No video :(

Gt5 Channels 3-6 pt3

Подписаться 73 тыс.

Просмотров 41 тыс.

50% 1

Simple video showing channels 3-6
IN THE USA
rover.ebay.com...
FROM CHINA
rover.ebay.com...
Receiver
rover.ebay.com...
Over time we figure out what works and what doesn't, Castle ESC's are awesome along with other stuff, below are a few things I'd say are pretty good for most scaler stuff. I'm not selling, just giving recommendations
Castle Sidewinder 4, if you want to get the most out of an unsensored brushless motor, this is the best from what Holmes told and showed me. It also runs brushed motors.
rover.ebay.com...
Castle MambaX, this is THE best esc on the market for scalers and it runs brushed motors too.
rover.ebay.com...
Castle Mamba Micro X for those times where space is tight.
rover.ebay.com...
Crawler Innovations Lil Nova foams, just awesome for any scaler tire
rover.ebay.com...
Castle Slate motors, awesome power and smooth control when paired with the Mamba X esc.
rover.ebay.com...
Castle BEC 10a, can't go wrong here for all those big HV servos.
rover.ebay.com...
Savox 1230 is awesome and can turn most anything
rover.ebay.com...
MIP Driveshafts, buy them once and you're good to go
rover.ebay.com...

Опубликовано:

27 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 141

@customhawk 3 года назад

This was exactly the information I needed that I could not find anywhere else as easily explained! Love you channel sir!

@ExocagedRC 3 года назад

Awesome, thank you!

@mogreasy8499 3 года назад

Man you are the best! I just got my Axial Bomber and controller that you suggested and just wanted to get some insight on it and low and behold you made a video. It was informative and explained easy enough that just about anyone would understand. 👍😀

@ExocagedRC 3 года назад

awesome man, glad you found it!

@ibgscalecrawlers7226 2 года назад

Watch all of his new vids but didn’t expect one about a flysky this helped me understand it so much

@ICanDoItMyself 9 месяцев назад

This is an OUTSTANDING explanation video!!!! I'd like to see something like this for the G7P allowing mixing of channels for 4ws. I know this one can do it but have to do it in the Crawl menu. I'd like to see it with the push of a button.

@blacksheeprc8113 2 года назад

Again thanks for explaining some of this stuff man you just save the day I knew the controller was good but now that I can work it is for some reason mine only came with a little single peach she didn't give no explanation on what nothing and no the buttons did nothing so thank you

@WestDesertShooter 4 года назад

So helpful thank you. Way better than terrible translated instructions!

@customdrums Год назад

I like the simplicity I think this is the one to get for my phoenix

@fishycomics 6 лет назад

Thank you for the share well explained , taking the time and showing liked that. FISH

@samaanam76 5 лет назад

The video I was looking for. Thanks.

@Clickbaiters 6 лет назад

Nice, you made a follow up video on this transmitter! After heavily comsidering my options, I ended up ordering a Futaba 7PX from overseas. While I do understand that the GT3C hacked is the true gem of current radios, I simply don't like the menu system. I do find consolation that the HobbyKing "Orange" RX that will work on Futaba radios but I'll have to see if I can find a 7 channel compatible Orange RX.

@ExocagedRC 6 лет назад

Cool. Let me know how it all sets up please and if you do find a cheap RX that works, I’m interested in that too

@Clickbaiters 6 лет назад

Exocaged RC Will do, I'm going to dedicate some time this weekend to finding a compatible Orange RX if possible and order it. My radio isn't expected to arrive for several weeks since I really had no choice but to order from overseas due to no US stock because of the Hobbico situation. I'll definitely keep you posted but know that it won't be anytime soon unfortunately lol.

@OswaldBeef 4 года назад

the gt3c is only 3.7V 1S AFHDS and doesnt have anywhere near the range of anything flysky with AFHDS 2A

@krashkingrc9715 6 лет назад

Nice video looks like a radio great demonstration

@jacobhenson3952 6 лет назад

I really really like your review style. I’m needing a radio for my X-MAXX. I’m running a castle XLX and a TP motor and thinking about giving this a try.

