Tile plow receives a few repairs and upgrades I think its bullet proof now ? 

I like it! Suggestion, cut a groove with a grinder in the end of the pins so you can see if the hole for the retainer bolts is lined up without having to twist it and look for the hole. Cool project boys.

I've got to agree with Matt on the base. And it WOULD make life easier, at least at the yard as a place to "park" the tile plow when you need the "J" as a dozer,

Try some water pipe insulation on the hoses that run through the plate.

Aaron and Mike are what makes video's fun with giggles and belly laughs...super cool guys...

a base that can be lifted with a set of forks and a lifting eye would be interesting to watch you guys build.

39:09 put a little hair around it 😂 you guys are hilarious! All the positive energy and laughter is awesome! That's how every workplace should be. Cheers dudes🍻

One more idea: taper the tip of each pin a little if there’s enough material. That way the pins can find their own way into all of the holes. I love the beautiful iron work that you have added. The plow looks like a battleship.

To line the pins grind a line vertical on the end so the person putting the pin in knows what way it should be turned

Building a base for this is a great idea!!!! You don't want to leave such a "Pimped Out Plow" in the dirt to rust away. Cheers!!

Take a grinding wheel on your pin and scride a horizontal line across the pin and bracket that way you'll know what your pin alignment should be before you hammer it all the way in.

I like the modifications and added gussets for sure. Should be a beast, and very handy with addition of the guidance, and possible GPS technology. Definitely build a stand!! Make it with a pallet fork design, so it can be moved and loaded without needing the dozer. 👍

Love Saying Aaron again he was dearly missed he always does a very good job at welding. Job well done for the both of you! Is only when Aaron gets back

Good morning all just having my morning coffee with my friends, good place to be!!!

I commented earlier that I believe the structure will bend. I guess to be right? With these and earlier confirmations, it starts to look better. There’s quite a lot of power in that 850, as you can see from the stretching of one mount. However, the truth will only be revealed when you hit the stone at maximum depth. Even worse if the stone is only on one side and it twists the immersion arm. Have you thought about it? I do this kind of work, I design, build, solve problems.

This series has been great to watch. I’ll be watching for the next one with the guidance system install. I don’t believe you could be an engineer, in the R&D department, for a company because your design is to user friendly for the everyday person to do maintenance on it without having to take it apart. Being serious though, a lot of engineers could learn from this series of videos so they could learn how to make products user friendly for maintenance reasons. Great job

Starting from an idea and creating something (with no design team and drawings) is amazing! Being flexible enough in your mind to make the improvements, I call it erasing steel! It is not a negative... an amazing, rare ability.

I think bomb proof would be more a accurate definition. I see a lot tile projects in your future sir. Thanks for the ride along young man, you nailed it as far as I am concerned.

Great video! Fun to see the progress. Take it from someone who has hearing loss, you need to wear hearing protection. You'll be glad as you age!

Thank you for getting back to the project. Been anxiously awaiting these videos

Build an overhead A frame so it can just be lifted and stay there. Faster and simpler, plus can slightly twist it to reinstall.

I think you have your pipe plow designed too the best that it can be now. It’s almost time to see it laying pipe. The laser guidance will be an excellent addition.

When lifting the base unit put a chain fall from hoist hook to pipe on the rear then you can adjust chain fall length to take pressure off pins with the 3 points

We call the upgrade or change a Manufacturer Campaign Change….lol. I can see the Engineering and fabrication hats in full mode. Your upgrade looks really strong and patent worthy…..Awesome video. I envision a Ripper Stand in your future….lol.

A little dirt in my coffee this morning is always a good thing... Nice to catch up and see the upgrades on the plow... 😎👍

Mike, listen to Matt. He knows what he's talking about in regards to the stand. In fact, put him in charge of designing it and constructing it. Get the Captain to help him. With you and MBTS making inspection visits and offering con(de)structive criticism it should make for a very entertaining video.

Nicely done, build came out great. Weld a nut on the flanged end of pins, be able to turn pin line up hole, or thicker flange. Also put a bigger lead in on pins, and tell nym to put on safety glasses when using hammer, one little piece of shrapnel is all it takes, stay safe.

Looks good guys. Matt’s suggestion doesn’t sound bad. It would probably be a lot better than just dropping it on the ground. Really enjoyed watching you guys build this unit. It’s been very interesting. As always thanks for sharing!

I always admire the house and shop being together but the overhead Crain and monorail system makes it even more perfect.

Precision engineering with a pepsi can.. how to moon a gusset (16min 06) .. Genius Mike lol!!! Thanks for the update as always

Yeah for the Base !

Weld a nut on the washer end. Then you can spin it to align. That and a groove , would make it easy.

All I can say it's R&D you got to try to see if it works or not I think the horizontal pin should be better and by looking at the other hole you got lucky it didn't pull all the way through I have seen the shorts can't wait to see a full video of it working.

Build a base foe when not using plough so that it can stand vertical, not lying on the ground.

Thanks , like the video Mike and more brace are welded .

Great project….love the fine tuning process! Yes engineer and build the base!!

Defiantly build a stand. Make it so you can pick it and the plow up with a fork lift or loader and take the plow to the dozer. It will make your life a lot easier.

Always good to improve it before you have a major breakdown

ABSOLUTELY Build a base!

I love watching you guys work in the shop. I learned a lot from you both.

yes to the base!!!!!

Great job on the fine tuning. So enjoyable to watch this project t come together.

Nothing wrong with a rev! It just means you have made it better! Thanks; Mike, Matt & Aaron! Lee

nice upgrade ,it came out nice.with the pins installed maybe weld an alignment markon the hamer side so you can get the retaining bolt to line up with the hole.

