The No-Nonsense Way to Sharpen a Card Scraper

Подписаться 284 тыс.

Просмотров 55 тыс.

50% 1

This is the easiest and most foolproof way to sharpen a card scraper that I've found yet.
INEXPENSIVE SHARPENING SYSTEM - lddy.no/z4ys
CARD SCRAPERS, BURNISHERS & MORE - lddy.no/1f0kw
HOW TO KEEP FROM BURNING YOUR THUMBS WHILE USING A CARD SCRAPER:
• The Simple Hack That's...
GET YOUR OWN DEWALT MITER SAW DUST COLLECTION BOOT HERE:
inspirewoodcraft.com/products...
DW716 ZERO CLEARANCE DUST COLLECTION - inspirewoodcraft.com/collecti...
DWS716 ZERO CLEARANCE DUST COLLECTION - inspirewoodcraft.com/collecti...
OR VISIT US ON ETSY
www.etsy.com/shop/InspireWood...
PATREON: / inspirewoodcraft
EMAIL: inspirewoodcraft@gmail.com
WEBSITE: www.inspirewoodcraft.com
INSTAGRAM: / inspirewoodcraft
Looking for DOUBLE SIDED PAPER TAPE, DISCOUNTED HIGH-QUALITY PEC COMBINATION SQUARES and overall great savings ALL THE TIME? Shop where I shop! lddy.no/go67
YOU CAN SAVE 10% ON STARBOND CA GLUES AND ACCELERATOR!
Use the code “INSPIRE10” at checkout! www.starbond.com
SAVE 10% ON THE BEST CIRCLE CUTTING JIGS HERE!
jaspertools.com/discount/INSPIRE
SAVE 10% ON OLIGHT FLASHLIGHTS, TACTICAL LIGHTS AND HEADLAMPS!
Use the code "INSPIRE10" at checkout! www.olightstore.com/?streamer...
BANGGOOD WOODWORKING TOOLS: www.banggood.com/marketing-Wo...
MY HAND TOOLS, POWER TOOLS, CAMERA GEAR AND MORE:
www.amazon.com/shop/inspirewo...
SOME OTHER VIDEOS YOU MIGHT BE INTERESTED IN:
HOW TO MAKE THIN STRIPS ON THE TABLE SAW - • Throw Out Your Thin-Ri...
CHECK OUT MY TAPER SLED VIDEO HERE - • Unlimited Possibilitie...
If you appreciate this content and would like to help give back FREE OF CHARGE, simply give this video a “thumbs up”, leave a positive comment, subscribe to Inspire Woodcraft’s RU-vid channel and SHARE THIS VIDEO with someone who you think would enjoy it. Some of the links that we’ve provided above are affiliate links. That means that when you make purchases through those links, we earn a small commission of the sale at no additional cost to you. While we do use affiliate links where we can, we only endorse products or services that we believe in. That commission is a big part of our income, which also goes back into making more videos, so by using the links you help support what we do and for that we are very grateful.

Хобби

Опубликовано:

26 фев 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 97

@jcsrst Год назад

Excellent and easy alternative to some methods I've seen! You can stick a rubberized fridge magnet where your thumbs go when using the scraper and it will keep them from getting warm as the scraper heats up during use😊

@naomarik 3 месяца назад

Thank you so much, got my scraper to make some good shavings. All the other videos make this a daunting task. As a beginner I don't have all the materials and time to make a jig just to sharpen this tool.

@dennismarjamaa6805 Год назад

I also always had dust when using my scraper. Tried your method today and was excited to see actual shavings! Thanks for your no nonsense videos!

@orellinvvardengra6775 10 месяцев назад

I'll have too give this a go myself as I also only get dust.

@bobdriggers6111 Год назад

Well, the mule got skinned as one would say! As if not more important, it's not just what you see but, what you can hear.There is a noticeable change in sound after a few passes. Bravo!

@terryt2910 Год назад

Sweet demo. I've never sharpened mine, because I was clueless on how to go about it. You've answered all my current questions. Thank you.

@Dragon_With_Matches Год назад

I appreciate the simplicity of your approach. I just got a set of scrapers and watched a bunch of how to videos, they made all kinds of jigs and whatnot. You got the same results. Thanks!

@johnford7847 Год назад

Using the carbide router bit was very clever. And your method is elegantly simple. Thank you.