@ExocagedRC 6 лет назад

I really like the gt5 and have it on 4 different trucks now

@LRCR 3 года назад

Thank's again Brother Joe 💯 I know this is a dated video but I am getting my 7 year old this for Bday along with the TRX 4 Sport RTR so we can add features as he grows 😁🎊🎉 ✌🤠👍 HFLPRCing 👍😎👍 AOAH 🌟 RCF4L 🙏 Stay Safe and Play Healthy Brother

@facebiter 4 года назад

Mate what a great easy to follow video. Thanks! Sub'd!

@claudiadickerman4218 5 лет назад

Thank you cause ive been trying to figure out which channel is for steering/Throttle Brake

@vaamorais 3 года назад

Great tips, very well laid out. I purchased this radio. to use with the TRX-4 Defender and although I managed to make all channels work, for this particular vehicle I would prefer to have 3. of the channels perform the way channel 3 does - like a 2 position switch. This way I could control 1st and 2ng gears with a 2 position channel and the same for front diff and for the rear diff. Maybe there is a work around to configure channels 5 and 6 to work as a 2 position switch? Or channel 4? Really like to have your take on this. Thanks

@ExocagedRC 3 года назад

There is no key mapping on this radio so we are stuck with that channel and that switch. Otherwise I really like the radio

@blacksheeprc8113 2 года назад

I also had to get a 6-channel receiver for mine because mine showed up with the transmitter without the receiver in it and they pretty much told me to deal with it

@Strider9655 Год назад

I've got LED lights on CH3 and they're just on constantly, they only flicker a bit when I hit the button. Worked fine on the stock receiver, so this is a bit confusing......

@elusivemite 2 года назад

Hi Mate. Currently running a Gt3c hacked for my moa build but really want independent control of the rear steering. I currently also run front/rear dig. I use the dual rate switches to swap between f/m/r dig. Would I be able to set up something similar with this tx? Struggling to find the answer online.

@ExocagedRC 2 года назад

yeah use the DR button and set that to the rear steer channel, then you can make it momentary or set it to hold where ever you want it to, I think you can then set the ch3 button in the handle to re center it. I haven't done that setup but some have told me they set it up like that

@arceo18 6 лет назад

Hello my friend ! , have a question about the 4w steering , on what channel do you connect the 2 servos ??, on the manual it said that the rear wheel steering servo goes on the 3rd channel , but what if I want to use that 3rd channel button on the radio to turn some lights, it wil mess up with the rear steering ??, Thank You !!

@ExocagedRC 6 лет назад

Use the 3rd channel for rear steering like it says. Use a different channel for lights.

@francecharles3466 4 года назад

Can you make a video using a turnigy sbec showing wiring diagram and with a clear focus on the wiring tnx

@watchurheadrc721 3 года назад

Hi could you do a video with the Flysky gt5 transmitter in a trx4 with the 2speed and differential hooked to it

@ExocagedRC 3 года назад

I think I’ve already done that. I had it in the trx6 as well and that had the same programming.

@haroldbascom5866 3 года назад

I bought this transmitter (FS-GT5) as an upgrade to my flysky fs3b to run my Rovan Gas buggy, but am having extreme difficulties setting up the Dynamite killswitch on it. After setting up the system, it doesn't work. In short, when the car is running and I hit the third channel button (to which the killswitch is hooked), the engine is killed. However, if while the car is runnimg, I turn off the transmitter, the killswitch light stays on and the engine continues running. I realized that I have a dangerous runaway waiting to happen and, as such, grounded my buggy. I contacted the Flysky company for help but I haven't gotten a reply as yet. Can you tell me what's wrong with my setup? I'd appreciate your expertise.

