Turning my Honda Shadow 750 into a BOBBER in UNDER 25 MINUTES! | SUPERCUT

Подписаться 2,6 тыс.

Просмотров 47 тыс.

50% 1

Remember when I turned my 2008 Honda Shadow 750 Aero into a BOBBER/CHOPPER? Watch transformation all in one place!
Let me know your thoughts in the comments! Thanks for watching!
Instagram: / luckyacesriding
"Feelin' Good" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons.org/licenses/b...
As an Amazon Associate I earn from qualifying purchases.
*Disclaimer: This video description contains affiliate links. That means that I am awarded a small commission for purchases made through them, at no added cost for you.
Cameras & Gear:
Insta360: amzn.to/3qxphrv
Camera: amzn.to/43KTFN5
Audio: amzn.to/3qntzkS
Mic: amzn.to/3P0GCTJ
Clamp Mount: amzn.to/3qr4PZ3
Stick: amzn.to/3Cenwlg amzn.to/3qzOgtT
STEAL MY LOOK!
Jackets:
amzn.to/3MUOweD
amzn.to/3qmy7be
amzn.to/42nCO1L
amzn.to/3J05oj9
Gloves:
amzn.to/3oRmKYw
amzn.to/3MUOyTN
Helmets:
amzn.to/43pJWMl
amzn.to/3Nr6WFz
Bluetooth Headset: amzn.to/43r8Ew5
Boots: amzn.to/43J1N0G
Backpack: amzn.to/3IZFITE
Helmet Wall Mount: amzn.to/3NjHthe
The Bike:
Ape Hangers: amzn.to/3NeiGLl
Clutch Cable: amzn.to/45R8aAL
Intake: amzn.to/3qspWKC
Carburetor Jets: amzn.to/3qw6QDq
Seat: amzn.to/42thibW
Seat Cushion: amzn.to/43J7604
Sissy Bar: amzn.to/45PMOE0
Windshield: amzn.to/3WTGLdy
Windshield Mounts: amzn.to/43rpzyy
Mirrors: amzn.to/45OIvsF
Small Mirrors: amzn.to/43payxl
Floorboard Adapters: amzn.to/3P2DZAL
Floorboards: amzn.to/3P0VVfg
Grips: amzn.to/45RvRJl
Levers: amzn.to/3MTOUtY
Saddlebags: amzn.to/3MXI5Yn amzn.to/3NhO63y
Tachometer: amzn.to/43pU3B6
Voltmeter: amzn.to/3P0FQpM
Phone Mount: amzn.to/43qypN7
Fork Extensions: amzn.to/43E50yM
Strap stuff down: amzn.to/43rPl5O
Cup Holder: amzn.to/3J2q0aq
Chain Clean Kit: amzn.to/43MpqFK
Tank Straps: amzn.to/3NeNvj4

Авто/Мото

Опубликовано:

30 мар 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 80

@xxYFKxx 14 минут назад

Man I love your content on the honda shadow! It’s crazy because when I brought my honda shadow, I’m starting to realize that my shadow has been converted to a bobber 😅 I didn’t noticed it until I started watching your videos! Keep up the content bro.

@goodgamebro_ 2 дня назад

18:53 i wasnt expecting tht 😭😭😂😂 but good shit 😂

@LuckyAcesRiding 2 дня назад

In its own stand alone video it got flagged as "not suitable for advertisers", go figure 😆

@belindarubio7315 2 месяца назад

You make it look easy. Great explanations and camera angles. Thanks!

@LuckyAcesRiding 2 месяца назад

Thank you! The biggest hurdle to overcome is cutting the frame. Everything after that is easy mainly because you don't have a choice but to finish 😂

@bryanlawrence3389 10 дней назад

Good job working on your gut!!! Keep it up buddy🎉

@LuckyAcesRiding 9 дней назад

Thanks friend! Jan 2022 I was about 280lbs and got down to 205lbs by July 2022. Currently sitting around 230-235. I'm right about 6' and at 205 I had people say I was too skinny. If I can get back down to 220 or so I'll be happy.

@Lucky13Roadkill 18 дней назад

Nice job👍looks much better👌

@Anubi55 2 месяца назад

If you like the Mustang seat, just try the ultimate seat, a very different story, especially with the back rest, I could ride my aero for hours!

