Тёмный

Triggered Precision Machine - Company Update / Rifle Review / 2023 TPM KYL Shooting Challenge!!!! 

Triggered Precision Machine LLC
Подписаться 3,8 тыс.
Просмотров 1,2 тыс.
50% 1

I'm back!
After a little over a month of turning and burning, I'm back to the RU-vid stuff. Today's video is a simple company update, quick review on a nice little lightweight hunting rifle build, a re-review of the Aero Precision Solus build I am now calling the "Everyman Rifle", and an introduction to the next TPM shooting challenge.
Some upcoming video topics:
-Rooting out reasons for accuracy problems in your rifle.
-Precision Rifle Training Drills
-CCW Pistol Training
-Reloading - Neck Sizing Version 2.0
And More!
OFFICIAL RULES FOR THE FALL 2023 TPM K.Y.L. CHALLENGE:
Any rifle, any cartridge.
Shoot from front bipod / rear bag, no mechanical "rail guns" of benchrest stuff.
Any magnified optic
Shot from 100 yards
Unlimited attempts, but please record your attempt number on the target. BE HONEST!!!!
This is free to enter
Comply with all Local, State and Federal Laws
This contest is held and sponsored solely by Triggered Precision Machine LLC
Prizes will be determined by the number of entries
-Contest will run until December 1, 2023.
The contest target is downloadable for free at: triggeredpreci...
*** All personal information gathered for the purpose of conducting this contest will be held securely and used for no other purpose other than the administration of the above described contest. All information will be properly destroyed at the conclusion.
***Entries that don't comply with RU-vid's Community Guidelines will be disqualified.
Link to RU-vid's Community Guidelines: www.youtube.co...
Thanks everyone, keep the rifle orders coming in!
-TPM

Опубликовано:

 

