Tomos Clutch Repair PT2

Подписаться 364

Просмотров 3,4 тыс.

50% 1

www.MopedRich.com
Part 1 Tomos Clutch repair: • Tomos Moped Clutch Pad...
Glue: amzn.to/2WqcmGM
Gasket cork material: amzn.to/2W5ZrLa
Wire wheel: amzn.to/2K8tN8D
Drill: amzn.to/2M83aTF
Circlip pliers: amzn.to/2YMbfPc
Hose clamps: amzn.to/2VHaw00
Workbench: amzn.to/2YNartp
Welcome back to Moped Rich. This is part two of the Tomos clutch repair.
First, start out by removing the hose clamps from the clutches.
Then with a razor blade, trim all the extra cork hanging from the sides of the clutch shoes.
Cut the cork between the clutch shoes.
Finally using the razor blade, cut the cork at an angle like a ramp at the ends of each clutch shoe.
It’s the same process for the other clutch.
Before installing the clutches let them sit in type F transmission fluid for a few hours or overnight.
Thanks for watching and follow moped rich for more moped content. Visit mopedrich.com to see some great moped builds and restorations.

Авто/Мото

Опубликовано:

3 июн 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 17

@mattiavolpe9503 Год назад

if I can directly ask for the thickness of the cork sheet, at least I'll look for it on other sites, thank you very much

@MopedRich Год назад

Rubberized cork gasket at 3/32 thickness

@mattiavolpe9503 Год назад

How can I find the cork material he uses for the repair, because I can't find it on Italian amazon

@MopedRich 3 месяца назад

You might have to try an auto parts store. I should have the thickness in the description or on my blog.

@henrykindelan6006 2 года назад

Conque material puedo vestir mi clouch centrifugo para tomos treetmate 49cc

@MopedRich 2 года назад

material de junta de corcho

@rccl4487 4 года назад

Moped Rich how do you install springs on tomos clutches?

@MopedRich 4 года назад

according to the Tomos manual, you insert the spring clip area first then pry the rest of the spring on. In the image on the manual, they are using a vice to hold the clutch while they use both hands to get the spring on.

@rccl4487 4 года назад

@@MopedRichi have tried to fit a yellow spring But ruined it like that guess u need the tool to get tighter springs on

@MopedRich 4 года назад

@@rccl4487 Ill try to get my hands on a clutch and see if i can figure out a trick, but it does make sense the performance spring is going to be a bit harder to get on there.