@ExocagedRC 3 года назад

hmmm that's a tough one, have you tried the kill switch on ch4? that's the lever just under the top. It's 3 position. I believe there are programmable failsafes on all channels but I have never had a need to mess with them. That may correct your issue. I have seen a runaway 5th scale and it did not end well. Good on you for grounding it until you have it safe.

@haroldbascom5866 3 года назад

@@ExocagedRC Thanks for your honesty. I'm hoping to hear from the experts at the Flysky company. If I don't, I'll simply purchase another model transmitter that hooks up safely with my killswitch. Thanks for responding so promptly. 👍🏿

@igortxi06 4 года назад

Quick question, on a trx4 do you use the ch5 and 6 for the diff lock.. Just wondering how to trim that. thanks

@marcparent8786 4 года назад

Just set 70 everywhere i did that and it dosent destroy the servo and also my transmission switch is set on 3rd ch

@lepiaf128 4 года назад

Hi the I purchased this Gt5 , I am new to the hobby, the thing is I have no idea to calibrate this GT5 to my rc crawler, it would be great I you had a video to show a basic calibration for a crowler, thanks

@wraptgrafix6338 4 года назад

I have to ask as I've been struggling to get this to work on my capra. Al other 5 rigs hooked up fine but I have no throttle control. have you bound it with your capra and if so was there any issues. Have tried three FS-BS6's and always same result. However i can get throttle when plugged into channel 2, just not in channel 1.

@pbruteforce1 8 месяцев назад

I am using one of these for my vanquish Phoenix and I wanted channel 4 for the transmission to go between the different overdrive settings as well as the two-wheel drive only when I would switch it The middle setting would hardly move is there any way to set the middle so it basically goes halfway in between the total throw?

@ExocagedRC 8 месяцев назад

yeah ch4 subtrim, set that for neutral and then set end points

@camyota 5 лет назад

Sweet, now I dont have to get my gt3 hacked!

@nsvaluto48328 5 лет назад

How did you get your channels buttons to work? I wanted to run lights

@nsvaluto48328 5 лет назад

Aldo can I power a winch from one of the channels with out controller? Thank you for looking my question s

@ExocagedRC 5 лет назад

plug them into the channel you want to use and use the corresponding dial or button. The buttons are not assignable so they are what they are.

@craigpimlott204 Год назад

Channel 3 on the first 3 channels on my fly sky gt5 don’t work ,I’ve swapped 3 of em from three different sellers .all well known sellers in Europe ,and all had non working channel 3 on the first 3 channels .4 onwards work fine .anybody else had this problem ?

@samcoussens 4 года назад

Hi! Can you set up one of the aux channels as a braking channel? To be able to put front and rear brakes on separate channels?

@samcoussens4248 4 года назад

Hey! Is it possible to use an aux channel (3-6) as second brake. To have front- and rear brake on seperate channels?

@diclexicschweb4748 2 года назад

Is there eny way to trim rear steer my sever horn dusnt go on strate

@scottkunkel129 5 лет назад

Hello I just got one of these controllers can I use any of the 3-6 channels to control lights on and off?? Thanks

@ExocagedRC 5 лет назад

Pretty much yeah. Pick the switch or knob you want and plug the light controller into that port on the receiver.

@AngelLopez-xg7wt 4 года назад

By light controller you mean a need to by a remote device not just plug the light into the channel and control it like that?

@STEVOD313 6 лет назад

I did a video on this gt5, didn’t go into detail like this👍👍👊👊📹📹hey I have 4ws n put one servo in channel 1, the other servo into channel 3, when I put in crawl mode the back servo that’s in channel 3 turns my wheels all the way left,when I turn right the wheels just straighten? Then if I hit the channel 3 button it does the same? How do I fix this?

@ExocagedRC 6 лет назад

I haven't found a way to select 4ws mode on the fly, you may need to take the servo horn off and adjust it there, so long as it shows the 4ws it should work, as in the monster truck video showing the 4ws, the gyro will work just the ch1 servo. When I scroll my radio past the off button mine also turns to one side.

