TJ Wrangler - Replacing Clutch Master & Slave Cylinder - Bleeding Clutch Hydraulics - DIY

Подписаться 8 тыс.

Просмотров 22 тыс.

50% 1

Welcome to the channel! LINKS BELOW!
In this video, we cover replacing the clutch master cylinder and slave cylinder on a TJ Wrangler. Then we go over bleeding the system when there is no bleeder on the slave cylinder. It's time consuming... but easier than you'd think.
Merch & Black Diesel Gear
www.notsograndg...
eManual Online - Service Manuals For ALL The Things
shareasale.com...
Want to support the channel?
PayPal - NotSoGrandGarage@gmail.com
or via SuperThanks
#Jeep #Wrangler #Clutch #offroad #TJ #JK #jeeplife #work #mechanic #diy

Опубликовано:

15 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 26

@Conrail50 2 года назад

Thank You for an excellent tutorial! I just finished replacing my clutch master and bleeding of the system and I’m glad I did. Whoever replaced the slave cylinder left the tywrap on the end of the cylinder and it was just floating around at the connecting point. Your video was spot on, thank you again!

@NotSoGrandGarage 2 года назад

Glad it helped. Thanks for watching!

@scottrobertson9788 2 года назад

Super helpful video, thanks for posting! I was a little nervous about attempting this same job but had no trouble, thanks to your instruction, cheers!

@NotSoGrandGarage 2 года назад

Good deal! Glad it was helpful

@mjzawrotny 7 месяцев назад

Thank you!

@NotSoGrandGarage 7 месяцев назад

Thanks for watching

@richardhorton4813 11 месяцев назад

Great video, very helpful, thank you! Question: does that slave cylinder not have a bleed valve on it? I’m just changing the master cylinder and wonder whether I actually need to remove the slave in order to bleed the line through the master reservoir as you did in your video? Thanks in advance!

@NotSoGrandGarage 11 месяцев назад

No bleeder on most of them that I've seen. It's a pain. Lol. Thanks for watching and good luck!

@ronoutwest 5 месяцев назад

Great video. Commercials suck!!!

@NotSoGrandGarage 5 месяцев назад

Yeah I don't have much control over that. Monetized or not, YT still puts ads on everything. Thanks for watching

@coachgeo Год назад

my gears are starting to grind on my OM617 converted TJ. Supposedly the trans is rebuilt. Start with replacing the master/slave??

@NotSoGrandGarage Год назад

I'd say it would be a good place to start. Could try bleeding it first before replacing it.

@chadbair9265 8 месяцев назад

How do u get the slave back on the bellowing once the push rod has Ben extended. Also would air trappein the master cause the clutch to no go in to gear once the engine is running ? It goes in while not running just fine but once I start the truck it won't go in to any of the gears ! Could that be air in the hydrolic syseltem ?

@NotSoGrandGarage 8 месяцев назад

You have to push the rod back down. With that said, yes air in the system will cause the clutch to not release.

@tonitom6799 2 года назад

Thanks for this video

@NotSoGrandGarage 2 года назад

No problem. Hope it helped!

@suiflux2111 2 года назад

question, 01 tj se 2.5l. so my clutch is kind of wonky ever since the other day (about 3 weeks since I got a regear to 4.88s and a lsd put in). When I push the clutch in it feels like it goes down 4 inches and hits the floor. i can take my pinky and basically push it down about 3 inches. when I look to where the clutch piece is going though the firewall there's what seems to be a brown kind of sludge. do you think its like air in the lines of it or just replace the master and slave, bleed it out yada yada. Vecna has about 138k owned for about 2 years don't really know what was done maintenance wise before ownership, let alone even know there was a bleeder for the clutch.

@NotSoGrandGarage 2 года назад

Sounds like the clutch master cylinder is leaking. I'd replace the master/slave before it gets enough air in the system to prevent the clutch from releasing. Likely doesn't have anything to do with the gear change.

@suiflux2111 2 года назад

@@NotSoGrandGarage thank you thank you thank you, I thought I was going to end up having to do the whole clutch.

@NotSoGrandGarage 2 года назад

Certainly sounds hydraulic to me. I'd get one of the pre-bled kits and swap it out. It's pretty straightforward

@k2ffgaming372 2 года назад

New subscriber bro 😘 full support mere taraf se bro keep it up 😀 I hope you will get success in your life ❤️ ho sake to moje bhi support karna bro chota bhai samajkar🙃😅

@NotSoGrandGarage 2 года назад

Appreciate it.

@erickschaefer5886 Год назад

Sounds like your power steering pump is on its way out

@NotSoGrandGarage Год назад

Customers... and it is. They don't want to replace it yet.

@robertthrem3382 Год назад

Testing your clutch with your child in front of the jeep😢

@NotSoGrandGarage Год назад

Ah yes... cause brakes aren't a thing and it's a 4.0 on 33s with stock gearing... it won't take off on flat ground without liberal application of the throttle... but hey... good on ya for pointing it out. Safety first... ish.