No video :(

They Said Building A Lexus SC-F Was IMPOSSIBLE...And They Could Be RIGHT (Good News and BAD NEWS)

Подписаться 427 тыс.

Просмотров 189 тыс.

50% 1

Thanks to Keeps for sponsoring this video! Head to keeps.com/wren... to learn more and get 50% off your first order of hair loss treatment.
------------------------------------------------------------------------------------------
Subscribe to Wrench Every Day ► bit.ly/2D4iSp8
Buy our NEW shirts and merch!►bit.ly/wrenchmerch
Follow us on Instagram ► / wrencheveryday
------------------------------------------------------------------------------------------
Today, Tavarish fits the new Lexus IS-F engine onto the SC300 subframe, it fits, sort of. As it turns out, this will be much harder than we once though.
------------------------------------------------------------------------------------------
Questions? Comments? Business inquiries? Email us at iwrencheveryday@gmail.com
------------------------------------------------------------------------------------------
Twitter ► / wrencheveryday
Instagram ► / wrencheveryday
Tavarish on Social:
Instagram ► / therealtavarish
Facebook ► / asktavarish
Twitter ► / therealtavarish
Jared on Social:
Instagram ► / jaredpink
Twitter ► / thejaredpink

Опубликовано:

24 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 477

@michaelreynolds1904 3 года назад

Freddy's phone pinging away the entire episode, totally ignoring Jareds texts of "don't take anything apart until I get there".

@budaroddy 3 года назад

😂

@andylewis7360 3 года назад

I was just imagining Jared waking up in a cold sweat after having a nightmare about walking into Freddy’s workshop to find everything strewn across that impractical floor! LOL

@esqueue 3 года назад

What's with the bots?

@Tropicarna 3 года назад

every time his phone went off I looked at my phone thinking it was mine pinging drove me nuts lol

@lacai527 3 года назад

Freddy fixing, makes Jared do double work! :D

@deaks25 3 года назад

MVP of the Episode: The wooden pallet that the 2JZ was sitting on; that thing was lifted and twisted all over the place but stayed strong. Good job Wooden Pallet, good job my friend.

@whollymindless 3 года назад

"This worked better in my head..." the story of my life.

@dubiousf00d 3 года назад

Yeah, I felt that.

@pleite567 3 года назад

Yeah same here, everything i do and say worked better in my head🤪

@Cosmy88 3 года назад

This video should be titled "tavarish talks while triying to drop an engine on his foot for 21 minutes"

@mbsnyderc 3 года назад

That was never going to happen.

@Cosmy88 3 года назад

@@mbsnyderc you must be fun at parties

@SuncoastCreate 3 года назад

Got those steel-toed deck shoes one

@johnkilo3 3 года назад

The second he said Jared wasn't around you should expect no real progress was going to happen.

@andylewis7360 3 года назад

@@johnkilo3 HAHAHAHA!! Yup!

@misfits010 3 года назад

I like where this project is going...we'll see how long they go at it before it is forgotten like the 300zx, the honda limo, lotus.....etc..

@dsembr 3 года назад

And that's just this channel. There's still a manual SL55 that has yet to be finished.

@jake_of_the_jungle9840 3 года назад

I miss the lotus

@benvolio28 3 года назад

I thought Jared mentioned that they need to get those projects to Florida. If you watch the lotus vids they were from a while ago, the lounge wasn’t even done when they were being filmed. So, maybe some more lotus content soon.

@stevemulcahy5014 3 года назад

"We're gonna have to weld or fabricate a bracket" Nik from Bad Obsession Motorsport just felt a happy tingle.

@Mrflash222006 3 года назад

Al from the skid factory likes a good mount too

@sparky4878 3 года назад

So long as he uses CAD and breaks out the level that “makes the noise”

@philgrimsey3637 3 года назад

@@sparky4878 *bbbeeeeeeeeeeepppp*

@1203fild 3 года назад

Rich is going to get the funk out too!

@syedrehanfida 3 года назад

10:43 That Supra back end!

@wayneneher6362 3 года назад

Yes, Freddy, a hospital trip is NOT to be encouraged.

@jan-hendrikbussmann4644 3 года назад

Balancing an engine on a pallet with a car jack in freakin' slippers? I'm gonna need some therapy hours after watching that. I love this project, just watch your feet, please...

@paulnellany3770 3 года назад

You need Chris to loan you Oscar for a week.

@802Garage 3 года назад

This is the kind of project I love, but all the little issues you may be about to encounter are also giving me anxiety, hahaha.

