Тёмный

Toyota Tacoma Front Brake Pads and Rotors - Making it Easy, No Detail Missed! 

How2ToGo
Подписаться 8 тыс.
Просмотров 55 тыс.
50% 1

This video I change the front brake pads and rotors with this 2020 Toyota Tacoma TRD 4x4. There are other videos on RU-vid how to do this, but they leave out some critical items. I show you the details with leaving nothing at risk. Watch this video all the way through and the process should go smooth and easy the first time. This also covers many other years and models of Toyota’s.
Contact: how2togo@gmail.com
Get the product here and shop for products I use and recommend on my Amazon Storefront…. www.amazon.com/shop/how2togo
Disclaimer: Due to factors beyond the control of “How2ToGo”, We cannot guarantee against improper use or unauthorized modifications of this information. “How2ToGo” assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. “How2ToGo” recommends safe practices when working on vehicles, properties and or with tools seen or implied in this video. Due to factors beyond the control of “How2ToGo”, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not “How2ToGo”.

Хобби

Опубликовано:

 

1 дек 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 78   
@kassemadam3005
@kassemadam3005 11 месяцев назад
If you dont have a specialized tool to compress caliper pistons, you can use the old pads and a c clamp to achieve the same thing, you just have switch around several times while compressing as the pistons pop out a bit on the other side from the one that is compressing.
@ryanfarhadian5742
@ryanfarhadian5742 4 месяца назад
Great video, The details on the pins, The correct direction of the pads, The correct order of the back plates the striped and the solid, That's exactly what I was looking for. Obviously there are tons of videos out there none of them explain the details correctly. Everyone knows there's only three screws and that's it, but what you explained was the most important part of it which most diy folks miss. Even some certified mechanics miss them. Thank you I appreciate it
@WookieLove1
@WookieLove1 6 месяцев назад
Much appreciated! Very informative and detailed. About to tackle mine.
@rickhowell7137
@rickhowell7137 7 месяцев назад
Awesome video - great step by step instruction!
@kenngross5306
@kenngross5306 11 месяцев назад
Thank you for this video it is very informative. My brakes are due and I was about to tackle it myself. I am glad I watched your video first. Also thanks for showing the jack points. That was my other question.
@JesseHdez
@JesseHdez 7 месяцев назад
You missed a bit of detail in this video. Grease the pins, clean the hub, anti-seize, and torque specs. I am not trying to be rude but I am letting others know if they happen to see this.
@United1689
@United1689 Месяц назад
So what are the torque specs?
@JesseHdez
@JesseHdez Месяц назад
@@United1689 5 UGA DUGA's
@Papicodone
@Papicodone Месяц назад
@@United168990 ft lb for brake bolts
@HK416ct
@HK416ct 24 дня назад
@@United1689bro missed a bit of detail in his response
@bsc26
@bsc26 5 месяцев назад
Excellent demonstration. Thanks.
@michelpaulcote156
@michelpaulcote156 9 месяцев назад
Very well made video. Helpful. Thanks.
@seanj2932
@seanj2932 Год назад
Good video saved me a lot of time getting the rotors off with the 8mm bolt and good clip explanation
@grossfam4christ1
@grossfam4christ1 7 месяцев назад
Super helpful. Thank you so much.
@Deebohhh
@Deebohhh Год назад
Awesome job and great level of detail.
@robertkentjr5032
@robertkentjr5032 4 месяца назад
Informative, well done, and clearly explained.
@pedrobatista8980
@pedrobatista8980 10 месяцев назад
VERY DETAILED VIDEO. THANKS!
@Iamcarwild67
@Iamcarwild67 2 месяца назад
That was a pleasure to watch
@markr3660
@markr3660 6 месяцев назад
Good and to the point video, thanks
