Тёмный

Toyota V6 3.0 3VZ-E Valve Cover Gasket (Part 1 - Removal) 

Timmy The Toolman
Подписаться 86 тыс.
Просмотров 1,6 тыс.
50% 1

Did our video help you? If so, consider buying us a beer: bit.ly/3feE6tJ
In this 2 part video series, we are going to replace the valve cover gaskets on a 3.0 Liter 3VZ-E V6 Toyota engine. In this part 1, we show you how to remove all the components needed to expose your valve covers. Because we have the engine on the stand, we have a unique opportunity to show you angles of this job that otherwise wouldn't be possible with the engine inside the engine bay. This job was shown on an engine that lives inside a 1990 Toyota pickup truck but this engine also resides in 2nd gen 4runners and T100's so if you have those other platforms, this video will pertain to you.
*PARTS*
*Valve Cover Gasket OEM (need 2) amzn.to/4dDg6d1
*CAMSHAFT Rear Semicircular Plug (on back of engine) (need 2) amzn.to/3UBRWH4
*INTAKE MANIFOLD Gasket (Need 1)amzn.to/4bEugZG
*Spark Plug Tube Seals (Need 6)amzn.to/3UZKoz9
*PCV Valve (Need 1)amzn.to/3K8vGj3
*PCV Valve Grommet (Need 1)amzn.to/3WE8twH
*PCV Valve Hose (Need 1) amzn.to/3WHnVIx
*Toyota FIPG amzn.to/4byrFQE
HOSE, NO.1(FOR AIR INJECTION SYSTEM) 17341-65010 Stubborn Hose on backside that we suggested to cut
*Helpful Tools*
If you're looking for other tools not used in this video, check out Timmy's Master Tool List.
www.amazon.com/shop/timmythet...
*Long Set of Ratcheting Box End Wrenches
amzn.to/2oOhndL
*1/4" and 3/8" Flex Head Ratchet Set
amzn.to/2ql8nNA
*1/2" Drive Flex Head Gear Wrench Ratchet
amzn.to/2Wnbq2r
*Flex Head Box End Wrench Set
amzn.to/31x8BOo
*1/4" Drive Socket Set
amzn.to/2PfmaQb
*Flex Head Flare Nut Wrench Set
amzn.to/32GoIdy
*1/2” Drive Universal Impact Socket Set
amzn.to/3cIEoUp
*1/2” Drive 6 Point Standard Metric Socket Set
amzn.to/35dKQwW
*3/8" Drive 6 Point Metric Standard Socket Set
amzn.to/32WIh0M
*3/8" Drive 6 Point Metric Deep Socket Set
amzn.to/37iQjVt
*1/4” Drive 6 Point Standard Metric Socket Set
amzn.to/2QIU7te
*1/2" Drive Wobble Impact Extension Set
amzn.to/2VYERJj
*1/2" Drive Regular Impact Extension Set
amzn.to/2J7FYko
*1/2” Drive Locking Impact Extension 24” Long
amzn.to/30PQZj6
*3/8” Drive Regular Extension Set
amzn.to/2OehCao
*1/4” Drive Regular Extension Set
amzn.to/2O9nl2x
*Milwaukee M12 3/8” Cordless Ratchet
amzn.to/2utRZsE
*Milwaukee M12 3/8” Cordless Extended Reach Ratchet
amzn.to/3kOsUS6
*Milwaukee Cordless Drill
amzn.to/3MVttYe
*Milwaukee M12 Battery
amzn.to/3FJZO1j
*Milwaukee M12 High Capacity Battery
amzn.to/2HEFTpu
*Milwaukee M12 Battery Charger
amzn.to/2uo2o9x
*Milwaukee M12 HackZall
amzn.to/3LSKJfw
*Tekton Extra Long Flex-Head Ratcheting Box End Wrench Set
amzn.to/37xSDaV
*90 Degree Needle Nose Piers
amzn.to/2VYUro8
*Straight Needle Nose Pliers
amzn.to/2pQ6yIa
*Knipex Large Diagonal Cutters
amzn.to/300BRRE
*20 Piece Screwdriver Set
amzn.to/34aLrQ1
*Mayhew 5 Piece Prybar Set
amzn.to/2Ob8THw
*CDI 3/8" Drive 10-100 Foot Pound Torque Wrench

amzn.to/2U2vUA4
*CDI 3/8" Drive 30-250 Inch Pound Torque Wrench

amzn.to/3TEM8Mc
**As Ebay Partner Network members, we earn commissions from qualifying purchases.
**As Amazon Associates, we earn from qualifying purchases.

