No video :(

Tips on how to spray Bitty Design Liquid Mask

Подписаться 788

Просмотров 6 тыс.

50% 1

Short video on how I spray Bitty's Liquid Mask
Products I love for painting
Absolute best bang for you buck and amazing airbrush - amzn.to/3WR5235
Once you get better and have a need, this airbrush has a smaller tip to help you get tighter fades - one of the best investments I ever did with painting - amzn.to/3GglqmH
Upgrade to the Iwata HPC-Plus and is just a great looking airbrush for a little more money - amzn.to/3ihk96X
Favorite painters tape - amzn.to/3X97WQD
Favorite Xacto blades - amzn.to/3iiQE4v
Favorite small compressor when space/sound is at a minimum - amzn.to/3G9sUrq
Favorite “big compressor” when space/sound is not an issue - amzn.to/3W18fvX
Quick disconnect for your airbrush, makes changing brushes 10x easier. They make cheaper versions, but don’t last…trust me. I have tried them all and finally paid the little extra for the Iwata disconnects, best ever: amzn.to/3WR4haf
Vinyl stencils for creating dots with your paint - amzn.to/3GHDrMk
Airbrush holder that connects to your table - amzn.to/3icvTHM
Airbrush holder to sit on top of your work space - amzn.to/3VL0z0s

Опубликовано:

4 дек 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@james-rk5sd 9 месяцев назад

The bigger of the 2 knobs on the back of the gun limits how much paint comes out so you dont have to woory about pulling the trigger back too far! Just screw it in for less paint and screw it back out for more paint and the small knob adjusts the size of the spray pattern

@RCDani73 Год назад

Hi Marc, finally you are on RU-vids and I can translate your movies in German ;) TOP!

@LittleshopofFredrik Год назад

Great info! If you thin the Bitty mask, what do you use? Water? Or are there any special thinner?

@MarcMcGurren Год назад

I do not thin bitty as I haven't found a need. I did thin Spraylat, and when I did, I just used water. A little goes a long way. If you are having trouble spraying bitty, your needle/airbrush you are using might be too small. Mine has a 1.2 nozzle

@AndreasKempe 11 месяцев назад

try next to listen better what you hear ... he sayed multiple time he dont thin it at all ...

@MrSneakyGunz Год назад

Are you using just water to clean it up?

@MarcMcGurren Год назад

Yes sir, just water to rinse out with some cleaning brushes. You HAVE to get the inside of the gun clean where the needle goes. Pipe cleaner type brushes are perfect. I found some on Amazon super cheap. After its clean from the sink, I put some water through it to spray out and then place my hand over the nozzle while pulling the trigger to "back fill" it and shoot water back into the gun. This helps get any residue from the LM out of the internals. Hope that helps

@NaughtyGoatFarm 9 месяцев назад

Perhaps I missed it. What size nozzle were you using to spray the mask?

@MarcMcGurren 9 месяцев назад

So sorry for late reply. I believe this is a 1.2 nozzle

@Batranel62 Год назад

Intresting. What about the nozzle dimension?

@MarcMcGurren Год назад

So sorry, just saw this. Mine is 1.2. From what I have heard, .8 is the minimum, but I personally wouldn't go below 1.2

@dustymorris9191 9 месяцев назад

how much pressure are you running?

@MarcMcGurren 9 месяцев назад

30-40 PSI should be just right.

@DeezLouize Год назад

Oh gawd... im screwed. Everybody so far says thicker is better.. well i can barely even see my hand thru it 😢. You think i should just peel it off and start over? This is my first body and there is ALOT ALOT of little designs and effects im doing and i thought thicker would keep it down better so the little intricate pieces didnt pull up together. Would i want to still go thinner coat for what im doing? Pleaseeee help!

@MarcMcGurren Год назад

Morning sir....I would say peel off that layer and start over. Especially if you barely can see through it. When you get any mask too thick, it's a pain to peel, and Bitty especially. It dries a little "firmer" than other liquid mask...which applied correctly is a GREAT thing. Too much, and it makes it difficult. But the other side is, too thin is even worse. If you follow these instructions, you should be good. Best of luck

@DeezLouize Год назад

@Marc McGurren thank you for the reply! After letting it dry completely it actually cleared up alot and I can see right thru it so I think I was just psyching myself out. I also did a test piece with it (the outside of an old body) and it actually cuts out really well. Definitely not as thick as I was thinking it was. Probably just gonna let it dry for a full day cuz people say the longer it dries the snappier the pieces are when cutting them out..? Idk I'm just gathering everybody's tips and hoping for the best. Hey thanks again for the reply, I'm tuned in with you now so I'm sure you'll see me around more often! Have a good day sir.