@mfrtech3857
@mfrtech3857 9 месяцев назад
Thanks, I'm doing the same to my 2020 👍
@rudyochoa6868
@rudyochoa6868 4 месяца назад
Well done video, thanks
@johnnyvdf
@johnnyvdf 5 месяцев назад
Now that was well done.
@karotte29
@karotte29 4 месяца назад
You did a great Job
@kriskerfoot5065
@kriskerfoot5065 Год назад
My 2020 in Southern Ontario. 90k. Pins were so rusted they were a bitch to get out. And where the pads go, was so rusted, the outside ones weren't even moving back and forth. Had to file down everything. Spray, and covered in anti seize. Everything is moving well, and the truck is braking a million times better
@joaquinflores-rodriguez9145
@joaquinflores-rodriguez9145 5 месяцев назад
Thanks so much your video was very helpful for me you deserve a 10 God Bless you.
@alexgomez7672
@alexgomez7672 Год назад
Thanks for this, all the details were much appreciated. Made the replacement a no-brainer for a novice like me!
@juanmercado2346
@juanmercado2346 9 месяцев назад
Just did mine! Thank you so much for sharing this step by step vid.
@HoffaJedi
@HoffaJedi 7 месяцев назад
How long did it take?
@juanmercado2346
@juanmercado2346 7 месяцев назад
@@HoffaJediabout 3.5 hrs. Impact wrench is helpful. Make a tool list first. The cylinder press could be replaced by 2 flat screwdrivers pushing the old pads evenly. I found the torque specs online.
@clos19851
@clos19851 10 месяцев назад
Nice i didnt know about that tool. I use channel locks but that looks better
@kendog53
@kendog53 5 месяцев назад
I may be wrong but I believe the brake line bolt is an 8 mm. Use that to take off rotor
@thefoxalexg8752
@thefoxalexg8752 Год назад
Perfect...
@scott8998
@scott8998 Месяц назад
Not sure if this has been commented or not. But as far as the 8MM bolt. you can just use a bolt from the skid plate.
@itsmeomar1201
@itsmeomar1201 Год назад
What the name of the device that you used for the piston!
@AlexLopez-vu8fn
@AlexLopez-vu8fn 11 месяцев назад
Good video but you forgot to pump the brake pedal so it adjust to the new brakes pads and also torque the bolts holding the calipers I think they are to 90 foot pounds thanks for the video
@jameslopez7150
@jameslopez7150 7 месяцев назад
Can you damage the caliper when compressing the piston in any way or the fluid reservoir
@mattmontis
@mattmontis Год назад
Does anyone know what the torque spec is for the brake line bracket bolt? Thanks!
@keithwatkins2643
@keithwatkins2643 5 месяцев назад
What were the threads on the 8mm bolts you bought? Just wondering if it was a certain kind or doesn't matter or that's the only thread pattern the store had? I am changing brakes tomorrow and want to have everything ahead of time. Thanks and great video.
@INTERNA9
@INTERNA9 9 месяцев назад
Thanx
@BicycleLee
@BicycleLee 2 месяца назад
So the pads have the two metal backing plates. The vented ones and the solid ones. Do they need both or do the solid ones suffice?
@LifeNRA2008
@LifeNRA2008 10 месяцев назад
What did you torque the caliper nuts to?
@gentile1947
@gentile1947 6 месяцев назад
Can you let us know what the Torque is on two Caliper bolts?
@peterbadger3943
@peterbadger3943 Год назад
Terrific camera work! Do the slide pins need to be lubricated? Cleaned with superfine steel wool? Similarly, do the edges of the brake pads need a thin layer of brake grease? Please excuse my ignorance as the only brake work I have done involved removable caliper pins that had to be greased with silicone based grease and then the caliper bracket had clips where the pads slide and that also needs a small amount of grease. I will look up the torque specs and leave them here. I would suggest that you commented on putting anti-seize on the wheel hub and I have done that making removal of the rotor easier next time
@how2togo
@how2togo Год назад
