Тёмный

TRX4M - Furitek Bettle Deep Dive Install, Stinger and a bunch of awesome 3Flow9 Upgrades!! 

The Shop - Mini RC
Подписаться 10 тыс.
Просмотров 4,7 тыс.
50% 1

Upgrading the TRX4M Bronco to the new ‪@furitek‬ Bettle Titanium chassis with this full install deep dive! Adding the #Furitek brushless motor and esc really brings this thing alive! We also get some ‪@3flow9rc10‬ anodizing done and add some more #3flow9 upgrades to this little beast!
#rccrawler #18thScale #miniRC #rcrockcrawler #rockracer #rockbouncer #gofast #rcbuild #trx4m #axial #fmsmodel #traxxas
Purchasing from these links may or may not help support the channel, just depends on the link! (But they are here for your convenience.)
FURITEK BETTLE TITANIUM (RAINBOW) COMP CHASSIS FOR TRAXXAS TRX-4M: furitek.com/collections/traxx...
FURITEK STINGER 118 BRUSHLESS POWER SYSTEM FOR TRAXXAS TRX-4M: furitek.com/collections/traxx...
3FLOW9RC Traxxas TRX4m Rear Link Riser: 3flow9rc.com/products/traxxas...
3FLOW9RC Traxxas TRX4m High Profile Flow Skid: 3flow9rc.com/products/traxxas...
3FLOW9RC Titanium Anodizing Service: 3flow9rc.com/products/titaniu...
FastEddy Bearings Compatible with Traxxas TRX-4M: amzn.to/3LYBgqH
0:00 Intro
1:05 The Chassis
3:11 Furitek Electronics
4:07 Chassis Removal
7:35 Stock TRX4M Motor and Trans Disassembly
9:04 TRX4M Transmission Bearing Install
10:43 Installing the Furitek Micro Komodo & Crawl Gears in the TRX4M
13:42 Installing Bettle Chassis
15:32 Shocks and more Chassis Work
19:50 Electronics Install
24:56 3Flow9 Flow Skid and Rear Link Riser
35:09 We put in another servo and weigh it.
36:28 On The Rocks!
39:57 Final Thoughts
We now have shirts and stuff! Find it all here: my-store-4267224.creator-spri...
Bench Gear:
AMIR 28 IN 1 Cordless Mini Power Precision Electric Screwdriver Set: amzn.to/3VIAD6i
The Sickest FIELD BENCH EVER - Turtle Laboratories Portable Hobby Workstation Work Bench: turtlelaboratories.com/produc...
Pro'sKit 900-015 Helping Hands Soldering Aid: amzn.to/3DkNkfx
Lifegoo Heat Insulation Silicone Repair Mat: amzn.to/3Luf44d
SCX24 Toolset: amzn.to/35mjXgh
ANBES Soldering Iron Kit, Upgraded 60W Adjustable Temperature Welding Tool: amzn.to/3u7Owjq
UNIWEIGH Gram Scale,200 gx0.01 g( 7.05 oz x 0.001 oz)Digital Pocket Scale: amzn.to/3u71oWT
Servo plug splitter: amzn.to/3Z7678j
Recording Gear:
Blue Yeti USB Mic: amzn.to/3J4Bnf4
Apple Lightning to USB3 Camera Adapter: amzn.to/3LvwaP6
Pasow USB A Male to A Female Extension Cable (50 Feet(15m)): amzn.to/3J4Bnf4
Camera Stand 1: Custom Built
Camera Stand 2: amzn.to/3wJszZH
Camera Stand 3: amzn.to/36wqwgZ
Camera Stand 4: amzn.to/36xhSib
70 LED Video Light with Adjustable Tripod Stand / Color Filters, Obeamiu 5600K USB Studio Lighting: amzn.to/3lK56Rq

Развлечения

Опубликовано:

 

