Threadlocker Application Tips: Permatex Tech Tip Series

Подписаться 16 тыс.

Просмотров 104 тыс.

50% 1

Curtis Haines, Permatex Associate Innovations Manager, discusses the different types of repairs an auto technician may need to perform, and the different types of Permatex threadlockers and thread sealants that can help complete the job. This video also provides a step-by-step guide to applying threadlocking compounds.
Featured Products:
Surface Prep: www.permatex.com/products/thr...
High Temperature Threadlocker Red: www.permatex.com/products/thr...
High Strength Threadlocker Red: www.permatex.com/products/thr...
Permanent Strength Threadlocker Red: www.permatex.com/products/thr...
Large Diameter Threadlocker Red: www.permatex.com/products/thr...
High Strength Threadlocker Red Gel: www.permatex.com/products/thr...
Medium Strength Threadlocker Blue Gel: www.permatex.com/products/thr...
Please call 1-87PERMATEX (1-877-376-2839) or fax 1-800-432-2067 with any questions or comments.

Авто/Мото

Опубликовано:

30 ноя 2016

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 45

@noureddineelaroussi7680 4 года назад

You answered all my questions, and I thank you sir!

@ilserpente 5 лет назад

I use this on my snowboard binding screws. Works like a charm!

@trellatkins959 6 лет назад

Thanks for the tip. Now I know which one is best for my application 👍✔

@davidostring1289 2 года назад

Good information. Thanks for posting this video.

@wayne8498 4 года назад

Don't forget your helmet and fire suit. Also use caution tape around the work area. If your skills are a little shaky, you might want to use crime scene tape.

@redriver6541 3 года назад

And you need a fire watch for 72 hours....just in case a cosmic ray strikes the thread locker and it bursts into flames......

@KTHKUHNKK 4 года назад

Excellent tutorial

@andrewsrenson1212 6 лет назад

thx guys, highly informative vid 👍

@chriswesley2989 2 года назад

Thanks Curtis

@joselopezsagastizado6160 3 года назад

Very helpful 👍👍

@CarsSimplified 7 лет назад

An engine I am rebuilding has a bolt that goes through a coolant passageway, and the GM recommends using an RTV gasket maker to ensure that this bolt properly seals. I am assuming no threadlocker should be used in addition to that, but I was curious what you guys think.

@altapaltu 7 лет назад

Cars Simplif

@lukaszM46 8 месяцев назад

is there a thread sealant that activates more like glue, so that i can position my brass fittings in the direction required, which a lot of the time means they are not fully tightened? It is said in this video that these thread-lockers are activated when tightened down, so that no air is present (anaerobic), so i assume that's not what i am looking for?

@devilxdude 6 лет назад

yeah I mean... I always wear eye protection when applying thread locker, gimme a break lol

@mohdarif6654 5 лет назад

Is this okay for a loose thread?

@Linoge279 3 года назад

what threadlocker should I use for the metal coolant drain bolt? it keeps leaking, rtv doesn't help

@praphable 2 года назад

Crush Washer with a silicone inner diameter washer works well for my drain bolts

@ericprice5316 6 лет назад

Will the heat from the engine melt the blue threadlocker??

@DeepSouthernTX 6 лет назад

they have threadlockers for high temperature environment

@miguelsalami 4 года назад

Guy's Please Be Extremely Careful not to get this threadlocker in your mouth while applying in a upside down position, It Will cause Lock Jaw! 🤓

@Spahi77 3 года назад

Stealing this one..lol

@a4e69636b Год назад

LOL

@danephillips 5 лет назад

I have abolt on my car that striped .Wonder will this work to keep bolt tight

@mohdarif6654 5 лет назад

Did it work? Me also have thread loose and want to use this?

@danephillips 5 лет назад

I wonder if just using plumber yellow or white tape would work on helping threads grab

@mohdarif6654 5 лет назад

Im worried about the heat in tht bolt..

@danephillips 5 лет назад

Yes did not think of that issue .. Well try this stuff and see . My issue did not become a issue like I thought it was going to be . So just used the plumbers tape No heat issue ither

@mohdarif6654 5 лет назад

Ok thnk you

@BrendonHoppy Год назад

Pedro Sanchez (Spain's présent PM) does exactly the same as Curtis with his hands when he talks😂😂😂😂😂

@briangray7674 2 года назад

The blue thread lock I just bought seems really watery even after I shook it up. It looks nowhere near as thick as the blue in this video.

@ledwysdelgado7304 2 года назад

The one they used here was gel.

@volatex Год назад

same here. runs out of the tube like water, useless.

@artbykeenan 6 лет назад

I USED THE RED ON MY CALIBER BRACKET BOLTS, SHOULD I BE WORRIED ABOUT GETTING THEM OFF AGIN?

@soundhill1 5 лет назад

Is that brake calipers? Should I be suspicious the temperature of a brake caliper might get above the specified allowance for medium strength Threadlocker?

@scientist100 3 года назад

You should know by now. How did it go?

@artbykeenan 3 года назад

@@scientist100 they still good, i have not changed them yet

@heartysteer8752 Год назад

I don't understand the Surface Prep activator. You say at 1:02 that the parts have to be assembled "before the activator cures". What if the parts are difficult to assemble? For the High Temperature Sleeve Retainer it says the part can be heated for assembly, but the activator says max temp 120. It's not making sense. What if I clean the parts with acetone?