This Tiny Antenna Is Next Level Convenience For Your RadioMaster Boxer!

Подписаться 52 тыс.

Просмотров 10 тыс.

50% 1

If you are annoyed by having to remove and install your @RadioMasterRC Boxer antenna every time you go fly then this tiny antenna may be just what you need. Watch to see what kind of range you can expect with a flush-mounted antenna on your Boxer.
Print your own antenna mount: www.printables.com/model/3832...
Get your own Boxer here: newbeedrone.com/collections/a...
Flywoo Firefly: www.getfpv.com/flywoo-firefly...
Exway Atlas Electric Skateboard: www.shareasale.com/m-pr.cfm?
Just for giggles here is the video description ChatGPT wrote for me lol.
"Introducing the ultimate convenience upgrade for your RadioMaster Boxer - the tiny antenna that packs a powerful punch! As a radio enthusiast, I've tried numerous mods to enhance my Boxer's performance, and this antenna is hands down my favorite. It's a game-changer that takes your radio experience to the next level.
Gone are the days of cumbersome, unwieldy antennas that get in the way of your flying or racing adventures. This tiny antenna is sleek, lightweight, and unobtrusive, making it a perfect fit for your Boxer. It's designed to deliver top-notch signal strength and range, ensuring you stay connected without any signal dropouts, even in challenging environments.
Installation is a breeze, requiring minimal effort and no technical expertise. The compact size of the antenna makes it a breeze to mount, and it's compatible with both the stock and custom antenna mounts for the Boxer. Once installed, you'll notice an immediate improvement in your radio's performance, with enhanced reception and crystal-clear audio.
But what truly sets this antenna apart is its unmatched convenience. Its small form factor means you can easily carry your Boxer around without worrying about the antenna getting in the way or snagging on obstacles. It's perfect for on-the-go adventures, whether you're flying or racing, and it adds that extra level of convenience that every radio enthusiast craves.
Whether you're a seasoned pilot or a beginner just starting out, this tiny antenna is a must-have mod for your RadioMaster Boxer. It's reliable, easy to install, and delivers outstanding performance, making it my go-to choice for enhancing my radio experience. Upgrade your Boxer with this next level convenience and take your radio game to new heights!"
HDZero Freestyle VTX: newbeedrone.com/collections/a...
HDZero 90hz Cam: newbeedrone.com/collections/a...
Radiomaster AG01 Black: newbeedrone.com/products/radi...
AG01 Color Options: newbeedrone.com/products/radi...
Get your own Boxer here: newbeedrone.com/collections/a...
Get the best battery for your Boxer: www.radiomasterrc.com/product... Battery
TBS Source One: www.getfpv.com/?cmid=eHZ3Y2tB...
Mamba Stack: www.getfpv.com/diatone-mamba-...
Newbeedrone Flow Motors get 8 for $100 newbeedrone.com/products/newb...
#Radiomaster #Boxer #fpv #elrs

Опубликовано:

7 апр 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@BOTGRINDER Год назад

Thats pretty slick

@GhostRyderFPV Год назад

Well, that's why we test, right? Now to iterate, and do it all over again! Thanks for sharing, Stingy! (puts Zorro back together, puts ELRS receiver antenna back into donor plane, waits for next test lol)

@rcvg69420 Год назад

I just use the stock antenna, fits fine in the case that the Boxer came with which packs down plenty small for me.

@sixtofive Год назад

Interesting results! If it does that well on 25mw I'd have to imagine you'll run out of video range before control link with the power turned up.

@MCsCreations Год назад

Pretty interesting results indeed, Kevin! It turned out better than I expected! 😯 Stay safe there with your family! 🖖😊

@Kamila_q Год назад

It’s always good to see you:-)

@anthonygrec0 Год назад

Love to see the innovation though I guess I throw caution to the wind every day since I have never taken my antenna off. 😆

@CapnBry Год назад

I'm experimenting right along with you it seems. I tried a sleeved dipole run out to the back of the JR module bay so it wouldn't be attenuated by the internal electronics. It worked great but when I sit down to race, The antenna was basically between my legs and really killed the signal. I also tried something like this video except on an extendable bit to pull it out when I used it. That worked well but I broke it within a couple days. It would be nice to have something maybe like the left switch, except with 60-70mm of travel-- push to unlock the antenna and it pops out fully, push again to lock it back into the body for transport.

@manski209 Год назад

Exway has come a long way, great boards. I have two diy eboards that i built with air filled 6" wheels and my son and i ride all the time. Great video.

@jamesmason7124 3 месяца назад

I would just use the stock antenna and for long range use the elrs 900 mhz module, at least i will when I save enough money to buy the Radiomaster Boxer Max edition and the battery

@johanakerblad339 Год назад

Many thanks for your test results! Based on your testing it confirms that having antenna inside is enough for my flying. I took the inside of the original antenna and been flying my foamplanes but due to our vinter I have not yet measured distance yet. I never fly further than 250m and in my test flying very high I have never seen any problem within visible range for 0,8m planes.

@JaydenLawson Год назад

Nice test, thanks mate

@JustKeepLivingFPV 8 месяцев назад

Im about to push my stick antenna down like the other guy did.

@DavidOwensuk Год назад

Hi Stingy, great video. I’ve stuck with the Mambo… with both Tracer and Crossfire… Ps love the skateboard

@ninjamonkeyfpv8855 Год назад

I've had great luck with my stock tx16s with IRC Ghost module.. I fly FrSky and Ghost.. I've been curious about ELRS thanks for the test..