@STEVOD313 6 лет назад

Exocaged RC yes when I turned crawl mode off it would go all the way to one side, so I did take servo horn off n straightened on off, then turning crawl mode back on then it would go to one side, so basically if I fix the servo horn on off mode they r straight n turning crawl mode on the tires go to one side n vise versa fix horn in crawl mode then off turns it to one side??? Driving me nuts!lol

@ExocagedRC 6 лет назад

Ok turn 4ws on and set the horn that way. You should be ok at that point to just adjust trim and end points.

@STEVOD313 6 лет назад

Exocaged RC Thanks brother,yea I was thinking that’s the way I should do it, I appreciate u helping me out,thanks again bro👍👊

@beastrcdragracingteam4256 2 года назад

Can you bind it to the rampage truck

@MikeEllis-oo9ke 4 месяца назад

Do you have a video using the fs gt5 running dual esc in a crawler?

@ExocagedRC 4 месяца назад

I don't think it can do that as i havent found any mix there to make that happen

@typer5566 6 лет назад

Can ch5 or ch6 knob assigned to other functions? say like throttle dual rate or steering dual rate? thanks!

@orkiks 5 лет назад

Is all the channel plug and play?

@BROtheBRAWLER 3 года назад

thx for video, does anybody know how to simulate the "trx-4 crusie control funktion" from Tq Radio on this FS GT5 ?

@braddahdussifyoumuss596 3 года назад

I can’t seem to figure out for the life of me how to center my throttle?!? It’s all centered out but my throttle is still weird 🤷🏼‍♂️🤦🏼‍♂️

@lilmoe6657 3 года назад

Can I use this with the crawl mode

@ExocagedRC 3 года назад

Yeah

@WreckinStreetsDaily 3 года назад

Yo how do you reverse steering? Please help I accidentally flipped my steering and can switch it back!

@nsvaluto48328 5 лет назад

Can those channels 5 and 6 work for lights channel 3 too? Does that auto correct steer only work for cars

@ExocagedRC 5 лет назад

Sure they can, you just have knobs to turn to get them on and off. The steering gyro only works on ch1 and I’m not sure why you would want it on anything other than a car

@nsvaluto48328 5 лет назад

Thanks I thought it might I want it for a boat especially when it has no reverse

@ExocagedRC 5 лет назад

A boat, now I gotta say that is an interesting idea. I would imagine the waves lean and stuff may affect its performance for playing around but in a drag boat it may work pretty well.

@nsvaluto48328 5 лет назад

I mainly got it for my three lights I’m running switchable from the transmitter, the stability control would just have been a bonus

@nsvaluto48328 5 лет назад

So far the rudder reactes to the direction of the boat pointing. So the lights should work with ch5 & ch6 with dials is that right?

@67smit 3 года назад

I just pick this up I got 5 cars on it but I can't get the other channels to work like the lights they just stay on no matter what channel it's in how can I get them to go on and off with the other channels

@z0mbiE_ 3 года назад

Just got mine and I’m having the same issue.

@ralphweggum1134 6 лет назад

is it better than rc6gs?

@christopherchristensen3815 5 лет назад

Hey Exocaged I have the Flysky gt5 do you know if the Turnigy receiver work with Flysky version ?

@ExocagedRC 5 лет назад

I’ve tried to bind it to the other receivers and it did not work.

@christopherchristensen3815 5 лет назад

Ok I saw that Turnigy had a FS-BS6 water proof receiver I was thinkin about get one but won’t take a chance thx.

