Umarex Gauntlet .25 "57" FPE, Easy Upgrade by Airgun Detectives

Подписаться 54 тыс.

Просмотров 22 тыс.

50% 1

The Original Umarex Gauntlet .25 PCP Air Rifle. We show you the easy steps to produce "57" (FPE) Foot Pounds of Energy. #staytunedforairgundetectives
*Note all airgun demonstrations and displays are conducted in a safe environment, on a range, specifically designed for "Airguns"
"NEW" AGD Hats airgundetectives.com/product-...
Airgun Detectives airgundetectives.com/
Gen-2 Bipod Kit airgundetectives.com/product/...
AGD T-Shirts airgundetectives.com/product-...
BUCK-RAIL WEBSITE buck-rail.com/?aff=3
(As an Amazon Associate AGD earn a small commission from qualifying purchases which helps support the channel, and cost you nothing, Thank You!)
Umarex Gauntlet amzn.to/46D5kir
H&N .25 Cal FTT: amzn.to/3L2kMdb
Lyman Trigger Gage amzn.to/3zxmzlP
Lyman Shooting Bag amzn.to/2TLJt8B
Lyman Match Bag and Jack amzn.to/3xuDGCO
Splatterburst Targets amzn.to/3zKrNcX
DISCLAIMER: This video is meant for educational & documentary purposes only. All work on airguns and airgun accessories should be carried out by a proficient licensed professional. Airgun Detectives Channel nor RU-vid will be held liable for any injury or damage resulting from attempting to duplicate anything shown in this video. Airgun Detectives Channel is not a store. We do not sell airguns, airgun parts, or airgun equipment directly from this viewing channel. By viewing this video, you are acknowledging the contents of this disclaimer.

Спорт

Опубликовано:

14 апр 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 99

@justdre2 3 месяца назад

Great information, I just upgraded my original Gauntlet .25 per your instructions and it works great again. Also ordered the Buck- Rail can for my Gauntlet .30 its much quieter can't beat the quality for 40 bucks. Thanks for the great video and information sir!!!

@AirgunDetectives 3 месяца назад

I appreciate you watching! Happy Shooting 👍🏻😉

@georgegandara6054 2 года назад

Every new review i get more amazed with new technologies,thanks JC

@AirgunDetectives 2 года назад

George, thanks for tuning in and Happy Easter 👍

@Thaib0xer69 2 года назад

JC, the Gauntlet is a powerhouse of an air rifle. Excellent video and Gauntlet mod guidance!!!! Send it!!!!

@AirgunDetectives 2 года назад

Hey Buddy, I really appreciate you watching and thank you for the comments! Happy Shooting 👍

@nlmeireles5109 2 года назад

Hi JC , Great video as always my friend, nice upgrades. Happy Easter to all the Airgun Detectives family. Cheers

@AirgunDetectives 2 года назад

Hey Buddy, Happy Easter! How are all the four-legged children? I hope all is good!

@A.Loppstirr 2 года назад

Now you see, the intro. That’s a good friend right there, you could tell he was feeling that badass role and he took it past the 100 yard line in the intro, so cool. I’m going to edit this comment once I’m done the vid as well🙏🏻 Edit: awesome vid as always my friend. Funny story, just last night a good buddy of mine recommended this exact rifle for my first pcp airgun. Not even 12 hours later, I get home from work, check your page to see what you’ve got going on, and there she was, a whole vid AND extra mods for the exact same beauty. Just a funny coincidence and a good way to come home after work🙏🏻👍🏽 you’re the man JC, I love this stuff

@AirgunDetectives 2 года назад

I really appreciate you watching! I guess timing is everything. I did do a full review on both the .22 and .25 Gauntlet awhile back. Check that out if you haven't already. That was "Max" aka "Fat Bat" enjoying that CAO in the intro. Hopefully we'll see a bit more of him in the future. The .25 Gauntlet is a fun rifle and extremely accurate. I also did some trigger work on that one. Again, thank you for the comments. Happy Shooting 👍

@abitoutside 2 года назад

Great video as always brother

@AirgunDetectives 2 года назад

Hey Brother nice to see you back👍😉

@Light_357 2 года назад

Thanks for not linking the upgraded products in the description. Would have really sucked if you had.

@PeterAgostiniJdcap26 2 года назад

Thanks for the tips JC good topic 😎👍🏻

@AirgunDetectives 2 года назад

Peter, thank you for watching and I appreciate you leaving comments 👍

@amadomata459 2 года назад

Great videos. Happy Easter to you .