Авто/Мото

Опубликовано:

 

14 май 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 30   
@israelrodriguez6986
@israelrodriguez6986 Месяц назад
The legendary 3.slow LOL. I’ve heard people call it that.😂
@TimmyTheToolman
@TimmyTheToolman Месяц назад
Not sure how legendary it is.. it’s def known for its shortcomings. - Sean
@christophergoodwin6846
@christophergoodwin6846 Месяц назад
Sic maintenance mods! Thank you guys for always coming through for the Toyota community!
@TimmyTheToolman
@TimmyTheToolman Месяц назад
You bet! 👍🏻
@1989_toyota_red_beauty
@1989_toyota_red_beauty Месяц назад
As an owner of a 1989 Toyota 4x4 3vze standard cab pickup with the 5 speed manual transmission for over 27 years with my father being the original owner, if taken care of this engine is extremely reliable, smooth and quiet. I do change my coolant every three years. Several years ago I did the valve shim adjustment and overall I do keep the truck well maintained, so operates like a new vehicle. Also to note, my vehicle is stock.
@TimmyTheToolman
@TimmyTheToolman Месяц назад
Good to hear that your experience has been positive with this engine. Others haven’t been so lucky. Have you had the pleasure of replacing your valve cover gaskets on your engine yet? - Sean
@1989_toyota_red_beauty
@1989_toyota_red_beauty Месяц назад
Yes, when I performed the valve shim adjustment back in 2017.
@albunnell90
@albunnell90 Месяц назад
Hell yeah brotha 😮
@Stormtrooper_98Trd
@Stormtrooper_98Trd Месяц назад
Wish my 3.blow would start 🤣 miss driving mine, but 5vzfe swap coming, and I'll be using your videos for reference 👌
@TimmyTheToolman
@TimmyTheToolman Месяц назад
Good luck with the 5VZ Swap when you get around to doing it.
@Stormtrooper_98Trd
@Stormtrooper_98Trd Месяц назад
@@TimmyTheToolman thank you
@renflo86
@renflo86 21 день назад
Awesome 👏 video
@TimmyTheToolman
@TimmyTheToolman 20 дней назад
Thank you 👍 - Sean
@fredfred4083
@fredfred4083 13 дней назад
Could you remove the 4 screws at the Reed valve to lessen the struggle get the plunium up off that rear hose at the back engine?
@fredfred4083
@fredfred4083 13 дней назад
Should there be some consern of distorting or bending the cam shaft when removing the rear cam collers ?
@motorcycleman102
@motorcycleman102 Месяц назад
Please do an extensive video on doing a manual swap. I really want to do mine but if I do it’ll be the biggest job I’ll ever do
@TimmyTheToolman
@TimmyTheToolman Месяц назад
100% this would definitely be something we want to document - that future video would apply to a 89-95 pickup or a 2nd gen 4runner. we have the transmission, now we just need to source the additional parts to get started. - Sean
@efil4kizum
@efil4kizum Месяц назад
1st! ... luv this '90 rig already
@TimmyTheToolman
@TimmyTheToolman Месяц назад
Right on! We will have more updates on this build soon! Stay tuned 😎 - Sean
@albunnell90
@albunnell90 Месяц назад
It’s mine
@fredfred4083
@fredfred4083 13 дней назад
Where do you get rubber for the cam plugs covers? I just purchased 2 replacements plug cover but there's no rubberization on them
@richardramon2175
@richardramon2175 Месяц назад
Timmy, off topic question. I know you always seem to answer most questions. Without me having to go back through your many videos, what grease/lube do you use for ball joint c clamp threads??? I can't remember which product you use. Thanks
@TimmyTheToolman
@TimmyTheToolman Месяц назад
Any all-purpose grease would work.
@ZalyQQ
@ZalyQQ Месяц назад
at about 43:00 min in you got the valve covers off and its all cleaned up nice, you can see small bits and wires from the brush sitting in the little puddles of oil left in the valves. How do you ensure you clean everything out especially stuff that is deeper than you can't see?
@TimmyTheToolman
@TimmyTheToolman Месяц назад
We just wiped it out with rags, some brake cleaner and then some compressed air. - Sean
@constructcinema527
@constructcinema527 Месяц назад
Damn I need a 120 click point ratchet and some flex head 🤗🤗🤗
@TimmyTheToolman
@TimmyTheToolman Месяц назад
Those things are worth their weight in gold. I couldn't imagine not having those 120 click point ratchets and flex head ratcheting box end wrenches. Absolute game changers.
@albunnell90
@albunnell90 Месяц назад
I have the pink slip
@yotagang3705
@yotagang3705 Месяц назад
noooooo just switch the engine. engine is a pita.
@TimmyTheToolman
@TimmyTheToolman Месяц назад
You’re not wrong 😂 - Sean
Далее
7 rules to prolong CVT life
5:07
Просмотров 5 тыс.
Valve Cover Gaskets | 2nd Gen 4Runner
24:05
Просмотров 2,2 тыс.
Toyota Valve Cover Gasket Job Tips & Tricks
11:49
Просмотров 67 тыс.
СЛОМАЛИ ДЕФЛЕКТОРА НА BMW X5
0:32