@backyardbasher 5 лет назад

the GT5 TX will work with any "AFHDS 2A" RX , such as the 3ch FlySky FS-A3

@mr.dozer.7471 5 лет назад

Alright here's a question for you buddy I like your video I got a GT5 6 Channel and a Traxxas E-Revo 2.0 brushless I tried every configuration in the world program this thing. I'm sure you know the E-Revo has dual steering servos how do I hook this up

@ExocagedRC 5 лет назад

Mr. Dozer. I too have considered attempting this with dual servos. The only way I can think of is to turn the gyro off, turn on 4ws and simply make both servos travel in the proper direction. This would be on ch3 for the second steering servo, just make sure that the epa and trim match up perfectly. The other way would be to use a servo splitter wire and run them both off one channel.

@mr.dozer.7471 5 лет назад

I heard using a splitter or a y takes way too much power for the servos. I thought about what you said engaging the four wheel steering but I'm confused at what setting I would use in the 4-wheel steering mode. It would be nice if FlySky major receiver that had to channel ones

@ExocagedRC 5 лет назад

Mr. Dozer. Yeah. I have a 4ws video with this radio. You could do that setup but no gyro.

@mr.dozer.7471 5 лет назад

@@ExocagedRC sweet.

@seansrcconstruction 6 лет назад

Do you need to turn one truck off before you can switch to another truck?

@ExocagedRC 6 лет назад

yes

@seansrcconstruction 6 лет назад

Exocaged RC thanks

@OswaldBeef 4 года назад

can you adjust the gyro?

@mikehagquist5198 11 месяцев назад

I bought a gt5 and got it today from Amazon. The rx has no power. No flashing light. Just dead.

@jzy0104 4 года назад

How do you add the 7 and 8 channels

@lepiaf128 4 года назад

I have no idea about to calibrate anything reverse left right up down I have no idea would you be able to run a Full speck on this transmitter for a Crawler. Basically a full set up. I’m sure there’s more than one like me would like to hear that because not everyone knows how to use a translator a gnu to the Hobby so please can you do that so you may get more subscriber to and perhaps me

@dobbersgarage 3 года назад

Will the ch5 and 6 knobs work for a winch, dig or 2speed shifting

@grvtyboyRC 2 года назад

I have the exact same question and cant seem to find the answer anywhere.

@dobbersgarage 2 года назад

@@grvtyboyRC I think they will. I have the gt5 now and I tried using channel 5 and 6 knobs for rear steering and it worked ok. So I think they would move a winch, dig or 2 speed shifting servos just fine. The rotating knobs might be trickier to use then preset buttons but I think it would work.

@grvtyboyRC 2 года назад

So I have the 2 winches (front and rear) assiged to ch5&ch6 and it works fine. Defintely harder to control then a 3 position switch but gets the job done. I also setvthe failsafe on the gt5 so the channels always start in the neutral position so when i turn on the tx and the esc the servo is stopped.

@dennis586 4 года назад

what do you do if steering and drive is in reverse how do you fix that

@ExocagedRC 4 года назад

Reverse ch1 and ch2

@matthewrein6913 4 года назад

Any way you could help me set up a winch with this transmitter? I cant figure it out.

@ExocagedRC 4 года назад

I think it’s Ch4. The toggle switch thing. Put your winch controller into that channel on the receiver and it should work. You must have a controller like an esc to work the winch

@matthewrein6913 4 года назад

@@ExocagedRC i did that and nothing happened someone said its the dual rate or the trim or the endpoint but im not sure how to work this transmittter

@ExocagedRC 4 года назад

matthew rein you can scroll on the screen and see a bar graph showing what the channels are doing. Flip that switch and see if the bar changes for that channel.

@matthewrein6913 4 года назад

@@ExocagedRC thank you sir. The dual rates where maxed on it i turned them both down to 50% up and 50% down and works like a charm thank you

@rczone9830 6 лет назад

Can we use that FS-GR3E 3ch rx with this transmitter?

@backyardbasher 5 лет назад

the GT5 TX will work with any "AFHDS 2A" RX , such as the 3ch FlySky FS-A3

@animalrc5102 5 лет назад

Can you make a video on how to set it up for a winch I have a rc 4wd winch and it is direct to the receiver and when I plug it in it continues to run even tho channel 4 is set to off

@ExocagedRC 5 лет назад

You must have a controller for the winch. If there is no controller it will do like yours is doing.