@AirgunDetectives 2 года назад

Thanks for tuning in and I hope you had an outstanding Easter 👍

@steve6000 2 года назад

Great topic. I bought my upgrades through Hajimoto. He has the regulars set up by caliber. I also have the Buck Rail supressors. Yes, they work excellent! I think they were under 20. Great video. Happy Easter

@AirgunDetectives 2 года назад

Steve, Happy Easter! Sounds like you have a great setup. Happy Shooting 👍

@pjford5254 2 года назад

Great Lesson as always thanks............

@AirgunDetectives 2 года назад

PJ, thanks for watching and I appreciate your support 👍

@jp_9732 2 года назад

Great informative video JC. I am planning on doing this to my 25 gauntlet gen 1 as well. I couldn’t help but notice you have the same issue as everyone else with the pellet probe being stiff going into the barrel. I found out if you chamfer and polish the breech end of the barrel it will help a lot. I am also planning on doing that as well. 🤙🏼😎

@AirgunDetectives 2 года назад

JP..thank you for watching. The rifle does have a heavy bolt that is for sure. Are am sure that would help. I also don't have but a handful of rounds through this rifle. I think more rounds may help it smooth out as well.😉👍

@JonR35 2 года назад

My .25 origin did 72fpe! Nuts

@AirgunDetectives 2 года назад

Now that is some serious energy 👏

@slidelltowne183 7 месяцев назад

My 25 cal shoots great with stock bottle, avg 48 ft/lbs with the 25.39 kings. So I swapped to the bigger (TRUE) 1900 psi Reg and tank for more shot count. Sound of screeching brakes! Now I get less speed and FT/lbs, avg 860 at 42 ft/lbs. These rifles are definitely like a box of chocolates, no? Turns out my original tank is only 1700 psi with repeated advice to set up hammer spring for new pressures. Another site reported owners tanks are all over the map 1700 - 2000 psi. Heck, I'll just jam 2200 psi and see what comes out? Cheers.

@FirstStateAirgun 2 года назад

Great video as always very informational I don't do too much tinkering but this is super easy thank you

@AirgunDetectives 2 года назад

I appreciate you constant support and comments as always! Happy Shooting 👍

@OGs4OGs 10 месяцев назад

Yeah most his videos are expect this one, not tagging the link so we can get this upgrade, why would he post a video about an upgrade but doesn't show us where we can get it? Also he says for under $100, I'd like to see where. All I can find is $189 plus for a bottle like that with set reg for 2100psi output pressure.

@robertmorgan4691 Год назад

Different spring washer configuration will add or decrease FPE. Write down as As found and any changes. Spring washers come in different materials and thickness.

@stevengoodman3498 Год назад

Great one JC. Do you have an exact link on that regulator? That's all I'm missing to upgrade mine. Any help would be appreciated. Have a great day!

@guitarmage0072 3 месяца назад

Hi AGD, Thanks for all this great info! Is the 5/8 x 18 UNF the thread size for the bottle or the thread size for the part that screws into the gun?

@rellmonger7935 Год назад

Kool, do 1 for the Gauntlet 2. 25

@secretamericayoutubechanne2961 Год назад

Mine started leaking air. And it was the O rings. An airgun Smith can change them out for 2 bucks

@josemota9102 Год назад

Could you leave the description of the aftermarket items

@robertmorgan4691 Год назад

Adding shims behind hammer is another mod. You'll only add to many once. You'll know it when you screw in the bottle You'll hear the air releasing.

@wisdomoverfear2685 8 месяцев назад

Got my Guantlet .25 and after watching youd video I got the bigger upgraded tank and regulator set at 2200 psi. The tank says it's safe to fill up to 4,500 psi . Since its a regulated shot....is it safe to fill it to say between 3800-4000 psi and wouldn't this give me more shots per fill ? So far ive only filled it up to 3200 psi ....it will go through a 1" thick board with no problem !!!! (and right through my wifes flowerpot that she won't be happy about)

@CrappieJunky 8 месяцев назад

How did you put that bipod on?! That’s exactly what I wanted to do with my air pew pew!

@yatox8 Месяц назад

Any regulator suggestions for a Gauntlet .30 carbon fiber bottle (M18x1.5 bottle thread)? Chinese online ones didn't work out for me, they can't really do the 3000psi output well, just leaked. The gauntlets block threads are G1/2 14 so that is well universal with most regulators I've found, it's just the darn depression pin type on regs I can't seem to find a proper one that the gauntlet can push in right.

@asoasotriadio Год назад

How about the gauntlet 2? Which already has a bigger cc bottle?