@jsmxwll Год назад

"now it's startin' to get hot" I have a scar from not realizing just how hot a card scraper can get. I was in Jr High shop class and had the scraper in a holder and then touched it. At first I thought I cut myself, but nope. Apparently you can get a card scraper hot enough to burn yourself pretty good. Just mentioning because I don't see it mentioned very often.

@InspireWoodcraft Год назад

@jsmxwll Dang! Well thanks for mentioning it here. That's crazy.

@jgo5707 Год назад

Similar if you sharpen a chisel on a dry medium like sandpaper, with no water, it gets quite hot if you don't pay attention and take your time

@kentrichardson9070 Год назад

I was shown the magic of a card scraper back in the 80s at a cabinet shop I worked at by my boss. Basically anything steel at hand can work. A nail set works well even a screwdriver. I now own a Veritas card sharpener sharpener with adjustable angle settings but don’t recommend it. I also do all four edges. Always wanted to make a holder....good project for you to come up with Jody. Cheers

@rickmasten6409 Год назад

You always have the best videos on RU-vid the most influential never miss a video. I always get a dah why didn't I think of that.give yourself a big pat on the back and keep on giving thank you so much!

@shermantank Год назад

Jodee killing it as usual. Covered a topic clearly in 6 min that most videos cant do in 10-20min. You're the best!

@daifeichu Год назад

I saw that kit that's been out lately going for about $100. I looked at it and it's one of those things where I can use what's already in my shop, like that diamond stone to prep it. I've got one of those and also carbide bits. Thanks for showing this.

@BruceAUlrich Год назад

Very clear way to do this. Thanks for sharing!

@plainnpretty Год назад

I love simple which usually works out to be the best. Thanks

@jamesbarisitz4794 Год назад

Gotta love that simple process. Thanks for making it easy man.

@stevestamper3509 Год назад

Simple. I love it. Thank You

@MalenyFieldsForever Год назад

Probably the best video I've seen on this topic👍

@chriskeeble Год назад

Had no idea. Love this. Going to try it. Thanks muchly!

@sui24fu Год назад

I love the videos you do. Keep up the good work.

@williamdanaher2574 Год назад

Simple elegance. Nice job.

@mikedodsonlabview Год назад

What a great method of sharpening. Great video. Thanks.

@skippylippy547 Год назад

This works great! Thanks.

@user-zc1zy7uz5t 8 месяцев назад

Just adding my thanks for the great tip. I hadn't gotten past the saw dust stage with my "scraper" but now there is hope! Thanks man!

@escapefelicity2913 6 месяцев назад

well done! as ever, the simplest solution is usually the best

@scotttiffany9453 Год назад

Scott Tiffany 11:39 It’s so awesome to watch your videos that are short and right to the point with no fluff! You are a natural instructor.

@tharemyhopkins5873 Год назад

Fantastic demo! One thing that helped me keep track of which edge I had done / which was sharp or dull etc., was to write 1, 2... on each edge and that helped me keep track of which edge to go back to if I set it down during work. Also having a 2nd card to switch to when one gets hot was a nice bump in productivity.

@etcher6841 Год назад

Another great one, thanks!

@danielcox9202 Год назад

I have been watching your channel for a while, and I must say your methods of finding different, simple ways to do things is very refreshing. Thank you for all the many hints you have provided. it is much appreciated.

@etcher6841 10 месяцев назад

This guy rocks

@bhartissimo Год назад

Thanks for this video. I've never successfully sharpened my scarpers cos I don't have a burnisher. Now I can try it with a router bit. Thanks!

@michaelsaxman 4 месяца назад

Been using your method, and came up with a trick to make it easier. When you go to square up edges, after you've flattened the sides, put the card lengthwise (short sides to the rubber) in an irwin pistol grip clamp and crank it down till the card is flexed into a crescent moon shape. Then the card will sit perfectly perpendicular to the stone and be easy to hold.

@DrShaggy Год назад

thanks for the inspiring video!

@gholmes182 Год назад

Excellent advice! Thanks.

@pmdinaz Год назад

Thanks for the head's up! These are on my list of 'nice extras' to have around.

@hassanal-mosawi4235 Год назад

Thanks for sharing that!

@deemdoubleu 19 дней назад

Awesome stuff

@fredparsons5134 Год назад

Nice tips Jody. I like the tip where you just slip the scraper under the burnished to put the small angle on it. Simple technique but effective.