8 окт 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 44   
@maxcoatlhunter4322
@maxcoatlhunter4322 Год назад
Thanks man! Beautiful builds Shawn! Keep up the good work!
@triggeredprecisionmachinellc
Thanks, will do!
@justice1327
@justice1327 Год назад
You need to have Benchmark barrels available,too.
@triggeredprecisionmachinellc
That's on my to do list. Thanks for the reminder!
@ChadCooper03
@ChadCooper03 Год назад
Great stuff!
@triggeredprecisionmachinellc
Thank you!
@jdrollason
@jdrollason 11 месяцев назад
I will have to try this target with my 6GT build on a Solus action with a Criterion Savage SS build. If anything, I love a decent target
@triggeredprecisionmachinellc
@triggeredprecisionmachinellc 11 месяцев назад
Those KYL targets have humbled me more times than I can remember. 😂 How do you like your Solus build? I've sold a ton of em and had nothing but positive feedback.
@jdrollason
@jdrollason 11 месяцев назад
​@@triggeredprecisionmachinellc the barrel and Go Gauge shows up Tuesday so we will see. Any advice on using the Aero sleeve would be appreciated because that is what I'm using. Other than that, I really like the action. I'm really excited to get it up and running
@haisardao8224
@haisardao8224 Год назад
Good stuff! I was getting worried!
@triggeredprecisionmachinellc
I felt bad, I enjoy the RU-vid stuff but it's been so damn busy!
@jasonrad9332
@jasonrad9332 Год назад
Good stuff, can’t wait to shoot the KYL. Love my new TPM trucker hat!
@triggeredprecisionmachinellc
I just got some new sweatshirts in. They are slick!
@jasonrad9332
@jasonrad9332 Год назад
Love the sweatshirt. Shot my KYL today and got a first time GO. Must have been my TPM hat. I’ll shoot you an email with details.
@audieladd2476
@audieladd2476 Год назад
Tikka T3x Action, Proof Barrel, MDT HNT26 Stock and a big WOW! on both accuracy and cost!
@triggeredprecisionmachinellc
She sure turned out good.
@audieladd2476
@audieladd2476 Год назад
Oh ok, have you used a Tikka action in the past?@@triggeredprecisionmachinellc
@rflguru
@rflguru Год назад
Love seeing you wear my Rifle Guru shirt! Can’t wait to get my hands on the 2 builds you’re doing for me 👊
@triggeredprecisionmachinellc
I'm gonna wear that black shirt right out, I love it!!!!! The logo and everything is just awesome. We're getting close on your builds, Manners holds the key 💪🏻
@rolliskarvellis6254
@rolliskarvellis6254 Год назад
The customers who think a rifle that is test shot by the manufacturer is used probably doesn't understand that all firearms are proof tested before leaving the plant. Sometimes the proof round will be double of the maximum standard load. With a .308 Winchester, 15 rounds is just a wakeup call for the day. Enjoyable video.
@triggeredprecisionmachinellc
Yup, some people are hard headed. LOL I laughed a little about the "wakeup call for the day" analogy. Can't be more true. Thanks for watching!
@toddb930
@toddb930 Год назад
Thanks for sharing your second attempt at KYL target. That looks like something i would do. 🤪 Looking forward to the Solus/Krieger/TT barreled action from you.
@triggeredprecisionmachinellc
I cannot wait for you to shoot this thing. Amazing. That's all I can say about it.
@toddb930
@toddb930 Год назад
I have a KYL contest question. If I use a different rifle does the "attempt number" start at '1' or does it continue with the total number of attempts?
@johnknouse8846
@johnknouse8846 Год назад
Congrats on getting the business going full speed! Besides having to deal with some knot heads occasionally, it sounds like you really enjoy building those pew pews! And I think every company tests their rifles and pistols before shipping them out. If not, and a mistake was made with headspace or something, imagine the liability! I love these challenges you are doing. I can shoot sub 1/2” groups all day (well most of the time!) but when there is a challenge or contest, or just competing for bragging rights with friends, it turns the heat up a bit! Can’t wait to give this one a go!
@triggeredprecisionmachinellc
Exactly. Every manufacturer out there tests their guns before they sell them. Good luck on the challenge!
@johnknouse8846
@johnknouse8846 Год назад
@@triggeredprecisionmachinellc I was WAY too confident today. Took my 6.5 creedmoor to the range, and took 2 challenge sheets. My thought was, I’ll clean it on the first try, then have a second sheet to kill some time and have some fun. First sheet, missed the 5th shot by almost an inch! Don’t have any idea how I missed it that bad, but I went down range and put up my second target. Again, first 4 were easy, and then I put the 5th shot on the edge, less than 50% inside the target!! I’m gonna try it again with my 6mm creedmoor, but I was humbled!! That last target is tiny at 100 yards for sure!
@nt_wicked_bunch2717
@nt_wicked_bunch2717 Год назад
Awesome challenge, I missed the last challenge and I’d like to try it out on my fireball. That sucker is a dang tack driver. Gotta have a no wind day though😂
@triggeredprecisionmachinellc
Get after it! Good luck!
@longrangeredneck1335
@longrangeredneck1335 Год назад
This is a great challenge my group of guys are going to shoot it this sunday
@triggeredprecisionmachinellc
Absolutely outstanding sir, send em' in when you're done.
@whitecollarbehindtheglass6214
Do you make barreled action only?
@triggeredprecisionmachinellc
No sir, full rifle builds are my bread and butter but barreled actions are very commonly requested.
@justice1327
@justice1327 Год назад
What, in your opinion, makes the Terminus action superior to Defiance or Lone Peak?
@triggeredprecisionmachinellc
Hmmm. A few things... 1. I think the overall "fit and finish" is better. All the machining is clean and the parts are aesthetically pleasing. 2. I prefer the ion bonded action and bolt over the bare stainless actions. 3. I really like the 60 degree bolt throw and like the 3 lug action. 4. I've seen better dimensional consistency with the Terminus than the other close competitors. 5. The roller tipped cocking mechanism is smooth and offers a great feel. 6. The quick change barrel feature on the Zeus is simple and shockingly repeatable. 7. AVAILABILITY! This is huge for me. I refuse to wait 15-18 months for a standard Defiance Deviant action. I know exactly what goes into making one. This doesn't make sense. 8. Price - For the inclusion of the features and characteristics listed above, the Terminus actions come in cheaper than the Defiance equivalent. As for Lone Peak, I've had exactly two in my shop and I think they are nice, but their stainless actions are pretty standard, not too much exciting about em. Decent price though. The Fuzion Ti is pretty darned awesome at 23 ounces. Great place to start a light weight hunting build.
@justice1327
@justice1327 Год назад
@@triggeredprecisionmachinellc Thank you for the detailed reply. Made some good points.
@timscarbrough8931
@timscarbrough8931 Год назад
ACE Barrels..!For hunting medium/large game 200m or less is fine.But absolutely not for PRS,ELR,Bench rest or anything like that.. Ace has a little way to go before they get to top tier.. you would think they should be in 2023. Thanks
@triggeredprecisionmachinellc
Good information! Thank you!
@tommyj7087
@tommyj7087 11 месяцев назад
Do you stock in left handed actions?
@triggeredprecisionmachinellc
@triggeredprecisionmachinellc 11 месяцев назад
I do not, but I can order whatever you need.
@philipsteele5704
@philipsteele5704 Год назад
Most factory rifles, Weatherby and many others test fire the rifle before it is shipped, are they used. No they are test fired as they should. be..
@triggeredprecisionmachinellc
Yup, 100%.
@charlesmullins3238
@charlesmullins3238 Год назад
My ninja…..🫡👊🏻…
@triggeredprecisionmachinellc
Matt! Thanks for watching dude!
Далее
I Did This With Coffee! 🤯☕️ #shorts
00:22
Просмотров 849 тыс.
ELK WEEK - The 7 Essentials for Elk Rifles
22:31
Просмотров 28 тыс.
Rifle Setup
26:53
Просмотров 2,3 тыс.
The Whaling Harpoon Cannon (The BLUBBER BUSTER!!!)
17:03
Rizzini Factory Tour: The Film!
1:00:27
Просмотров 414 тыс.
Why doesn't my rifle group?
23:52
Просмотров 2,5 тыс.
I Did This With Coffee! 🤯☕️ #shorts
00:22
Просмотров 849 тыс.