Тёмный

TIS 600 Manual Portable Appliance Tester 

Test Instrument Solutions
Подписаться 637
Просмотров 1,6 тыс.
50% 1

The TIS 600 is a very simple and easy to use Pat Tester that works from batteries or an AC/DC power adapter, It will also test ALL portable equipment 110V, 230V and 415V (110V and 415V with optional adapters). Built in memory stores 300 results which can be written down later, It's as simple as A,B,C press the button and the tester does the rest. Complete with a padded carrying case, batteries and AC/DC adapter.
Specification:
Features & Benefits
• Stores up to 300 complete test results
• Simple and extremely easy to use
• Battery and mains powered, using 12V DC adapter
• Indicates if the appliance is switched on or not during the test
• 250V and 500V insulation
• Surge protected equipment can be tested
• Test 110V, 230V and 415V (110V and 415V optional adaptors)
• Large LCD Display
• All tests timed out at 5 seconds in line with HSE guidance
• Auto Power Off
• Results held on display to allow them to be noted
• Complete with 12 months calibration certificate
• Indicates results with a Pass / Fail indication
• Indicates results with actual reading AND pass / fail
• Will test equipment that does not conform to EN60950
• Complete with soft, padded carrying case & neck strap
• Clear, precise testing procedures
• Single press of a button from start to finish of test
• Complete with test leads, probes and earth clip
• Auto saving of results
• Tests long extension leads up to 0.5Ω
Tests Carried Out
• Earth Continuity Test upto 0.5Ω
• Insulation test at 250V and 500V
• True reading of leakage at 110V
• True reading of leakage at 230V
• Class I earthed appliances
• Class II double insulated appliances
• IT Test, computer equipment etc
• Tests at 110V, 230V & 415V (with optional adaptors)
• Tests all surge protected equipment
• Tests mains sockets & indicates fault situations
• Earth leakage tests 0-0.75mA, 0-3.50mA
• Tests polarity and indicates fault situations
• IEC cord test
• Extension leads upto 0.5Ω (most other testers will only test upto 0.2Ω)
• Results displayed in actual results AND pass/ fail
• All tests carried out automatically from the press of one button
2 Year Warranty

Наука

Опубликовано:

 

11 май 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 3   
@sergiofernandez3725
@sergiofernandez3725 Год назад
Cracking bit of kit as always from TIS.
@darrenshanks3495
@darrenshanks3495 10 месяцев назад
Does the same apply when your doing a class 1 test. Also, why button C? Button A is class 1 and Button B is class 2. This yester is a bit confusing
@testinstrumentsolutions
@testinstrumentsolutions 10 месяцев назад
Hi Darren it’s A Class 1, B Class 2 and C for cord and extensions, you push the button and it does all the tests for you ?
Далее
How To Use A Multimeter - USING THE FLUKE T5-600 TESTER
14:08
PATMobile PAT testing app overview
11:15
Просмотров 15 тыс.
Старый Дим Димыч вернулся😱
00:16
Что не так с воздухом в Корее?
00:45
Almost EVERYONE is Wasting Money on Dash Cams.
17:32
TIS MFTECO EV
6:14
Просмотров 1,9 тыс.
Introduction to insulation testing using a Megger
19:05
Seaward Apollo 600 PAT Tester
1:35
Просмотров 24 тыс.
How to use the Megger PAT400 PAT Tester Series
14:01
Просмотров 42 тыс.
Seaward PrimeTest 250 PAT Tester - Product Demo
6:40
Kaiweets HT118A Multimeter Review and Testing
41:07
Просмотров 13 тыс.
How to PAT test a fixed appliance - Seaward
5:05
Просмотров 41 тыс.
MSI сделали свой Steam Deck
12:54
Просмотров 36 тыс.