Turnigy Flysky GT5 test part 2 4 wheel steering ABS and throttle Gyro 

greetings from the Dominican Republic raymondcellsupply, thank you very much for uploading this video, it has been very useful for me to configure and use the ABS system in my traxxas Slash 2WD modified for Dragueo

Good job man, that’s a killer radio!!! Probably the best bang for your buck. 😃👍🏻

Definitely works better than I expected with 4 wheel steering very impressive truck and controller

I try to keep up with this Series of yours on the GT5...... The more I see, the more I want one!!! It'll take me quite a while, but I've GOT to have one! I'm older, haven't been Pro in over a Decade, I've stopped caring about what's "fair" or not in RC!! Those Gyro/ABS features in the Receiver are a real game changer. They've been out for a while, but I haven't seen them all together, in a more Budget Friendly Radio!! I would easily break my newest Rule - can't spend more than $40.00 for a Radio anymore...... But I gotta TRY to get this one! 😱😵 The ONLY thing I haven't been impressed with so far, was when you showed the Manual on setting ABS, and the Book stated "Setting *Breaking* Force"!!! 😬😱😱😱 Yeah, OK, most English Speaking people today weren't taught the difference between Automotive *Brakes,* and *Breaking* some object, often an accident. Now, I've been giving up my Grammar Nazi duties over time.... The problem is just *TOO* big.... BUT, that's a BOOK!! People refer to those for information and education - NOT MIS-education!!! OK, off my Soapbox. Outstanding Radio! As I've been finding usual with your Channel - excellent Review!! 👍👍👏👏👏👏👏 Carmine 🚂

Where can I find instructions for this controller? Mine only came with quick start nonsense.

Thanks for your informative video, it helped me to understand and set up my new Flysky GT5. Excellent transmitter and a receiver (with gyro) bundle. Very happy with it. Cheers

Just picked one of them up Joe and put it on my x-max cuz my stock one had an issue and I absolutely love the thing still trying to figure out all the settings on it cuz I'm used to the stock radios but man thanks for your explanation of what some of them settings do it really help me out

Thsi is cool man that makes the 4w steering alot easier

I ended up buying one after ur video yesterday,they were out of stock in US but had them in China so with shipping it was cheaper for me to buy the flysky gt5 off amazon

I got the Flysky GT5 which is the same radio. I haven't been able to use it as the weather in my area has been wet and cold. I got it because it has 6 channels and a bunch of features but is simple to adjust and it was only $90. I bought mine from RCNetwork on eBay by the way.

Awesome man. Thanks for the demo. I just got my gt5 so this was some good info.

You got to bring it work that's a cool truck

😲Looks pretty good!

With the 4WS...do you have 2 servos in to 1 channel? Or Servo 1 in Ch2...and Servo 2 in Ch3? I'm setting up a 4WS on my Tamiya Dynahead and wasn't sure if I need to use a Y lead in to one channel? Cheers. 👍

You can make practicsl effective changes to SVC and ABS without turning on the vehicle. Just use remote and use the setting you are changing. In real time time it shows you the signal you are using so you can see what adjustments will do (*or are doing) before trying them.

Wow. I currently have a Futaba 4PV in my SMT10 but they only made a gyro for drift cars. It needs a gyro though due to horrible torque steer and high center of gravity. This is the first radio I've seen that allows the gyro to be active with four wheel steering. The only thing holding me back is the lack of telemetry.

When in crawl mode. What channels do you have the servos plugged into?

Thx this was very informativ. Greetings from germany

Can you assign the different four wheel steering modes to one of the buttons so you don’t have to go into the menu and you can cycle through them on the floor

Do you have to put your rear servo in position 3 for this and do you need to assign it on the controller?

Hey can you do a video on the gt5 gyro setup, I ve watched your videos but haven't found one on the steering side of the gyro?

You have also by gyro priorety, you can tun full gas

Really disappointing they didn’t put the crawl feature on a switch. Even the cheap 24 scales have a straight button to change crawl modes.

How did you wire the two steering servos to the receiver? Are they linked in the same port?

It's weird that the manual say BRK is brake amount. It's not. Max or Top of brake pulse/brake amount is set by your esc or your tx/rx. BRK sets the amount of brake at the BOTTOM of the pulse. Example. You have BRK set to 100%. 100% is no or zero brake. So it pulses between your max brake force and zero brake force. This will be really loud pulses slamming full on and off. Not best performance. If you have BRK at 0% then the bottom of the pulse is the same at the top and you wont have any pulse or brake reduction at all. I like %40. Gt5 is great, it shows real time the signal change you receive from adjustments so go to the ABS BRK setting, hold brakes down all the way, and adjust the BRK value as you do this. You will see it's the bottom of the brakes pulse setting its changing. Your brakes arent pulsing between off and a value you set in abs... *Your ABS is a brake reduction pulse that pulses between your full brake amount and a chosen reduced brake % and you can choose that to be 0 or 100%. Then theres the other settings yup.

When I'm doing 4-wheel steering where do I run my second Servo what channel? is there a specific spot for it, for the function to work in crawler mode?

Great video thought about getting one of these can you set the steering mods up to cycle off one of the buttons where you can switch from the different story mode on the floor or do you have to go on the menu. Also is this pretty easy to use with them steering

Great video. Now some questions. I have a TRX4 can I bind the radio to the traxxas receiver or do I need to use the BS-6 receiver? If I have to use the BS-6 will channel 4 work the diffs selection and channel 3 hi low gear? Can you bind to different receivers for each model? Thanks

What setting would I want to use if I want to use the Gyro and throttle stability control with a 4 Wheel Dr. buggy? Will it work OK with that kind a four-wheel-drive and not a crawler

hi "exo" and again thx. for this (and the first part) presentation. mounted everything now in my JLB 21101, and tested also ABS. all the rest including gyro runs nicely, but looks like ABS is not properly usable, because pulsing applies both to braking and reverse. makes no sense, if the car is "caughing" while driving backwards, as it can be seen here. can´t see any workaround to solve that properly - except if i switch off the "brake function" in the ESC (which is not neccessary or helpful either) but mainly only drive forward almost all the time. in my case, i see ABS as non usable; only way might be to adjust the trigger point high, so pulsing only kicks in at full (

Is it possible to setup drag brake through the radio? And it is possible to disable the gyro completely?

Amazing video! Would you recommend gt5 or gt3c/gt3b for a 4ws crawler? Thanks heaps

Thanks for the review I'm looking at one of them for a 1/8th Exceed Mad Torque..Crawling with 4ws when needed, is it easy to switch back and forth 2ws-4ws?

So you can shut the gyro on and off

Hi the I purchased this Gt5 , I am new to the hobby, the thing is I have no idea to calibrate this GT5 to my rc crawler, it would be great I you had a video to show a basic calibration for a crowler, thanks

Are there any programable buttons?To control the 4ws modes.

Any issues with the abs brakes pulsing you in reverse?

Abs는 레버를 후진으로 넣어야 작동하는곤가요?

Hello my friend ! , have a question about the 4w steering , on what channel do you connect the 2 servos ??, on the manual it said that the rear wheel steering servo goes on the 3rd channel , but what if I want to use that 3rd channel button on the radio to turn some lights, it wil mess up with the rear steering ??, Thank You !!

Got a question you ever get svc not supported was trying to use it and I keep getting that message on the screen

Can u put a link in the discription were we can buy that remote

What truck is that?

Have you had any connection losses with this remote...I have the gt3 and it's just started doin it and this remote looks like my next just wondering about the connection

Show this video link in a new upload. I dare ya

What truck is that?