ULTIMATE MOPED BUILD FIRST START! Puch MAXI 64cc 

somebody give this man a derbi or am6 engine 🔥🔥🔥🔥🔥🔥🔥

The dog looks super excited to see the bike run 😂

That was a nice video. In the Netherlands they speak Puch out like ´ Poogh ´. Back in the days i had the same Polini 65cc cilinder , it was a wild cilinder i remember.

Kinda been waiting to see this.... It looks like it's going to be a ripper

Loud..is good. More Power!! U will get it. Right mr mop. Great job. Old man mop

Wooooo! Keep it up man! Thanks for the shout out! Get a fork brace on that bad boy. The polini e50 is such a great build. This is going to RIPPPPPP

Tomos gang Puch gang big wheel gang

Ryan built my pipe and intake for my Tomos, He's the man!!

Lookin and soundin mean!

Give this man a Yamaha Aerox 70cc

When adjusting ignition points it's not ideal to judge opening by looks. You can make a simple light or a buzz box that will tell you when the points are actually open. If you don't want to do that, you can use a cigarette pack cellophane. You take a small piece of cellophane and place it between the point contacts (when they are fully closed). Pull on the cellophane very lightly as you slowly rotate the flywheel with your other hand. When the points release the cellophane is when they are open. You can also use a matchbook cover as a feeler gauge to set the point gap (it's approximate correct thickness). Also, make sure you adjust the point gap before you adjust the timing/firing position, as making the gap larger or smaller affects when the points open

sounds so sickkk

Yes a Temp gauge on a AIR cooled cilinder make Total sense. And nice PUCH Greetz from the Nederlands

yo sick vid man maybe get a race ignition it help a loth with take off here in the Netherlands we use them a lot on puch and Tomos

Insane build fasho wow soooo tough💪🏼😤

yessir minty builds

Finally!, have been waiting for this video for a long time :)

Amazing video my man 💯💯💯

I had an old Puch back in 1978. Had a blast with it. Wish I had it now.

Such a nice bike sounds great... can't wait to see u mobbin on it

i've always wanted a puch man. love the 2 stroke sound

love it, miss times of puch maxi

Good job sounds awesome 👌

I always like to give a little fun fact: My dad was top salesman for a company in Southern California ..Placentia California to be exact and the company he worked for was called SportMag2 and they manufactured mag wheels mostly for mopeds. They also made wheels for motorcycles , sandrails, and BMX bikes. My mom's little sister was probably 14 or 15 at the time and she got hooked up with magwheels for her Puch and got to be on the cover of one of their catalogs. My dad ended up becoming a partner & one day in probably 1980 the dude Larry (the CEO) called his 20 year old son to the shop and my dad too and as the 3 of them were talking in Larry's office...Larry excused himself to go use the restroom in the machine shop and that's when my dad and Larry's son heard a gunshot. Larry took his own life in the restroom and he used a gun that he (Larry) manufactured himself. He was known to have been a gunsmith and sold some blueprints to Smith and Wesson .. I think this took place on july 20th 1980 or 82..... Ruined some families and the business since he was the main owner and CEO....his wife sold it off and my dad and the other partner pretty much got screwd. The worst thing is that he wanted his son there when he did it for unknown reasons. Dick

Clean build

Nice video guys! 🔥🔥

Nice work

sick Stuff guys :)

Cool moped😊👍🎖

Am6 derbi will be a nice build series man hope youll do it in the future

sickkkkk

Also with the flat plate behind the spring plate it will compress the spring plate further and make it hold harder

i used the 64cc polini kit been on there with a 16mm carb hits around 47 mph with a techno expansion pipe and open air cleaner

I had this puch back in 2001, 80cc was going 100kmH

Exhaust is wild 😂👌

Oh also a hpi ignition would prob help you more than anything. The mini rotor. Best of luck to you ✌🏻

My 78 puch maxi is basically a ratrodded version of yours. Its fucking awesome!