@LuckyAcesRiding 2 месяца назад

Anything over the stock seat in an improvement!

@meandmyshadow7839 2 месяца назад

Excellent work my friend.

@LuckyAcesRiding 2 месяца назад

Thank you!

@Shadowbobber208 2 месяца назад

Need to get my build documented, got something very similar going. I did the solid struts in the rear though. Good looking bike!

@LuckyAcesRiding 2 месяца назад

I have a kit from Chopper Supply LLC which includes 8" over forks and new triples to rake the front an additional 14 degrees. Once that goes on I was thinking of giving hard struts a try.

@saltysnoopy Месяц назад

I chopped out an '84 VT700 including a 40 degree rack.

@DeniedClimax 2 месяца назад

Awesome content, awesome commentary, awesome video! Both entertaining and informative. Final product is beautiful!

@LuckyAcesRiding 2 месяца назад

Thank you friend!

@yertelt5570 24 дня назад

Cool mod. I have a 98 750 ACE, I'd have to use a slightly different wire management strategy as I have a chain drive and I don't think a wire zip tied to the chain would end well. lol

@LuckyAcesRiding 19 дней назад

I mean it would briefly work 🤣 but yeah, the swing arm would probably be best.

@phillyblazen1736 24 дня назад

I’m a superbike guy but I gotta say, your build…it looks amazing my friend 💪🏽💪🏽💪🏽

@LuckyAcesRiding 19 дней назад

Thanks friend! Ride safe!

@Medes06 21 день назад

I love it, and I don't get when people say they want bigger bikes, 750 cc looks great to me for the city or around.

@LuckyAcesRiding 19 дней назад

Wanting a bigger bike beyond a 750 is, in my opinion, more about chasing that "new rider thrill" than actually needing more power.

@Medes06 19 дней назад

@@LuckyAcesRiding agree 100 %.

@coryarlof6368 2 месяца назад

very informative. do you have a gas tac or some sort of reader for it?

@LuckyAcesRiding 2 месяца назад

I added a tachometer and voltmeter to the bike.

@coryarlof6368 2 месяца назад

lol i forgot to add a part. do you have a tac or anything for reading your fuel level in your tank? @@LuckyAcesRiding

@LuckyAcesRiding 2 месяца назад

@@coryarlof6368 No I just go based off the tripometer. Usually once I hit 100 miles I start looking for a gas station.

@marianoconde1118 Месяц назад

Nice one! Y Do you have the link for the same rear fender kit?

@LuckyAcesRiding Месяц назад

Got it from bluecollarbobbers.com/

@666foolycooly 4 дня назад

Do you have a link for front turn signals? Nice bike 👍🏽

@LuckyAcesRiding 2 дня назад

Got them here --> amzn.to/3RwGjAy

@deonteb1624 Месяц назад

Did the blinkers come with the parts you used for connecting the wires

@LuckyAcesRiding Месяц назад

No, they were just the lights themselves.

@isaiahandersen9269 Месяц назад

Great looking build, I am planning on doing something similar on my 05 shadow aero and this was a great visualization of what it could look like! That spring seat you used looks quite nice, could you tell me what seat it is, and do you find it comfortable?

@LuckyAcesRiding Месяц назад

The seat is from Blue Collar Bobbers. It is not as comfortable as the stock seat but for that style it is pretty decent. Trust me though, after about 2 hours I'm ready to get off and stretch my legs.

@isaiahandersen9269 Месяц назад

@@LuckyAcesRiding thanks! I plan to take longer rides so maybe this seat isn't for me.

@LuckyAcesRiding Месяц назад

@@isaiahandersen9269 If you plan on longer trips the Mustang Seat is what you are after. Pricy but 100% worth it!

@rickeyuson2731 2 месяца назад

What size apes? I picked up some Amazon special ones in 10in but I have 1 inch risers. How far could I push these wires without getting extended ones

@LuckyAcesRiding 2 месяца назад

On your Spirit I'm not sure. On my Aero I went with 12" apes (wider ones) using the factory 2" risers and only had to replace the clutch cable. I know as far as the Aeros go 10" bars work fine with a little re-routing of the stock cables.