@brianspenst1374 3 года назад

That anxiety is what the Tavarish content is all about.

@jdm_obsession 3 года назад

Let’s just hope the next video isn’t “I bought a new car” and doesn’t come back to this

@Tclans 3 года назад

Yaaaasss das is goood

@MafiaboysWorld 3 года назад

Hurry up Aaron and get back onto the V10 Subaru you lazy bastard. 😛 (Saying this knowing I have Crustida to finish myself. 🤣)

@802Garage 3 года назад

@@MafiaboysWorld Hahaha you right. 😬 I have been making progress! 😁

@jonathanhagerty7174 3 года назад

Jared would be proud, at the same time it sounds like he is texting you frantically during the whole video.

@richardbrewsterrick6984 3 года назад

IT was nice that Jerid went and helped Deric VGG

@jordancapps9521 3 года назад

Hopefully Derick drops in on them next time he is in FL.

@joealex65 3 года назад

I'm sure nobody said it was impossible, that tittle is just a Tavarish special! 😂😂

@LiveFreeOrDieDH 3 года назад

Probably because no one ever thought to do it. Everyone is always like, "Put an LS in that!" As if no other V8 engines exist.

@EyeMWing 3 года назад

Hot tip for lifting engines onto/off of things that don't fit with the engine hoist... Use an arm on the two-post lift to lift the engine. The hoist is really only suited for from-the-top install/removal. If you have the option to lift it with ANYTHING else, do it.

@samiraperi467 3 года назад

"There's a lot of divorce happening in the shop today" Hire a lawyer.

@coreysmith2196 3 года назад

Who ain't getting a divorce nowadays, I know I am🤷🏾‍♂️

@tripprogers4814 3 года назад

and now we know this divorce was real.. We haven't seen them together in any videos lately, the Cartrek vid was old. Sadly, They may be on the splits..

@yellowbird8690 3 года назад

Can't you get that Bendpak, that gave you all those lifts, to get you an overhead gantry crane? It would make it so much easier to swing those engines around.

@ChainBaker 3 года назад

Come on 300K!!! :)

@Dualecosse 3 года назад

Flip the mounts from side to side (it moves them backwards) and flip them upside down and see how much that helps

@dtc2044 3 года назад

Try using the passanger mount on the driver side and driver side mount on the passenger side. Should bolt right up and could move the bolt hole back enough to use the stock mount because they seem tapered forward. Worth the try seeing you have them

@mattpovah5952 3 года назад

Super appropriate shop footwear for moving around heavy engines Freddie. :)

@ThatRoddy 3 года назад

15:00 why not remove the pallet and use a trolley jack to maneuver the subframe

@Moparornocar74 3 года назад

Would using the subframe or mounts for an SC400 be helpful here? I don't actually know how different if at all the 1JZ cars are from the 1UZ cars

@ReijoRitari 3 года назад

That effect around 5:15 made me thing that video was corrupted during upload

@Moonsauc3 3 года назад

Or recovered

@decaharms 3 года назад

It was actually some sort of weird digital artifact written into the file by the GoPro. No idea why, and no way to fix it in post :) -Duane the Editor

@charlie1832 3 года назад

@@decaharms need some Duane the editor message breaks during the videos those are always funny

@decaharms 3 года назад

Thanks Plumbaman! I normally try to stay out of it as much as I can unless there’s a glaring need to jump in and add my two-cents worth. I guess I’m sort of the Wizard of Oz guy who moves the levers and buttons behind the scenes and only comes out of hiding when needed :). But I DO have a very tiny cameo coming up in the next video...

@charlie1832 3 года назад

@@decaharms cool. Looking forward to the next one

@jamespreston2667 3 года назад

Have you finished any project or just good at starting new ones? Can you finish 1 and let us know what you do with it afterwards?

@Foxlawl 3 года назад

"I love projects that don't cost a lot of money" I have a feeling by the end of this, it's going to have cost more than my new car. >.

@szczerzo 3 года назад

Jared doing Jared things - listening to Jaredsence alerting him all the time that Freddie did something he shouldn't have.

@regal105 3 года назад

Jared up playing with a guy and a chevelle

@StanleyKubick1 3 года назад

*sense

@CR7659 3 года назад

Maybe give some thought to a shop crane. Doesn't have to be fancy, just a beam on a post that swings and a winch or chainfall hung on it. Take a look at Puddin's Fab Shop for an example in his garage.

