THE SECRET BEHIND THE JEEP Wrangler ROCK KRAWLER SUSPENSION Lift Kit 

Any 4 door lift is a 2 door lift as well. Just keep in mind 2.5 would be 3.5, 3.5 would be 4.5 ext. Also some long arm kits would probably vary, but as far as not making lift kits for 2 doors, i have yet to see that. Pretty much every company out there makes 2 door kits.

Seconded. To that comment, the basic lifts are the same however some of them correct factory rake on the 4 door so you may need a 1/2" spacer on the rear. To level it out. But definitely no shortage of lifts on the market and as far as best goes. I would look into Synergy their stuff is bulletproof.

@@chefdanielb I hear RK is using the same springs for the JL as the JK with a spacer. This is what I'd heard so I cancelled my RK order and went with Teraflex.

I know too many people who have had failure after failure with RK. They have never been on my list of things to put on my JL. I usually support all the brands on this channel except this one. I also had really subpar results with Metalcloak. So far Synergy has been great.

RK hater know it alls aka Metalcloak fanboys/girls...nothing wrong with brand loyalty but not at the expense of smearing the next brand.

JeepΦJeep no reason to smear anyone. The simple truth works and focusing on your own stuff works well.

@@dwizl7213 I wouldn't say I'm a hater, but I am a believer of proven facts. I enjoy my metalcloak products because I dont worry about joints going bad(no maintenance, flex is great, and joints dont squeak when they get dirty) the arms dont rust after a winter, and it's based simply on what I've been around and seen. Had my experiences been better with RK I'd use their parts.

Just like everything else, as you go bigger and badder, the more maintenance is always required in general. Like when we upgraded to nitrogen shocks, the 6paks required maintenance. But it’s worth the added benefit. When you upgrade to beadlocks, those also require maintenance (a lot of people don’t know this, but they do). But the benefit is worth it. Same with this long arm kit, the benefits are worth the required maintenance. It all just depends on what your goal is for your personal rig and what you are willing to do to achieve and maintain that goal. 😊😊

Jaime Conde Jr RK is using new joints now and they also now powercoat everything in house. The issues before were when the outsourced the powder coating. The new joints won’t rust or corrode but yes these concerns are for good reason as they did use to have problems

Nick Ing dazed & confused Hahahaha I do exactly the same thing, better safe than sorry

@@Future-Preps35 Yep happened to me only get caught once, it felt like someone had chucked pepper in my eye's, as you said a couple of day's of much discomfort, and nothing can be done about it you just have to ride it out ugh, yep only once was once to many.

Been there, Done that. Once, I thought I still had my mask on my head. Did the head shake and started my bead. It was a short burn. ;)

Mikie Peters. Amen brother.

💯

Merry Xmas !

David whisman it’s all made to order so the time Varies

Typically it takes 1-3 days to fulfill the order (since everything is printed and made to order) and Domestic shipping usually take 3-5 business days.

YES, that is so cool and shows he's not in it for just the money, but he's proud of the product.

Sky Tiger we are slowly taking the over

Won’t lie, this Toyota loyalist would convert to a Jeep guy if I ever find a JK/JL 2Door with a Hemi/LS for right price.

Mike Hoffman 5° outside

Vincent Gallagher haha

Dave Susek thanks!

K. G. You must of done something right

CHEAP JEEPER helps that I’m up before the sunrises every day 😎👍

I should have waited until the end of the video before I asked that... DOH!

? I didn't know the Fins were into these also! How are these set-ups in the snow?

They have new joints now. My Metalcloak joints lasted about a year or so and needed replacement but I use them harder then most

I have the tie rod it’s massive. So reassuring when I’m beating the JK to know that’s holding my stuff together under there!

Hahaha. We were filming 5 other install videos plus we did about 15 E3offroad.com videos all at the same time so he had to do one on his own

@@LiteBrite Uh huh, suuuure. Poor Kevin. He's really gonna miss that kidney.

🤣🤣🤣🤣

Canadian Shield Expedition yup we will!

Merry Christmas to you as well!!

Merry Christmas:) ya it’s definitely neat to see the progress

55andBoulder Hannam imovie all shot on iPhone

@@boughtnotbuiltoffroad7784 Ok thanks. i am new to this.

fender thanks buddy!

AllenTaskForce there will be lots of videos coming out don’t worry.

We definitely will! We’ll be starting the build at the beginning of 2020! Rules are being written now by a legal team to make sure everything is done the right way (and to include our Canadian friends in the giveaway as well)! We’ll give everyone updates as we have them!! 😊🤙

Scott Hall I did. They just were the new technology

@@boughtnotbuiltoffroad7784 Most Cited Violations of 2019 1. Fall Protection - General Requirements (1926.501) 2. Hazard Communication (1910.1200) 3. Scaffolding - General Requirements (1926.451) 4. Control of Hazardous Energy - Lockout/Tagout (1910.147) 5. Respiratory Protection (1910.134) 6. Ladders (1926.1053) 7. Powered Industrial Trucks (1910.178) 8. Fall Protection - Training Requirements (1926.503) 9. Machine Guarding- General Requirement (1910.212) 10. Personal Protective and Lifesaving Equipment - Eye and Face Protection (1926.102)

I am from Alberta as well... Cheers

rufus brest is it not easy to order from our website? For real want to know

We have orders from Canada on almost a daily basis. Were you having a specific issue?