Track Shark 2 !!! More Power and Updates !!! 

The two speed idea is brilliant. Nice work.

I like the reverse feature great idea!

this key captured is a very good thing I have to do the same thanks for the idea

Wow, nice work! I really like all you little mods you have done, staying low is key and the hand crank for Reverse and loading, great idea!

Quality work with simplicity! We need a winter follow up video.

That's the most impressive home made track sled I've seen yet.

cool to see you build another machine, you were a big inspiration for my build! I used a 98 mountain max tunnel and did a stage 3 on a power point 7 hp motor, used a cvt system and got a disk brake setup from princess auto. Its been a great machine for years now!

Brilliant design! Thanks!

Very cool - thanks for posting!

im happy you are alive and still building things

I like this a lot. I live in a part of the country where snow is rare. Because it's rare, an inch brings traffic to a stop. It was kind of funny one year - the snow fell overnight, and was predicted well in advance for a change. So most everyone stayed home - and my commute to work dropped from 30 minutes+ down to 14 minutes. I can't justify the cost of a snowmobile to use it 5 days a year, but a quick craigslist search turned up an old running Polaris for $500. All I'd want from it is the track module - widen it a few inches and use a skid plate between them to mount dual electric motors and battery as low as possible. Use twin throttle sticks like on the old 6x6 atv's for steering. That would make for a pretty compact low maintenance rig that would store easily.

I’m building one for sure! Awesome!!

Nice job. Still working with what you have---excellent! Good to see you back on YT. Take care. Doug

MB ingenuity at it's best! Beauty machine, wicked job. Lots of thought into that bugger. Oh, and the award for best use of "repurposed" road signs goes to....

Dude that crank is genius

Hey man, its winter! I want to see this thing rip, pretty cool job engineering this one out.

I’m also from Manitoba I’m gonna build one of these this weekend sweet video man!

Great video😊

I absolutely love the hand crank!! That is such a good idea. Its a little thing but man that would be nice if you get that thing stuck in a bank somewhere, or loading so easy like you said. Cant wait for winter. I want to see that thing ripping around.

An overall nice job Rednic79!👌

That is damn nice man!

Hey. You're back! I built one quick and dirty this year with that same series engine but the 7hp.

Looking forward to seeing you take it for our for a rip!

Looks similar to ones in Europe used for pulling logs.

Princess Auto 🤘

You can run it in the summer too. Or take it hunting it’s one of snow dogs advertising videos. Use it all year round.

Fk. Genius crank reverse 👍🏻👍🏻👍🏻

Fantastic video; thanks for the details! It looks to be a standard, 16" track that hasn't been shortened. Do you find steering or tipping over to be problems? Thanks!

We need a test video. I am super interested to see how this thing works

Awesome, what tooth sprockets did you use on both 1 and 2? Just starting building mine.

Awesome machine how about a winter update

Good to see you again! those exposed sprockets and chain look a bit scary, maybe put a cover over it? I'd love to use a track shark one day, looks like a lot of fun.

@REDNIC79 Hey man have you been able to get it out in the snow yet? just wondering how it is working

looking niiceee :-) how are you`re Amphibious Screw Drive ATV Project going ?

Great job! Just curious. What rail suspension did you used? Is this from Yamha CF300?

Hey man good to see you making videos again. Where's the video of this machine plowing thru the snow?

More videos plz lol ima building mines too

Awesome build man that had crank is a really good idea!!!!! What clutch u using ? Looking to start my own

Have you had a chance to break this out yet? I am really toying with the idea of building one. I would love to see how yours does with the new engine.

Cool machine. Great job, it looks well built and packed full of some great ideas. Very well thought out. Are we ever going to see the screw drive ATV again? Love to see that project finished.

Glad to see you uploading again! Your original inspired my build. Now I’m pb&jelous your new one has a charging coil and more hp! My 7hp is still going strong. Ultimately tricked out to ice fish too. Check it out!

How did this machine perform in the snow?

Do you got a link for the brake assembly you bought?

Any chance of an update video after trying it this winter?

where did you get the extra long brake cable

Whats the most important things to look for in a donor sled? All I can think is a good tunnel that ain't bent up?

🏆🤓👍

How did you attack the sprocket to the drive? Did you keep the snowmobile cogs and original drive? Thanks!

Hey where did you get the main drive shaft spline weld on hub

snow and ice will pack your gas governor area and freeze it if its not properly covered.... well it happened to me last year on my homemade snowdog. i was glad to have a killsitch otherwise i would have runed after it for miles hehehe...

Where did u get your sprockets and all thanks

Brother, Awesome Build! Can you use this like a dog sled and put feet rest on back of sled obviously shorting the handle bars to get you closer? Best Regards!

Hello, I'm building one of these. I have it about half finished now. Is there a reason the engine is in the front? If it was centered, would it be better, or worse? A have not seen many with the engine in the rear, I'm guessing it would not steer as well with the weight there? Any advice would be great! Thanks!

Hi man great build ! How did you find it with the 420cc motor. Do you find that it is too top heavy and topples easy? I’m in the process of building one but am stuck deciding between a 212cc or a 420cc.

Is there a reason why you didn't use boogie wheels instead of sliders? I've been thinking of building one.

Great followup. I want to build one but cant find a dead sled.

Any video content on this build? great work! , Cape Breton, NS

very cool. Any way you would be willing to sell the plans and parts list? going to make something similar for grooming the mountain bike trails in my area.

Should have a race between the 2 now, see how much the weight actually effects it

how much do you normally pay for a set of used track and sled? i wanted to make myself one of these in the past but it was about 200-300$ just for the track kit...

Такой в России придуман 50 лет назад.Сейчас производится очень большое количество и на многих фирмах.Заднюю скорость надо и полкач-управлять спереди.

You in Manitoba by any chance?

Twice the power to haul twice the amount of inebriated friends around!

@Rednic79 hey, great work. Like the crank. want to go for mass production? Please let me know. I definitely sell a few here in Alberta!

You’re in Canada? You selling your old one? 😀

Take that thing out on the dirt and rip on

Nice build! Hopefully the extra engine weight up top doesn't bite you in the butt. Mine is kind of tippy just with a 212cc. I like your hand crank idea - I cut my jackshaft off a bit too short to add that unfortunately. I watched your original Trackshark video about 20 times for inspiration and ideas! These little DIY machines are awesome winter transportation - I can't wait to get out on the snow with it again. Rich in Ontario. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-SrHFxJlh2To.html

You got a part number for that comet?

We’re you selling this on kijiji?

Hey there can you build me one of I will pay you for your parts and labor done? Please let me k know thank you much appreciated 👍☕