@Mark--Todd 8 месяцев назад

I now use this method to sharpen the spine of my bushcraft knife. I use the spine to get fine shavings and also to strike sparks on the ferro rod. Works perfectly so thanks for posting.

@michaeldean2053 Год назад

Great video

@glencrandall7051 Год назад

Well, by the time I got here the subject has been pretty well covered. With the process I agree. An excellent idea to use a carbide bit. But I will have to check my screwdrivers too. Thank you for sharing. Have a great day and stay safe.🙂🙂

@acerjuglans383 Год назад

He held a carbide bit in his hands....but he used the steel shank to do the burnishing. No one would actually wreck a router bit doing this.

@mayberrywj Год назад

Excellent video, thanks.....:)

@Erik_The_Viking Год назад

I'm definitely trying this out! Thanks - I'm tired of getting sawdust with my scrapers.

@toeknee276 Год назад

Completely spot on sir, most tooling steel is good enough for burnishing. New subscriber here and really enjoying your content 👍

@coreygrua3271 Год назад

Inspired, AGAIN.

@jgo5707 Год назад

Wow that's much less daunting than any other example I've seen yet, beautiful!

@willhoward9190 Год назад

great job. Keep it up

@MixingGBP Год назад

A big fist bump to you, my man!👊🏼 I could not figure this out for years! I believe I was messing up the last step to fold over the hook. And I didn’t get the concept to find the correct angle when you are using it. Now I can get full shavings as thin as .004”!

@user-io9ln1or7c Месяц назад

Thank you Sir

@viracocha03 Год назад

im a completely new woodworker, about 3 months into the craft. I know I want to work with hand tools and I made a card scraper from an old saw I had and got it working in about 30 seconds after this video, i used a drill bit instead but it did the trick.

@hansonlife9465 9 дней назад

Might have to try this on my griddle spatula. Like em sharp! 🔪

@Jimbo878 Год назад

I've used the shank of a HSS 13mm (half inch) twist drill bit as a burnisher for a few years

@BobBlarneystone Год назад

And the next vid could be an adjustable holder for the scraper that flexes the scraper and is easy on the hands

@dpmeyer4867 Год назад

thanks

@liquidrockaquatics3900 3 месяца назад

I have never owned or tried a scraper, but now I need to get one. I know I have a broken carbide router bit or I probably will soon..

@makermark67 Год назад

I've seen folks use screwdrivers as the burnisher before too. Never tried it, but seemed to work. Great tip, Jodee. Thanks!

@jellyartist Год назад

I use a hardened screwdriver that had a ruined tip, so ground that end off and use its shaft as a burnisher. It’s perfect for the job and has a handle so easy to hold. A few swipes every now and again will re-establish the burr edge.

@alans1816 Год назад

That used to be the standard recommendation. A few decades ago I tried all the screwdrivers in the shop, and only one of them worked well. (It was chromed and small diameter.) These days scrapers tend to be harder steel than in the past. Carbide is better as a burnisher.

@jellyartist Год назад

@@alans1816 Indeed. I’ve always done things on the cheap so got my scrapers from a house clearance and the screwdriver from a skip. All work a treat though. It’s good to recycle. Must turn an old saw into some scrapers!

@wittworks Год назад

I need to make a video on this.

@InspireWoodcraft Год назад

@Wittworks I mean, you could. But I don’t know, man. The topic is pretty flooded. 😂

@raymondbunkofske4702 Год назад

Just a note, the shaft of the router bit is high speed steel, not carbide. You can burnish with many things as long as they’re harder than the scraper. I have some scrapers that are hard enough to score the shaft of a drill or router bit so be careful on those first few passes and check whatever you’re burnishing with.

@woodturnermark8529 7 месяцев назад

the one piece spiral router bit he used was solid carbide.

@bhboyle Год назад

Great video Jody but you used the router bit on the wrong side. At least thats what I saw. I love your videos. Your style and presentation is just about the best of the wood working channels I follow.

@InspireWoodcraft Год назад

@Brian Boyle Thanks! What do you mean "the wrong side" though?

@bhboyle Год назад

You rotated the scraper 180 and burnished the opposite side that you prepared on the stone.