@GenXPertChannel Месяц назад

Making it what you want is part of the fun of having a bike. I'm trying to make my Spirit look more like an ACE... you wouldn't happen to want to sell your original rear fender and the associated chrome bits etc would you? I think I'll do an ACE rear end, leave my Spirit large front wheel in place- then do some passing lights- kind of a strange mix of ACE and Spirit.

@LuckyAcesRiding Месяц назад

Before I bobbed mine out I ran a Spirit front fender for a while. The large rear Aero fender just looked odd. Also I really don't want the hassle of trying to ship the rear and have no idea if it will even bolt up.

@rickymckim4480 2 месяца назад

I might try this

@LuckyAcesRiding 2 месяца назад

Just make sure you 100% want to because once the frame it cut there is no going back.

@berniesavard5146 20 дней назад

You should try Black Chrome that would make I pop

@LuckyAcesRiding 19 дней назад

Anything to get rid of the shiny stuff lol! Plans to black out the whole bike have unfortunately been put on hold.

@CodyVenturelli-gg2dp 26 дней назад

What struts did you end up putting on? And what lowering struts did you have?

@LuckyAcesRiding 19 дней назад

I have not installed the struts yet. The original cheap set from Amazon did not fit but I have another set (also from Amazon) that look like they might work without drilling out the mounting holes.

@dovid916 2 месяца назад

curious as to why you crimped connectors vs just soldering them

@LuckyAcesRiding 2 месяца назад

Working with what I had at the time. Just wanted the project done.

@dovid916 2 месяца назад

@@LuckyAcesRiding Gotcha, especially if it was a hot day out!

@LuckyAcesRiding 2 месяца назад

@@dovid916 It was pretty hot and I did the rear fender right before that so we are talking a few hours. I keep telling myself I need to go back and re-do they but everything still works so I'm not too worried about it.

@BTone-wv5hc 21 день назад

Where did u get the kit? I have a 2006

@LuckyAcesRiding 19 дней назад

The fenders and seat all came from BlueCollarBobbers. The signal lights, tail light, and license plate bracket all came from Amazon.

@andystyles6967 2 месяца назад

What is your handlebars set up?

@LuckyAcesRiding Месяц назад

12" ape hangers from J&P cycles, factory Honda risers.

@michaelmoran4941 Месяц назад

Could anyone PLEASE help me find white walls like these for my 2007 Honda shadow 750 aero

@LuckyAcesRiding Месяц назад

They are Shinko 777, the front size you can find exact but the rear you have to go with a 170/80B15

@Feareduser 2 месяца назад

What size bars?

@LuckyAcesRiding 2 месяца назад

They are 12" apes from J&P Cycles.

@davidmurray9193 24 дня назад

Would it not of been cheeper to cut the old mudguard down to the shape you wanted?, nice turn out all the same

@LuckyAcesRiding 19 дней назад

If I were to do it again I probably would have just done that and run the Mustang seat. I really like the small fender look though.

@jacewilliams6919 22 дня назад

I'm a Harley Davidson guy

@LuckyAcesRiding 19 дней назад

Regardless of manufacturer I hope you found the perfect bike for you! Ride safe!

@devan1635 9 дней назад

Just needs a smaller tank and it will look perfect.

@LuckyAcesRiding 8 дней назад

Man I am so on the fence about it, especially with the longer forks and rake kit on it now. I do love the stock 3.7 gallon capacity though!

@marcinkalinski308 24 дня назад

Cool, but why?

@LuckyAcesRiding 19 дней назад

Because cool and I can't leave things well enough alone.

@nigelcowles3626 26 дней назад

So you've taken a clean factory good looking bike and turned it into a bike that looks like it's been binned and put back on the road in a shed. Bravo

@shearcull 7 часов назад

Learn to understand why they are made and then make assumptions.

@jordyhermes1683 24 дня назад

That aint no bobber.. a real bobber has no rear suspension 😂 non the less nice work

@SickDayFishing262 20 дней назад

They can have rear suspension. Bobbing originated as a customization style, not a model.

@LuckyAcesRiding 19 дней назад

Future plans friend, future plans.

@eccentricsmithy2746 13 дней назад

And at the end of the day its still a worthless Honda. Besides, how is this a chopper? A chopper is a bike put together with parts from other makes and models to make a complete rideable bike. This is just a stripped down honda with no other parts from any other motorcycle manufacture.