@10ring60-bp5ml 8 месяцев назад

thanks

@iziploci Год назад

Can someone link where to buy the regulator. I can’t find it anywhere

@archermanbob 2 года назад

Why look down scope if you do not flip the scope caps open ?

@brorjordas1979 2 года назад

Can't you go and change the hammer spring to a harder one? Or at least on the .177 or .22 - if upping the og regulator or installing a complete airtank set with new reg completely? Though... This truly is the "easy" as mentioned in the video title.

@AirgunDetectives 2 года назад

I am sure there is a way but that would be the key to increasing the power. Imagine the velocity you could get out of the .22 caliber with a heavier hammer spring and a 2200 psi regulator. The key is finding a spring and then replacing it. Sounds like a project for Bror!😉👍

@brorjordas1979 2 года назад

@@AirgunDetectives 😂👍🏻 First I'd just need to find my Gauntlet. I think it looked just amazing the first time round already.. And then came the G2 and stepped it up even some more (even though I think I prefer the looks/design of the G1 a bit more than the G2. But way nice either way imo.

@stevengoodman3498 Год назад

Hey JC. I have a longer bottle and regulator I would like to try on mine. But it's output is set at 1800psi. Will the rifle still fire at this pressure or should I just order another regulator? Thank you!

@AirgunDetectives Год назад

Hi Steve, I assume you a referring to a .25 caliber rifle? The 1800 psi will work but the rifle will have less FPS/FPE since the stock regulator is 1900 PSI. That 1800 psi will not work on a .177 or .22 caliber Gauntlet because of the softer hammer spring. The max you should go on the .25 caliber is 2200 psi. Happy Shooting!

@stevengoodman3498 11 месяцев назад

Hi JC, i ordered the buckrail moderator for my gauntlet gen 1 25 cal like in your video. Do i just screw the unit in without anything else? Or is there a spring that goes in first? The moderator from terry didnt come with one but i have the original parts that came installed in the rifle. Thank you!

@AirgunDetectives 11 месяцев назад

I believe the Buck-Rail comes with an insert attached to the suppressor. Double check with Terry. I no longer have mine, and I can't remember for sure😔😉👌🏼

@stevengoodman3498 11 месяцев назад

Thanks for the reply JC. I'll check with Terry before I screw it in. Appreciate it!

@joznew1 2 года назад

Hey friend can you test a 2800psi output reg for this .25? The new 30cal has a 2800psi reg on it. Can the gen 1 25cal take the 2800psi pressure?

@AirgunDetectives Год назад

In order to go with that type of Reg you would need a heavier hammer spring.

@DheerajNagpal 2 года назад

Could I use the existing regulator with new can and get a higher shot count or is there an issue with that?

@steve6000 2 года назад

Yes, you can

@AirgunDetectives 2 года назад

Yes...you just need to determine the tank thread on the stock regulator and match that. Those stock regs are really on the bottle extremely tight. But you could definitely do that.👍

@saschawomack1163 Год назад

what is the output pressure of these regulators? I see 4500, 3000, etc. but they all have 800psi output.

@AirgunDetectives Год назад

The out-put pressure varies. You have the rated pressure value, 3000-4500 psi, but you need the proper output pressure.. ie.2200 psi

@davidlennox9892 2 года назад

What thread size is needed on regulator to fit in Gauntlet? Understand 5/8"-18UNF for reg to bottle, what thread is other end? Also, can only find regs with gauge and foster fitting at 90 degree setting, can regs be changed to have gauge and foster in direct line, as required for this application, or is a special reg required? Thanks

@AirgunDetectives 2 года назад

David, that is the standard paintball thread G1/2-14. As far as the regulator you have to make sure it is the smaller diameter gauge (Black Colored). It will go directly under and facing the bottom of the barrel. You can still read the pressure level. Happy Shooting!

@davidlennox9892 2 года назад

@@AirgunDetectives Thanks, got new tank today, will attempt to re-use regulator. Accuracy and FPE were never a problem, just shot count. A 230cc tank is too small for a .25, 380cc is more appropriate.

@JoshWrld999 2 года назад

Is it ok to put a Inlet 4500psi, Outlet 2200 psi Compressed Air Regulator on a 3000 psi tank.

@rivit7615 Год назад

Sure. As long as the tank is never filled higher than 3k psi. Technically the tanks can hold MUCH MUCH more than the rating. Otherwise people would be killing themselves all the time. Also make sure your tanks are hydrostatically tested every 3 years for safety. These things actually expand and contract every time they are filled. Its almost impossible to notice but they do. Over time the tank will weaken. Hydro testing is fairly cheap, about 30-50 bucks . Don't skimp.