Dp that’s First class Research & Development.

Improvement is a good thing nothing wrong with that all you need is the work to make it pay for itself 😃⭐

Great job !!! I LOVE "Gussets"

Base for sure

Great idea NYAM BUILD THAT BASE! and thank you DP for the full length video nice work guys.

Looking forward seeing it in the field and build a base to disconnect it on

Aaron, I know this ain't your video but you are the star. Your welding skills are amazing. I still watch the video you made of your team welding the steam pipes in the top of the power house. Wow!!!!! It is the best. Hey DP, Congrats on the final design.

I like the way the man behind the scene says eyeballs before he starts welding I was holding pieces for a welder once and he never gave me time or warning to close my eyes before he started welding flash Burns hurt real bad

I thought for I'd see the Easter bunny before this build. I once though I was wrong, but I was mistaken. Thanks for a good end to an Aussie Good Friday. If you want to some some good Aussie engineering, check out Cutting Edge Engineering Australia. Just don't let the kiddies or those easily offended watch the outtakes after the credits.

Yippee !! once again " Friday night is comedy night "

YES, build a rack for the Ripper, great Video.

Matt almost has the style as Aaron. A great vedio of skill, character and great personality! Watched every second ❤️❤️

yes I would love to watch any videos

I like Matt’s idea on building a base for the plow!!!

YES a portable base that you can take on and off trailer with the attachment sitting in it.

Build a base 👍👍👍👍you have a beautiful piece of equipment well made and designed and on a low budget now it needs a base to show it off and make dismantling it straightforward 👍👍👍👍👍👍

DP from a strictly non-operator point of view I could see Mr Millenial’s idea of stand of some kind handy down in your yard at the market rather than stabbing into the ground. Great video, nice to MBTS this morning

Matt has the right idea for a stand, will make it easier to move the plough if you are not quite lined up on it. Improvements were needed, had no idea the torsion forces would tear the plate like that so quick. With all the pins pulling across the plough, this should help to spread the force evenly across the entire dozer. Just as well Jason turned up to keep you right with mounting the new bracket too !!!

Build the base, Have Fun!!

I like your videos and I use to operate equipment before I retired and really enjoy your work. Be safe and enjoy your work.

it looks good but I would put a mark on the pin to get the Hohl lined up so you can put in the holding pin in very easy

We weld a 6" length of 1/2" square bar across the end of the pin !- makes it easy to spin the pin with the same hammer used to knock the pin in. No Wrench required and tap for fine tuning

Don't need a base,just two legs on each side,set it on the ground like it is now and put a leg on each side to sturdy it pull pins lower riper drive off.two pinnacle legs.

Hey Mike On the NEW & IMPROVED version if you still have issues with the pins egging the holes out you could do as you said and bush it but a suggestion would be is to put "hardened" bushings in.😉👍👍

the base sounds awesome but a bunch of work to make it stable. iteration is how us tech people move things forward. think it applies every where. nice work

Thanks for the update been waiting

Good to see you both.

You guys crack me up!! Lol 🤣🤣. Nice improvements on the plow!! Thank you for the videos!! 👍 Always a pleasure to see Man Behind The Scene, on the scene!! 💯💪

Yes, a stand is a good idea, otherwise it is just going to fall over on its side. Suggest making the stand so you can pin the plow to it in two places to load it on a truck and strap it down.

Yes a BASE would be nice to have, doing it for my snowblower and dozer blade attachment on my Cub if I can get time this summer.

Great job guys!

Guys like you are one in a million to be able to think outside the box. Great job on designing and fabricating your tile plow.

Mike happy happy Easter to you and your family stay safe and have a great day.

Great job guys! Yes build a stand for it with slots for forks.

Excellent job

Good idea Matt 💡

Mike those are improvements. I call that R. D. that is what good builders do. That till plow is the 👌 have you figured out how mutch till you will have to put in the ground to pay for the plow. I think that you will have the plow payed for in two jobs. That is a successful business owner. Keep up the great videos.

Just a few minor adjustments ,that plough looks brilliant once again well done to you and man behind the scenes cheers

YES.

Great work and thanks for sharing this with us take care

Build the base! :)

You inspire me sooo much, that’s why I started my RU-vid channel!!! 🙌🏼

Great to see The Dynamic duo back together !

"YES" Great video and well done! 🙂

Great job. Grinder a line on the pins to help line the pins up. And great idea for a base for it to sit on.

Got my first experience on a dozer, a Case 550D, no joysticks on that baby. It’s not as easy as you make it look. Mad respect to you, Jerry and all the other operators who do it so well.

Finally added the gusset. Looks marvelous.

love the Tile Plow MK3 the new attachment points are so much nicer and easier to hook up. I like the Idea of a stand for the TP MK3 and Rob Long's idea for a pallet fork design so your loader can move it in the yard or shop, plus make a harness to attach to a excavator to pull it if needed in the field. love the work you all are doing on the TP MK3 I am looking forward to see how the laser equipment works on it. see you all soon.

Hey Mr. DP I think think they call that recall updates it looks good man glad you fix report did break be safe DP I had heard you say anything about the track update how did it perform with the new tracks

Yes build it love seeing yall build stuff...

Mike Aaron and Matt great video, awesome fix! Thanks for sharing! Kevin

New tee request-- “Almost dirt perfect -- EYEBALLS”

Yes build the base!

I vote to build a base. Have good days!

Yep build a base be so cool to watch that looks good

yes, build a base for the tile plow!! Love all of the video's and cannot wait to see it at work for Farmer Chris!

Great video the second time I saw it still good first time one week ago