@andylewis7360 3 года назад

Jared needs to teach Freddy the difference between “Questionable choices” and “Foolish Decisions"

@hamskyxxx 3 года назад

Oscar from B is build would really come in handy for this build

@justintorres9231 3 года назад

17:59 Flip the mount! see if it works

@allan80supra 3 года назад

bolt up the SC trans cross member to the IS auto, lift the engine into place make sure the engine/bellhousing join is in the right place then offer up the subframe and build the mounts otherwise you will be making a transmission mount for no reason

@NET-POSITIVE 3 года назад

You should look into a Bridgeport end mill. If you try and weld the cast aluminum it will break quickly.

@aabney615 2 года назад

When is this coming back?? I was really excited to see this project go on and be done and then you guys just stopped it!! If u have to buy it from tavarish so it can actually be finished and not forgotten!!

@saradomin88 3 года назад

10:43 That Supra

@mizinoinovermyhead.7523 3 года назад

Don't mod the subframe, at least not to mount the engine (IE don't change the mounting location on the subframe) It'll be easier and more reliable to build mounts off thoseengine brackets (IE replace the engine brackets with fabricated ones). You'll be able to use measurements to get the engine centered and you can push the engine up and back into the engine bay to clear the rearward part of the subframe, or you can push it back and down while trimming the subframe to make it sit under the hood and in the firewall better.

@TheOpius123 3 года назад

17:55 FLIP THE MOUNT should be lined up with the hole!

@AdamIsUrqed 3 года назад

You and Jared should write out and post a step-by-step (if successful) should anyone attempt this in the future. Parts list, fabrication details, tools necessary, etc.

@GuyneeseBullDog 3 года назад

take the mounts and flip them upside down and then switch sides.... it looks like it would fit

@MatthewTyreeKS 3 года назад

What about getting the Jedi welding master Tony to weld it up?! We haven't seen him in awhile!!

@Tron1731 3 года назад

Flip the mounts from left side of motor to right side of motor if that won't work make a new mount out of cardboard to mock it up . Then you will have a prototype you can copy .

@300DBenz 3 года назад

If the motor mount brackets have the same bolt pattern on both sides, try swapping them left to right, it might move the holes close enough together to use the stock ISF mounts on that subframe (without all that pesky fabrication you’re planning on)

@outthere2 3 года назад

Toyota implemented a cost savings of about 10 cents per vehicle to just reuse the lift hooks. They get conveyed from one section of the production line to the other and never leave the plant. If you have an old engine, simply use those hooks on the newer engine. you just need to know where the bolts go. Usually a spare hole on the front and the back of the engine. Just a tidbit of info you didn't need to know. You're Welcome...

@Oscar-jt8tn 3 года назад

Anyone suggested using the mounts for the 1UZ-FE, the SC300 also came with a 4L V8 from the factory.

@oliabid-price4517 3 года назад

Make steel mounting brackets to bolt onto the block.

@benit0yo 3 года назад

if the motor mounts on the ISF motor are mirrored, swap the motor mounts to the other side to see if it helps. Works on a bunch of engines, curious to see if it works on this one.

@uncommonlogic1698 3 года назад

If often working alone, get a "rolling A frame" with an electric winch/hoist

@kaibaumgartner7721 3 года назад

9:24 Choose your own adventure....sounds like a great spinoff blooper channel :)

@glennarnold3970 3 года назад

freddy swap the engine mount brackets from left to right then they will line up with your rubber mounts as the offset will be in reverse cheers from down under

@gideonsujit3931 3 года назад

I knew there was a video coming out today when I saw hoovies new video a while ago. I don't know if anyone else has noticed Freddy's videos always come out a few hours after Tyler's 😂😂😂😂

@joshrepik 3 года назад

I feel a lot of the guys I watch upload on the same days

@mikekozi-lester3887 7 месяцев назад

Hi Tarvarish nice video 📹 and workmanship the car is nice also !!

@MichaelBEarl 3 года назад

Did you try just flipping the engine mounts over? At 18:23, it looks pretty close. it's hard to tell if the 4 bolt holes are set in a full rectangular pattern, but if they are the mount looks pretty close to alignment with the hole in the subframe.

@rhiantaylor3446 3 года назад

Love the ventilated shorts Freddie, also the Honda Beat.

@adamoldham9542 3 года назад

I would focus on engine transmission placement in the car then install the k member and make the modification. Then it will be easier to get the angle correct on the mount you’re building.