Anti seize on the wheel hib would be nice but no big deal.
@FxRxExSxH39
@FxRxExSxH39 6 месяцев назад
Forums say 8mm x 1.25 for the “rotor release” bolt.
@tomfrazer2463
@tomfrazer2463 3 месяца назад
The bolt from your Break line bracket is 8M and fits the threaded holes in the rotor
@ripshion
@ripshion 10 месяцев назад
You should use brake grease on the back and contact edges of brake pads and pins to prevent brake squeal.
@doggovision8765
@doggovision8765 5 месяцев назад
Great video. Do I need to open up the brake fluid reservoir before I compress the pistons?
@SammyEddie
@SammyEddie 13 дней назад
Yes. Absolutely. And as you are squeezing the calipers open the fluid will rise so be careful not to let it overflow
@goingdarko
@goingdarko Год назад
Best channel ever 🎉❤
@galahomes11
@galahomes11 2 месяца назад
Noticed the brake parts aren't OEM. Any major difference using the Bosch? Thanks
@how2togo
@how2togo 2 месяца назад
I didn't see a difference. Fits fine.
@ChrisBusy
@ChrisBusy 11 месяцев назад
Only detail missing/ torque specs
@HoffaJedi
@HoffaJedi 7 месяцев назад
And gloves
@misterhookerx3
@misterhookerx3 5 месяцев назад
Great video, but don't forget to torque those caliper bolts to the proper spec!
@paulmfti
@paulmfti Год назад
What jacks do you use and lift in this video
@how2togo
@how2togo Год назад
Lift is Pittsburgh.
@ElStriker777
@ElStriker777 2 месяца назад
🔥👍
@doyleredwine1683
@doyleredwine1683 4 месяца назад
no anti squeal lubricant on the back of the pads and didn't lubricate the pins. please tell me why?
@how2togo
@how2togo 4 месяца назад
No need. They have been fine without.
@PtRkCollection
@PtRkCollection 11 месяцев назад
So i need to bleed my breaks after the whole process? Or do i just press on the break peddle??
@how2togo
@how2togo 11 месяцев назад
No need to bleed.
@erickbanks
@erickbanks 10 месяцев назад
Did you just press the pedal??
@riverfisherman4255
@riverfisherman4255 9 месяцев назад
Sounded pretty confident saying no details missed but no grease was used...
@how2togo
@how2togo 9 месяцев назад
Grease for what, your hair? Don't need no grease.
@gr2030
@gr2030 9 месяцев назад
You did miss some details! You did not include what size sockets you are using! That would've been very helpful. Thank you for the video. lol
@matthewdo9027
@matthewdo9027 5 месяцев назад
Thank you sir. You need a camera man for better future videos. Sometime I don't need close up view. I can always watch the video again. 🙂
@j.w.3345
@j.w.3345 7 месяцев назад
This must be a NON NEW ENGLAND RUST BELT TRUCK!!!! Still.. a good video! Thanks!
@justindevlieger9476
@justindevlieger9476 Год назад
no details missed? How about torque specs?
@mikeball9900
@mikeball9900 8 месяцев назад
i like what your doing butt, you can't decompress the caliper without releasing pressure
@1eyedwilli3
@1eyedwilli3 Год назад
What is a BUNJAY ?
@gts5930
@gts5930 Год назад
No detail missed??? How about bolt sizes and torque specs? Little grease on the pads would be nice too, jeez.
@JORGEMARTINEZ-hr2ep
@JORGEMARTINEZ-hr2ep Год назад
U get the point on how to do the work, princess! Jeez
@gts5930
@gts5930 Год назад
@@JORGEMARTINEZ-hr2ep you his gf
@JORGEMARTINEZ-hr2ep
@JORGEMARTINEZ-hr2ep Год назад
Haha, U want him to do the breaks and torque it for you? Big Boy
@gts5930
@gts5930 Год назад
@@JORGEMARTINEZ-hr2ep Why are you answering for him? You his bitch?
@erickbanks
@erickbanks 10 месяцев назад
Did you bleed yours after, or just press the pedal
Далее
Most Common Brake Installation Mistakes!
13:29
Просмотров 4,3 млн
How to replace your Toyota brakes : Part 1 Disassembly
9:44
9 Toyota Tacoma Hidden Features You’ll Actually Use
9:59
We try Tik-Tok brake disc resurfacing method
14:33
Просмотров 447 тыс.
KINDNESS ALWAYS COME BACK
0:59
Просмотров 128 млн
Эй Рамазан # DamirAgroDizel
0:17
Просмотров 6 млн