@DeezLouize Год назад

@Marc McGurren hey Marc.. so I kinda had an idea. Can you tell me if u think this would work or not. So I've been doing a bunch of research on what I should be backing my paint job with so it doesn't get all scratched up and stuff and seems like everybody is kinda going wild with shoe goo and gorilla tape all this heavy ugly stuff. What if I just used the liquid mask as a backing? Do a few extra coats maybe.? It seems pretty durable and it's flexible and sticks really well... yay.. nay.. maybe? Sorry I have no RC buddies and you're literally the only person that has actually responded to me so thought I'd get your opinion 😅

@MarcMcGurren Год назад

@@DeezLouize They are doing it wrong. You can use Krylon or Rustoleum clear coat to do what you want. KEY is 3-4 LIGHT coats. Let a few hours between coats. Or if hot enough outside and let sun dry it. If you can do that, 20-30 min between coats. But has to be light light light. Too thick and it will react to the water based paint and crack it all up. I do this for all nitro and offroad cars.

@MarcMcGurren Год назад

@@DeezLouize www.michaels.com/product/krln-12oz-gloss-crystal-clear-10658920?cm_mmc=PLASearch-_-google-_-MICH_Shopping_US_N_Craft+%26+Hobbies_N_PMAX_LocalOnly_N-_-&Kenshoo_ida=&kpid=go_cmp-18514199957_adg-_ad-__dev-m_ext-_prd-10658920&gbraid=0AAAAADkMxxd07u46xyBo5jgWSeYGlcOao&gclid=CjwKCAjwscGjBhAXEiwAswQqNO3ViSlKgGNkOnPoSyEolAHLYAo9jYAoIrhN4RhX5hAUuRJzsPax1BoCeHAQAvD_BwE

@teamreidy48 Год назад

How many coats do you do total for 1 body

@MarcMcGurren Год назад

Almost always 2 coats and you should be good. Bitty works best when it's not too thick, but not too thin...lol. Following that process should be perfect.

@MikeyB-Rod 7 месяцев назад

How much time between coats?

@MarcMcGurren 7 месяцев назад

Lots of factors on that, as it depends on how thick you sprayed on the ambient temperature, but usually it can take around 5-10 hours to fully dry. The entire body should be translucent pink. If certain spots are opaque and a brighter pink, its not fully cured. Hope that helps

@MikeyB-Rod 7 месяцев назад

@@MarcMcGurren it does and it doesn't haha. I'm getting wildly different opinions on how long between coats. Some say spray the second coat just as the first tacks up. Others say wait 3+ days between coats. Then I have people saying 45-60 minutes. I'm spraying indoors, 70-72 degrees..no humidity

@MarcMcGurren 7 месяцев назад

@@MikeyB-Rod I gotcha - plenty of ways to make it work. I do know Stefano (owner of Bitty Design) recommends it to fully cure before you spray the next one. Sometimes if its about half way cured and I know I won't need the body for a few days, I will go ahead and spray the next coat as I know I won't be touching that body for a bit, that will give it plenty of time to cure. Here is my usual process....spray a coat in the morning. In the event its sunny and nice outside, I will go place the bodies outside to let the sun help cure it. Right now in the winter, can't do that. So I just leave the bodies in my paint room. A box fan does help a little, but not a ton. From there, later that afternoon/evening, I will go spray the 2nd coat. By this time, the body should be 90% dry. Maybe a few spots aren't cured which is no biggie. But I spray that 2nd coat, let dry overnight, and *usually its cured by morning. I have had great success with this way, No matter how you do it, it all works. Just has to be fully cured and a thick enough coat to make it work

@MikeyB-Rod 7 месяцев назад

@@MarcMcGurren I appreciate you getting back to me. Glad to get all the tips I can, I've not sprayed any liquid mask before.

@stevedunn4490 11 месяцев назад

Good video, but needs to be quicker for the amount of content. We want to know how thick to apply, how many Coates and how long between Coates. Then when can we paint.

@MarcMcGurren 11 месяцев назад

Thanks for the feedback. As far as length of video, I totally understand, but I do this for fun and not looking to be youtube famous, just like helping folks when I can....so I just setup my phone, hit record, and then upload. This one is only 8 minutes, so I feel like its not long, goes through the steps, and breaks it down. To answer your questions: thickness - 2-3 medium coats. Put other coats on once the previous coat is fully dry (all parts of liquid mask are translucent and not opaque). Then once the last coat of mask is translucent, you can paint