I would get a small airfilter. And change the ignition. But a sweet ride.. Had a few as a kid

You may want to do a ktm clutch swap to do wheelies very well. And you want a smaller main gear on the case.

Tuned my moped with an 69ccm engine 😈😈😈

boys in Denmark love mopeds but the mopeds in the us is much more different cuz in Denmark they ride like pgo hot 50, Yamaha jog r, jog as/fs or puch maxi and I just think if the mopeds some boys make in Denmark would blow away Americans (almost every moped can go 170 km/t and its supposed to only go 30 km/t so if u cold make a really fast maybe jog as (the jog u already have) I would enjoy watching. thanks.😁😁

But you def want to use the softest springs you have. Bc you want them to engage quickly. Stiff springs don’t engage till you’re higher in the rpm’s.

That's a nice Puch Maxi! I'm new to this channel but have you already had a yamaha aerox, gilera runner or Aprilia SR? They were and probably still are THE sh*t in my country. For mopeds my suggestions are Citta, Tomos and Vespa/piaggio ciao. My dad owned a Kreidler and a Zundapp in his youth, also very cool small engine bikes to check out 👍

God did

It might like more timing like 30°

Man I fckin hope I get this new job I’m going for my streetmate got left out in the rain gotta get a few new things nothing crazy just tune up, front rotor rubs (new brake party from treats) new pedals and blinkers or just delete. I need to get er up and running

this dude is hilarious man. you must annoy the hell out of the neighbours with your projects LOL I couldn't stop laughing watching you ride that puch, it's sooooo loud LOOOOOL

The clutch needs the flat plate against it on the outside of the clutch will wear out if the spring plate is riding against it

pls put the light in the middle it will look much better

More timing will also cool down the exhaust bc more fuel will burn in the cylinder and not in the pipe

build the piaggio ciao bro🔥🔥🔥🔥

64 Cc good🎉🎉🎉🎉🎉🎉

Would be insane to see you build a Gilera Runner 180cc. Probably hard for you to get one though.

Where did you get the EBR forks for your blue prebug? Direct from EBR?

the clutch must be dry then?

👍🏻

Consider a hpi or mvt ignition. Alot lighter flywheel :)

buy a MVT ignition it ads a lot more power and more

Exaust name ? Or type

should have gone with the 74cc and hpi or mvt ignition

You should have a few C Cs of Castrol 2 stroke oil into the barral , then put the plug in , that cylinder was bone dry .

SHOULD HAVE FOLDING FOOTPEGS AND PUT IN UP POSITION STARTING SOMEONES TOOK OFF SHOVED POLE THROUGH MANY PEGS AVAILABLE STANDARD TO CUSTOM ON EBAY ALONE

50.1 oil ratio

A little late to the party but. Sound like the clutch is kicking in too early. Might need some stiffer springs. It'll help a lot with acceleration, since the engine doesn't have any downlow power. You also might have to retard the timing to 14-16 deg before TDC, other with you'll overheat and seize the cylinder.

Give this man a simson s51 or a yamaha jog r

take your safety sliders off it,ll kick first time

All Stores Please Lower the price of all Military and Local for all Brands of Moped Products and Accessories and Production Cost Now That's too much $$ The Whole World Now 🙏🙏🙏

All Stores Please Lower the price of all Military and Local for all Brands of Moped Products and Accessories and Production Cost Now That's too much $$ The Whole World Now 🙏 🙏🙏

That’s like the worst cable routing for the throttle, but sick bike otherwise!

I have 2 of these ! Anyone need parts ? lol one came with a full rebuilt bottom end on the motor i wanna put a pipe on one

I don’t think you should of left that clutch in oil it’s a dry clutch isn’t it

Swiss 14yo laughing in 74cc italkit

Buy a SYM Mio 50-100cc

Wheelies on a maxi I want to see this.. video or it's not real.

Lmao thats a 2 stroke power exhaust lmafao

Puch not pooch

Who tf soak’s his clutch in oil

first

"So deep and so long", "everything is rubbing "!!!

God did