@Tclans 3 года назад

So stoked for this build tbh. And with each episode the tension rises. Great seeing you work on it alone, lovin’ the labor and sketch. Reminds me of the Gallardo build. 💪🏼

@devlinmcdaniel2610 3 года назад

its gonna be really hard to get to that drain plug if the oil pan is sitting right there in the subframe

@toriyansa 3 года назад

A BLACK SUPRA IN THE BACKGROUND 😱😱😱

@TheKiltedYaksman1 3 года назад

Should've put some of the money that went to pretty floors toward a nice pneumatic engine hoist.

@kwiebusch 3 года назад

Is it possible to flip the mount over, add a puck and drill a new hole in the mount? It looks like it almost would line up?

@gcntech9071 3 года назад

The fact you do things by yourself that others need 2-3 people is really great! Nice to have my coffee watching these stuff! What about the black Supra behind? Did I miss anything?

@Catloose 3 года назад

From what I can see for the “mount problem” maybe you can switch the mounts plate from the engine from left to right turning them around so the bolt hole would move back enough to get the mount where it should. I see it’s a 4 bolt rectangle that maybe can be switch around. 😂

@matthood2878 3 года назад

I have never seen an old exhaust manifold come off so easy without breaking bolts or anything else that was amazing👍🏻

@gavinplunkett977 3 года назад

I have always enjoyed watching your videos. Looking at you offering up the engine to the new sub frame, I think if you turn the mounts on the engine up side down and bolt tem to the enging like that it may line up with the mount holes in the new subframe.

@purplestache1208 3 года назад

Why not just put the left side mount on the right side and right side mount on the left side if possible to see if it’ll fix the offset

@bdmr_isf 3 года назад

lmao the good old cracked manifold problem on the ISF Engine...

@Mike-29979 3 года назад

Tavarish; try removing the engine mount, turn it upside-down and see what the clearance is. Might get you closer.....

@M5JamesE39 3 года назад

I remember when the shop was clean and organized...now it looks like my GF's makeup room!!!

@StanleyKubick1 3 года назад

sure. she from canada?

@christopherhess8523 3 года назад

I'll be dipped! Love that Jared helped out Derek

@eanhuston2426 3 года назад

What about making a mid engine chassis, and put the 5.7 tundra motor?

@ajw828 3 года назад

So close to 300k! When is the Maxima content coming?

@janalexandro6655 3 года назад

Tavarish should do a detailed garage update with absolutely all his cars.

@palanthis 3 года назад

Female Car RU-vidrs - Hair and makeup done. Cute outfit. Nails done for closeup shots. Tavarish - Eff it. Dirty sweatpants. I love it!

@the5th2000 3 года назад

More complicated, but what about finding an electric pump to drive the hydraulic power steering system? like in the R53 mini for example. Would certainly give you better steering feel and feedback

@OEMPlus 3 года назад

i really enjoyed my sc300. they're built like tanks and classy as hell.

@ArturBrzozowski444 3 года назад

I'm excited for this project too Remember Honda Rhousey?

@dughuff8825 3 года назад

11:23 Loving the protective footwear...🥺. Great project though - just make sure you have feet able to operate throttle and clutch by the time it's done! 😃

@PcItalian 3 года назад

Love how at 7:25 you spray and immediately use and impact to remove a bolt. Why bother spraying if you don't let it sit?!

@terrybaptist795 3 года назад

Freddy is like screw what Jared says im gonna put work in.

@joachimsandgaard 3 года назад

Flip those engine mounts upside down - bolt and a hockey puck!

@STimedic1 3 года назад

Why not fabricate a tubular front subframe that allows placing the IS-F motor and steering into the SC?

@Tarkov. 3 года назад

5:02 oh no freddy what is you doin 💀

@DiegoR 3 года назад

You have to say "We are the #1 Ambassadors of wrenching Every day and #1 Ambassadors on making questionable decisions" 😆👌.....

@aragorn4 3 года назад

You should look at getting one or even two lift tables. They'll help you lift and lower engines etc from underneath the car.

@turbointegra82 3 года назад

Who's black MK4 supra is that in the background?

@moeblack1566 3 года назад

Why not just get an sc400 engine sub frame with mounts then use the rack and pinion of the sc300 but make sure the sc400 frame will fit on the sc300 so you don’t do too much work

@garya6647 3 года назад

Great episode, really liked lots of wrenching stuff

@leonardmorel5111 3 года назад

Flip the mounts over and drill new holes

@mcbobly 3 года назад

Definitely a case of do as I say not as I do. Almost everything looked pretty sketchy lol. Looking around that shop it seems as though it’s becoming very cluttered and quite messy. Might need to take a weekend and clean it up some and give yourself some clean space to work in.