@ICE_MAN_GAMING Год назад

Great Content

@baggszilla Год назад

Thanks Stingy!

@MystikSquash Год назад

I’ll stick with my mambo for now. But one day I might be going this direction as well.

@SirCrashaLot Год назад

yep, been using qtee the same way albeit horizontally. putting it vertical makes a lot of sense actually.

@stingersswarm Год назад

Yeah I prefer vertical to keep the nulls below and directly above myself.

@Atlas_FPV Год назад

I must be missing something because I dont see how it makes any sense, the antenna on the quad is horizontal and for the majority of the time you will be flying level, so having it vertical means for most of the flight you are cross polarised.

@stingersswarm Год назад

@@Atlas_FPV there is less loss of the signal from cross polarization than from aligning two nulls. Also I do lots of acro so the antenna is always moving. Additionally I run diversity with both vertical and horizontally mounted antennas.

@JochenSchurich Год назад

Interesting results! But I get different results with a HM-EP2 RX (ceramic antenna) and with a HM-EP1. Here are a few measurements with the HM-EP1 at a defined distance at the same point with the same antenna orientation. The Boxer was pointing in the direction of the RX: Internal Antenna Mod: 25mW -104dBm LQ:88 100mW -99dBm LQ:88 250mW -96dBm LQ:98 Original External Antenna: 25mW - 102dBm LQ:96 100mW -98dBm LQ:92 250mW -92dBm LQ:98 Then I've tested with a HM ES24TX Pro transmitter (using my old Taranis X9D+) and got quite comparable values. But what does that mean? Is my measuring wrong? I should probably do the measurements again with a copter in flight to see how it actually behaves?

@SiNFPVGUAM Год назад

I'm still enjoying my tango2

@NathansHVAC 10 месяцев назад

A ceramic patch antenna is the way to go. They are slightly bigger than a GPS antenna and double stick right on the top.

@MnPaul1 Год назад

You have to figure out how to copy the dual internal omnidirection antennas they use on the Paladin FL-18. I get 3000ft. easy on 100mw. That little bump on the bottom of the radio works fantastic. It should work the same for ELRS as they use the same hardware.

@Maceyee1 11 месяцев назад

last time you didnt have a ceramic antenna!? i think taking off an antenna just so you can put a whole module on the back is cool but not necessary?

@RCRitterFPV Год назад

that's a huge drop... I want to swap it out, I hate removing my antennas. i was going to try internal... but since the range was cut in half I dunno... Tango is still my primary... so I really don't care about range on my boxer. just use it on whoops, but would like to use it a backup. hate modules more that taking off antennas.

@jumpstartfpv Год назад

That's surprisingly short range for ELRS. Makes me wonder if something was wrong with the quad or the tx.

@stingersswarm Год назад

Yes limited to 25mw. With a ceramic antenna mounted too close to everything.

@klavifon Год назад

What was your packet rate? I saw 11:100 in osd, so that must be 1000hz if I’m not mistaken? That and 25mw limit and ceramic antenna won’t go very far…

@stingersswarm Год назад

@@klavifon that is the point. Same settings as with stock antenna. It is a way to test the failure point. If I ran 1w 50hz it would be a helluva walk to recover it after fail safe.

@NolanGerald Год назад

@@klavifon If you cranked up the power, your quad would run out of battery before coming close to the radios range limit. Fixed wing guys are hitting 20-40km no problem.

@adamvictor9124 Год назад

Seems like a lot of hassle for a dinky antenna you can take off in 5 seconds if it is bothering you

@slamonfpv Год назад

🤘🔥🔥🤘

@Dwight_K_Schrute Год назад

Yo let me get that

@stingersswarm Год назад

I’ve got a box for you.

@Dwight_K_Schrute Год назад

🤓

@mxracingunlimitedltd7784 Год назад

What goggles or OSD are you using? Is this not Betaflight or is this a custom skin OSD overlay or something like that? Cool video! How do you like the Elrs vs the Crossfire stuff in general? I have a Frsky Q X7 for using the frsky stuff and drones with xm+ RX's for pretty cheap. However they've went up a little in price recently plus no telemetry on TX but works on OSD which is really all i care about.. However the XF NANO RX is now almost the same price and that has a lot more features.. I recently picked up a TBS Tango 2 a few months back, and now that i've gotten used to it, i like the design and i like how its not too nig or heavy when its really not needed and i can almost reach buttons quicker on this smaller layout. Plus its easy to transport and take out and just ready to use quickly, plus new theyre not even too expensive, especially for the quality and what youre getting. It can also accept an add-on module and some of the ones are tiny now. You could potentially have both CRSF & External ELRS on the same TX. With models tied to the specific TX module, so no issues switching between them. Though id get a bigger radio if that was my plan i guess.. I know its only 250mw of CRSF power but that should be fine for me. And if anything i have a NX6, the Q X7, or i can pick up a Radiomaster TX16S with ELRS built-in if i wanted to just switch to ELRS. I fly RC planes and FPV Drones and really the controllers are very similiar, so id really almost have one nice radio for both, like a 4-in-1 Radiomaster TX16s and then get an add-on ELRS OR Crossfire TX module in the JR Bay for the Drone stuff...