@6xflowerranch890 Год назад

2:07 what are you aiming at if the scope covers are closed? 🤔

@AirgunDetectives Год назад

Just lining up the rifle over the chronograph.😉👍🏻

@joeanon5788 Год назад

The first gen Gauntlets are now going for $225, and I would love to get one at that price...PLEASE where did you find the thread compatible tank and regulater. I can find inly tanks with M18 threads and regs with 5/8' threads on Amazon. Any help would be greatly appreciated, Thanks in advance.

@AirgunDetectives Год назад

Hi Joe, I purchased mine on ebay a couple of years ago. You might not find the same regulator filler valve/gage configuration (180 degree) but there is room for the gage to point upward, under the barrel, and the filler port out to the side (45 degree) Good luck.👍

@slidelltowne183 Год назад

Worthless! no links provided so earned a thumbs down. Nothing provided not already covered in other videos.

@jaapsantema8521 Год назад

Can you give me a link to the bigger air tank and 2200psi valve. Because I can't find them with the right valve..

@AirgunDetectives Год назад

I don't have a link since I purchased that a few years ago. I would look on eBay. Also, the regulator may line up a bit different, but that is okay as long as the filler valve is lined up in the right direction so it's easy to fill. Most paintball stores could set you up with the tank and the valve. Happy Shooting!

@jaapsantema8521 Год назад

Yea the valves with 2200psi have a pressure meter on the front and the filling nipple is on a place where a gauntlet needs the nipple on the back side, but the valves on ali, eBay ans Amazon is the nipple 90 degrees in stead of 180 degrees. So the meter is on the left or right an the filling nipple needs also to be on the left or right....

@MrPrimoPR 2 года назад

Do you sell those tanks with the regulator? I have the gun but I’m not too experienced in buying parts like those.

@AirgunDetectives 2 года назад

Unfortunately I do not but you can find a paintball shop that could hook you up and install it. Tell them what you want to do..show them the video 👍

@MrPrimoPR 2 года назад

@@AirgunDetectives Thank you. I was wondering if the larger tank with the regulator of the smaller one would work, and if so would it increase the shot count significantly? I get 24 shots 3 mags of 28g Benjamin domes from the small tank filled to 3000 psi.

@jaybautista6673 Год назад

What are the names for those tanks?

@AirgunDetectives Год назад

They are very common in the "Paint Ball" hobby. Just a high-pressure tank.

@abitoutside 2 года назад

Ohh Its a cigar day for sure

@brorjordas1979 2 года назад

Hah! For sure! I actually lighted one just before to watch this episode. What a coincidence!😂

@AirgunDetectives 2 года назад

A stogie and an Airgun Detectives video....what a great combination 👌

@brorjordas1979 2 года назад

@@AirgunDetectives Absolutely!

@secretamericayoutubechanne2961 Год назад

Why do you need a suppressor? If you whack a bird the other birds are gonna see it and fly off most of the time. If you hit an iguana they re alone. Plus the 100$ upgrade just for 8 more shots? The gun is powerful enough. You can buy a pump for it just like a bicycle pump.

@Leadslinger619 7 месяцев назад

Ever watched dove hunting or pigeons, those birds won't fly away they just stay there like dummies looking at the dead pigeon next to em till you shoot them too 😂 all depends on species of bird, and also a lot of people do backyard plinking and this rifle does bark quite a bit not all neighbors are used to that so that's the reason for suppressors.

@secretamericayoutubechanne2961 7 месяцев назад

@AlizarragaLizarraga-gy2ke yah I ve seen thst on youtube with a 900$ gun at least. Im a small urban black bird killer from Denver. I bought the .25 caliber umarex Gauntlet for about 270 $ 4 years ago. I bought a bug buster scope. But the air tank is sensitive to elevation gain. The tank o rong will break when you drive over elevation

@secretamericayoutubechanne2961 7 месяцев назад

@AlizarragaLizarraga-gy2ke Now I know to unplug the air tank if you are going to travel

@Leadslinger619 7 месяцев назад

@@secretamericayoutubechanne2961 yeah that's why I upgraded my gauntlet 1 25 cal, got new Hajimotos specifications ninja V3 3000psi tank with output pressure 2100psi and installed the power adjuster and terminator airguns and outdoors carbon fiber suppressor and damn this rifle is a beast 💪

@secretamericayoutubechanne2961 7 месяцев назад

@@Leadslinger619 okay whats your 20?