I’ve got a 2017 4Runner, and bought new OEM wiper blades and the right side does not sit flush on the window. They’re the exact set you have in the video. Any idea on this?
Great tips! 100% on putting down a towel on the glass. I made the unfortunate mistake of changing a wiper blade and hitting the arm when it was in the up right spring loaded position.... well one new windshield and $850 later.... lesson learned.
Love your 4Runner videos! ❤❤❤ I just purchased some rubber wiper inserts from the dealership and installed in front & rear with your assistance. Thanks so much!
Great videos, I have a 2018 Limited and they will come in handy. I'm originally from New Jersey and I am curious you seem to have a very slight accent.
I have a 2018 4runner that I tow a small teardrop camper with but the rear end drops pretty low when the trailer is on. Do you know any way to prevent this from happening? Thanks.
a spring with a higher spring rate. the 4runner, especially the SR5 springs are notoriously wicked soft and not only does the rear sag with minimal weight but the front end nose dives under moderate breaking. along with those symptoms the body roll during cornering is silly.
Thank you for helping our friend out, with the right info. This is one of the main reasons why I created this account . Let’s create a community, that together will rise stronger!
You probably should’ve mentioned there’s a correct direction to have the inserts go in. I had to figure that out myself so might as well just skipped this video entirely
Do you have the part numbers for the full wiper blades? And do the wiper blades come with the inserts pre installed or do I need to purchase a set of inserts in addition?
If you buy wipers you don’t need to also get inserts. Check the website below, great prices and should be easy to find the right parts. www.bamwholesaleparts.com/
Another DIY 4Runner video in the books!! Awesome video man. Me personally. IMO would clean the windshield and upgrade to silicone wipers for the front. But all in all great video man. Would love to see more DIY videos on these 4Runner!!