@animalrc5102 5 лет назад

Do you have one that works that I can link to my controller or will it work once I add it

@ExocagedRC 5 лет назад

I use a hobbywing 1060 esc as a winch controller. I have a video on it, check the channel it’s fairly recent.

@hobbywoodcreative6709 4 года назад

trx4 installing video please

@sd_rcfanatic157 5 лет назад

What’s your svc setting on UDR?

@ExocagedRC 5 лет назад

Derek E depends on the servo. I think mine is around 30

@dhstube 6 лет назад

Is possible to swap chanel 5 and 6 rotary switch for a 2 position switch?

@ExocagedRC 6 лет назад

I don’t know but that would make them work better for diff locks and stuff.

@dhstube 6 лет назад

Mmm, your next video?

@ExocagedRC 6 лет назад

I doubt it, it’s still new enough to have a warranty. LoL.

@imemovengeance 6 лет назад

Iyo would you replace the TQi 5 channel radio with this or anything really.

@ExocagedRC 6 лет назад

In the trx4 I'd replace with a Hacked 8ch GT3c radio without question. I have 3 on order to hack and setup.

@imemovengeance 6 лет назад

Exocaged RC Will you do a video on the hacking? I've heard it mentioned but I don't know why you do it.

@John-xk7uo 6 лет назад

What’s the benefit of changing radios?

@ExocagedRC 6 лет назад

Hacking a GT3c gets you 8ch along with more mixing, epas the best 4ws options available on any radio and it’s just more versatile. Receivers are under $20 so that’s a big bonus as the radio can hold 63 models. I have a video showing the setup I use for most TRX4 trucks however I have a few setups for various user needs. One of the benefits of changing radios is you get more options. With my 6ch setup you get independent control over everything the TRX4 has. You also get a winch or a light Chanel. With my 8ch setup you have two more channels for more lights if you want. I can also do 4ws on a trx and give you full function of the truck plus winch and lights.

@imemovengeance 6 лет назад

Wow I see the benefits! I'll order order one now. Thanks

@rczone9830 6 лет назад

Will you suggest me 3 or 4 ch rx with that tx ??

@ExocagedRC 6 лет назад

it comes with a 6ch and its the only one available for it as far as I know.

@backyardbasher 5 лет назад

@@ExocagedRC the GT5 TX will work with any "AFHDS 2A" RX , such as the 3ch FlySky FS-A3

@hanschan1478 5 лет назад

left out channel mixing man , Bet you cannot find it

@ExocagedRC 5 лет назад

I’ve never even tried to mix anything on it other than turning on the 4ws.

@justinferreira2887 5 лет назад

My channel 3 doesn't work and when I plug my winch into anyof the channels it turns on but won't shit off unless I unplug battery can u please help me

@ExocagedRC 5 лет назад

What are you running on ch3?

@justinferreira2887 5 лет назад

I got the winch to work but I can't get channel 3 to work I have it on a servo for high speed low speed on trx4 I can't figure it out

@ExocagedRC 5 лет назад

Try a different servo in that port. One that’s not connected and see if you can get any action

@justinferreira2887 5 лет назад

@@ExocagedRC what do u mean by one that is not connected . I've tried all the servos on it an nothing , do u mean try it with the servo not connected to the high low speed cable

@justinferreira2887 5 лет назад

Do I mess with the trim on the subtrim an trim modes for aux Chan 3?

@davidetzel3345 4 года назад

On the fly sky gt5 I need the three position switch to run a novack duel motor esc & dig it say to use channel 3 but on the gt5 the three position switch is channel 4 can I move the wire on the reciver to channel 4 for the 3 position switch? Or can I change the channel 4 to channel 3 on the transmitter can you rename it to channel 4 to 3?