Good video, glad I'm not the only one this happen to. mine was burnt pretty bad. couldn't salvage the pigtail pin. Any idea on a part number for a pigtail pin to attach to the wire?
My black plug on the module would not come un plugged as it was melted to the module. My fix was to remove the back cover off the module and solder a wire to the back of the board on the corresponding ground pin, I then tapped the wire into the ground wire.
@deadpool _F150 on my f350 its the green wires that are a little melted not the black like yours, im trying to find a fuse because i changed the box, it didnt fix it, and even though the wires are a little burnt looking they are still pretty solid. i can only find a fuse for the rear seat, not the front
Hey I’m having the same issue. Looking into how to pop that ground pin out and move it over to the next slot. I really don’t want to cut the wire. Have you fixed yet?
Use like a thin/jewellers forcep to push down the metal spring that 'locks' the metal end. Once you've done that you'd be able to pull the wire off. Then just pop it on the next slot.👌 see the empty spot on how that metal tab works
I had the same issue and I was getting frustrated 😂 so I used pliers and twist and pulled. The plastic is melted in there so you will need to use force, preferably a tool would work better than your own hands. Just be careful.