@InspireWoodcraft Год назад

@Brian Boyle Ha! I think I see what you mean. It's the correct side. It does kind of look like I flipped it though. Maybe I need to slow down!

@bhboyle Год назад

@@InspireWoodcraft Sorry man. I didn't mean to be a pain. Please don't think I am trying to give you a hard time. I truly love your work. Cheers.

@BartonMaxwell Год назад

@@bhboyle Nah, I thought the same thing. Even typed out a comment before slowing the play speed. Like a magician, making us think he did something he didn't.

@kencoleman7762 Год назад

Nicely done and I appreciate it. I don’t recall hearing much about card scrapers until fairly recently and now I find card scraper videos much more common.

@glencrandall7051 Год назад

It's probably the You Tube algorithm. Once you watch something You Tube starts showing more of the same to you.🙂🙂

@DonsWoodies Год назад

Ha! I have half a dozen carbide rods (scrap from my machinist days). Never even occurred to me to use a carbide router bit. Duh! Have to remember this when someone tells me they don't own a burnisher. "Didn't you say you have a router? - well I have news for you. :-)

@samhoschar5794 Год назад

I have a set of DMF scraper's and they are really heavy duty there so thick you can hardly bend them I have tried to sharpen them with some luck I think they are just to heavy duty to work properly I can get a great burr on it but I can't get very big shaving how thick is your's. I will be getting a not so thick one. Thank you again for your informative videos

@nefariousyawn Год назад

I think it's weird that they sell kits and burnishers to sharpen scrapers. I think I saw it in an old Paul Sellers video where he used the shaft of a screwdriver.

@InspireWoodcraft Год назад

@Tucker Southard I definitely love to have a decent burnisher at some point, but I don't know about the screwdriver. Whatever you burnish with has to be harder than the scraper. But whatever works for Paul, works for Paul!

@dwightl5863 Год назад

I use a screwdriver as well. Just has to be harder then the scraper.

@nefariousyawn Год назад

@@dwightl5863 Yeah, I have one specific screwdriver in my collection that I know is hard enough, because I didn't have any carbide at the time.

@nefariousyawn Год назад

@@InspireWoodcraft I don't even know if it was Paul Sellers now. I just went through his scrapper vids that I can find, and he uses a dedicated burnisher. Nonetheless, I did find a screwdriver shaft in my collection that was hard enough to roll a burr on my scrapper, but this was before I had any carbide in my collection.

@MCsCreations Год назад

Thanks for the tutorial, dude! 😊 Stay safe there with your family! 🖖😊

@superpuppy7854 Год назад

👍

@tedrzz Год назад

Thanks for this!! I just got my first card scraper and will sharpen it using your method!! Question - what type of finish should I expect from a card scraper? I'm familiar with finishes from sand paper - approximately what grit should I expect? Just so I know what to look for? Thank you!

@batchrocketproject4720 10 месяцев назад

Card scrapers are a type of plane, cutting slivers of wood parallel to the grain while papers grind away the surface. The scraper should produce a hard silky-smooth surface, different from anything achievable by sanding.

@tedrzz 10 месяцев назад

@@batchrocketproject4720 thank you!!

@dwightl5863 Год назад

Good video. Now a challenge: How to sharpen curved scrapers?

@jellyartist Год назад

Essentially the same way but obviously flatting the edge at first takes a lot more time and care especially on tight curves where you need to use fine files or papers to get rid of any machine marks because you can’t run them on a stone. Methods may vary!

@LaurentBourdier Год назад

I will try this very clear and simple way. Only thing is I cut myself with a drill bit once while using it in a very clever way, it wasn’t nice, and that’s not happening again. I’ll use a proper burnisher, or make one.

@woodworkingandepoxy643 9 месяцев назад

Just wanted to add if anyone doesn't have a carbide router bit a hss drill bit will do it too

@mrhobbs5713 Год назад

I save magnetic cards to stick to the scraper to keep from burning my thumbs

@BigBrotherIsTooBig Год назад

First😁

@debandmike3380 Год назад

honerite

@teejay3510 Год назад

Next: how to stop the damn things from rusting 😩 P.S. for those people like me who can't hold something square freehand to save their life just cut a block of wood and square it up then hold the scraper against it when you do your first step to flatten and prep the smallest edge. It will take a good long time for that wood block to wear out, don't need to get fancy and use something like torrefied wood if you don't want to.