4 screw holes, and install! Before everything became overpriced and impossible to get I made several Dell Minitower budget gaming PC's for my friends kids or for them in some cases and this was my solution for cooling. Now a 4790 & GTX 1060 vs this top end system.. its not gonna fix it 100% but its a fun & easy Mod, would make a great video, and will give at least some extra cooling!

@shaneeslick 2 года назад

G'day Dawid, This is the crazy sorta thing I do 😂, upgrading components in old cases & forcing airflow to keep them cool enough, Like one case where I cut a hole in the Case Floor adding a 120mm Fan sucking air in so I didn't ruin the Closed off HP Front Panel

@komnishura 2 года назад

Nice and balanced build. Really like the idea to buy a prebuilt to get hold of a. Sweet computer case.

@joefish6091 2 года назад

100 bucks on ebay, fully functoonal. perfect for grandma , or play or upgrade.

@Flytrap 2 года назад

I have never seen someone strip wires with scissors before! Life is a learning experience...

@cloak679 2 года назад

your vids never failed to entertain me, i would love to see you trying to find a wish prebuilt, so you will be done finding all your prebuilt sites

@MisterResistance101 2 года назад

Man I would seriously love to buy that OptiPlex wow.

@iireflexii7756 2 года назад

The way you word your sentences is amazing! :)

@AlphaMachina 2 года назад

God, I wish I had that system. Even the ironic case is beautiful. I'd mod the front of that case, cut out that interior mesh just below the drive bays leaving enough metal on all 4 sides (but leave the front exterior mesh like it is) to mount an AIO in the front (the biggest that would fit, possibly a 240, or maybe even a 280 if possible) intaking air into the system, then put a Noctua fan in for exhaust. I'd also mount a couple of 2.5" 6TB SSD's in there at raid 0 for installed games.

@BigDrewski1000 2 года назад

Should put an RGB fan or two where the drive bay was and crank up all the fan speeds to max. Will be loud as all hell, but should help with temps some.