10 июл 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 49   
@canders7133
@canders7133 10 месяцев назад
Super Bettle
@TheShopMiniRC
@TheShopMiniRC 10 месяцев назад
Thanks a ton for watching!!!!!
@paulgarcia8846
@paulgarcia8846 Год назад
Super Bettle! Great Vid!
@TheShopMiniRC
@TheShopMiniRC Год назад
Thanks a ton for watching. We are loving it.
@giopirmisashvili5514
@giopirmisashvili5514 4 месяца назад
Thank you
@TheShopMiniRC
@TheShopMiniRC 4 месяца назад
You're welcome
@joshadams2792
@joshadams2792 Год назад
Thanks .definitely going to order one .
@TheShopMiniRC
@TheShopMiniRC Год назад
It’s awesome.
@suemisslbeck7023
@suemisslbeck7023 Год назад
Another great build Ken. Thanks for the tips, always learn from you.
@TheShopMiniRC
@TheShopMiniRC Год назад
Huge thanks for watchin!!
@crawlerballer
@crawlerballer Год назад
Super bettle 🙃
@TheShopMiniRC
@TheShopMiniRC Год назад
Thanks for the watch!!!!!!
@rcjoe406
@rcjoe406 Год назад
Very cool
@TheShopMiniRC
@TheShopMiniRC Год назад
Indeed.
@andrewrichey7374
@andrewrichey7374 Год назад
Super Bette Looks pretty awesome Yep we was here watching
@TheShopMiniRC
@TheShopMiniRC Год назад
Thanks for coming!!!
@Rc_Alex_76
@Rc_Alex_76 Год назад
Always a detailed build very helpful thanks
@TheShopMiniRC
@TheShopMiniRC Год назад
Huge thanks for watchin!!!
@jimkrug2586
@jimkrug2586 Год назад
Super Bettle!! I built up one of the ti Bettle chassis' and added some brass down low and 65mm pin comp tires and it will go almost anywhere I point it. Such a great rig!!
@TheShopMiniRC
@TheShopMiniRC Год назад
Sounds great! I def need to add some down low weight.
@gibsonlife573
@gibsonlife573 Год назад
Furitek if you have any plastic head all in your truck you better switch it for you right now there's just so much low in for and then high speed I know in the fmx that it is insanely fast especially on 3s April do donut of on donut I'm sure if I didn't have the front in so weighted down that it would pop wheelies
@LARANUD
@LARANUD Год назад
Can you try the horizontal servo mount on it
@TheShopMiniRC
@TheShopMiniRC Год назад
Once I get another one I definitely will.
@gibsonlife573
@gibsonlife573 Год назад
I don't think there's no way in hell in that plastic transmission gears are going to hold up to that
@TheShopMiniRC
@TheShopMiniRC Год назад
I have other trucks with plastic gears and furitek systems (and other even faster motors) and they are holding fine so far. Make sure your mesh is good and don’t force throttle when clearly stuck.
@gibsonlife573
@gibsonlife573 Год назад
That's why my don't hold up because I forced throttle when stuck it's like Matt from 2fmrc says I want to go where I want to go LOL but yes I do believe plastic years can hold up because I got the plastic little ring inside of the FMS transmission everything else is metal only the shifting Fork bring his plastic also another note if anybody's having trouble with the FMS FCX 24 Power Wagon transmission not wanting to shift after installing steel gears in the transmission I have found out that it is not the gear set it is the wire that is on the servo then shift the gear for you if it's straightened out at all it needs to have like a slight 45 in each end cuz I ended up finding mine to a complete 90 and it wouldn't work no matter how much I adjusted the servo trim it still wouldn't catch both gears
@kennethrobinson9008
@kennethrobinson9008 Год назад
Great video! I would like to see a comparison with and without the anti-squat link riser.
@kennethrobinson9008
@kennethrobinson9008 Год назад
Super Bettle!
@TheShopMiniRC
@TheShopMiniRC Год назад
If we ever get time. Sooo many projects.
@kennethrobinson9008
@kennethrobinson9008 Год назад
@@TheShopMiniRC I hear you. Nice to have too many projects in this hobby.
@gibsonlife573
@gibsonlife573 Год назад
I think if we can put more tricked-out rides and people's hands and show him the things they can do it would be a lot more interesting the people will there be a lot more views on everybody's Channel
@TheShopMiniRC
@TheShopMiniRC Год назад
I like to show people that they too can do upgrades and builds.
@gibsonlife573
@gibsonlife573 Год назад
Metal Gear sets are not that easy to be found right now there's a quite a few of them on eBay but they're not the low speed I was looking for the 80 3 1 found 40 3 1 I believe that is how it ended up being or something like that
@JeepinMaxx
@JeepinMaxx Год назад
Can you thread the shock mounts to 2.5mm? That way you could use the stock shock bolts with no need for nuts (or is the chassis too hard to thread with the new anodizing)
@TheShopMiniRC
@TheShopMiniRC Год назад
You might be able to rethread them. I was tempted to try and just force the stock screws in, but decided against it.
@KBRC81
@KBRC81 Год назад
I want to order one and just swap all the stock components but I've seen complaints about the stock ESC being a very tight fit and plugging the battery in can be a real pain. Idk, maybe de-casing it would help. That roof needs a hinge exactly for this reason. Edit : SUPER BETTLE!
@TheShopMiniRC
@TheShopMiniRC Год назад
I actually didn’t screw in the back 2 screws so that I can hinge it. The stock esc is pretty large and would probably do well to be decased. Edit: thanks for watching the whole video!!!!!
@axetogrindproductions4153
@axetogrindproductions4153 3 месяца назад
he says still has the blue and the purple and the .....its still a rainbow lol
@TheShopMiniRC
@TheShopMiniRC 3 месяца назад
lmao...
@user-br1yo1kk3b
@user-br1yo1kk3b 3 месяца назад
you can also use this chassis for the trx4m k10 ?
@TheShopMiniRC
@TheShopMiniRC 3 месяца назад
Yeah, you might need some minor adjustments though.
@marcinsochacki8707
@marcinsochacki8707 Год назад
it is not more a TRX4m, it is more like a buggy. Is there any chance to see some leds on the roof or in bumpers? This Stinger will be dope with some leds inside of the engine. As always - good vid, great job thx:)
@TheShopMiniRC
@TheShopMiniRC Год назад
What makes a TRX4M? The body? I would definitely like to get some lights on it or some sort of front bumper. We will see over time how it evolves. Huge thanks for watching!
@gibsonlife573
@gibsonlife573 Год назад
Mmm more of a common screw they probably got billions of them that's why sure they use them on more than one I know they do because I have the same stuff on the FMS
@TheShopMiniRC
@TheShopMiniRC Год назад
Likely.
@thudtrades1850
@thudtrades1850 7 месяцев назад
You complain alot....
@TheShopMiniRC
@TheShopMiniRC 7 месяцев назад
What am I complaining about? Lmao
@PA7Erwin
@PA7Erwin 11 месяцев назад
Super Bettle
@TheShopMiniRC
@TheShopMiniRC 11 месяцев назад
Thanks for watchin!
Далее
FastEddy Bearings TRX 4M Bearing Install. Step By Step
51:20
Scx24 brushed 3s? viable?
12:01
Просмотров 107
Ultimate TRX-4M Crawling Upgrades
10:51
Просмотров 6 тыс.
Мужчина С Золотыми Руками 💪
0:42