Umarex T4E Glock Paintball Pistol - Slide Removal & Maintenance Guide

Подписаться 1,8 тыс.

Просмотров 19 тыс.

50% 1

Hi there, in this Umarex T4E Glock 17 Slide Removal & Maintenance video. I show you how you can remove your top slide without having to remove any pins.
There is a very specific way to do this and once the slide is off the pistol, I also show you where to apply oil and grease to improve the longevity of the slide.
I also show you the options for maintaining your magazines and keeping them oiled.
These items are always intended for paintball gameplay and are not intended for users of real firearms! Stay safe at all times!
I have added timestamps below to help you find the sections most relevant to what you need.
If you liked the video, click this link to subscribe👍
/ @tacticalmagfed
Support the channel
If you're a fan of my work and want to see more, I could really use your support. It's getting harder for creators like me to get magfed and tactical gear reviews to a RU-vid audience. By subscribing to my channel for free, or even sharing you can help me grow the channel and create more content.
If this video has helped you out and you would like to show your appreciation, why not buy me a coffee www.buymeacoffee.com/Tactical...
Every like, subscribe, share and coffee are much appreciated!
Thank you for all your support!
Boris
PLEASE SHARE THIS VIDEO
• Umarex T4E Glock Paint...
PRODUCT LINKS
The following links are for products featured in the video. Please note that some links may be affiliate links and I may receive a small commission if you use them.
USA
Umarex T4E Glock 17 gen 5
amzn.to/3BH3X64
First Strike Grease
amzn.to/3So18Np
Umarex M&P9 Pistol
amzn.to/3BGUwE2
Umarex PPQ Pistol
amzn.to/3vIqyvl
Europe
Umarex T4E Glock 17 gen 5
moderncombatsports.co.uk/coll...
Chapters
00:00 Intro
00:40 Can the slide be removed?
02:30 Why would you want to take off the slide?
03:31 Removing the slide
06:25 A closer look at pistol internals
09:12 how the internals work
09:40 a closer look at the slide
10:42 oiling the inner barrel mech
11:45 greasing the slide
12:45 attaching the slide
14:45 general maintenance of Umarex 0.43 pistols
15:53 Umarex valve maintenance Co2 cartridges
18:25 Tips and onscreen advice
19:25 final comments
20:20 Outro
#umarex #paintball #t4e
Popular VIDEO LINKS
Best T15 Mag Pouches • Best Magazine Pouches ...
PPQ Mag Drills • Magfed Reloads - T4e P...
PPQ Red Dot • Umarex Walther PPQ Red...
Contact me
Website tacticalmagfed.com/contact
Facebook @tacticalmagfedpaintball
Twitter @Tactical_Magfed

Спорт

Опубликовано:

17 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 137

Год назад

You should first remove a pin that's located under the barrel near the front of the trigger guard. Then the slide comes out easily. The pin is there to keep the slide from flying out during blow back. If you don't remove it first you risk damaging the gun.

@TacticalMagfed Год назад

Hi there, thanks for the feedback, I have advised to remove the pin in some of the comments should anyone have any problems.

@-SLEAZY- 10 месяцев назад

I tried this I still can't pull off the slide mine is stuck or something..

@FLAlesslethal 5 месяцев назад

Gotta take the front pin out first or you will really screw it up and is that other oil the t4e oil?

@scottw550 4 месяца назад

I used a 3/32 brass punch from Amazon and a rubber mallet. Raise the front of the gun on folded microfiber cloth before gently tapping the pin out.

@jordanwalker2000 2 года назад

Thanks for the informative content, as always.

@TacticalMagfed 2 года назад

Thanks buddy, glad you liked it 😎👍

@MrBluemagic76 Год назад

That helped massively. Thx a lot. I was close getting mad. 😂👌🏼

@TacticalMagfed Год назад

Thanks for watching, I know that feeling. Glad it helped you out 👍😎

@Jones-xx2gc Год назад

It shows you how to do this in the manual I got with mine. It doesn't show you how much force to use so nice video.

@TacticalMagfed Год назад

Hi there, thanks for watching. Glad you found it useful 😎👍

@ichexistierenicht3768 Год назад

Very helpful. Thanh you from Germany

@TacticalMagfed Год назад

Hi there, thanks for watching! Glad you found it helpful 👍

@johnligetfalvy9265 10 месяцев назад

I did on mine. Thanks

@TacticalMagfed 10 месяцев назад

Awsome, thanks for watching 😎👍

@danieljamesbinderystu2968 Год назад

Like others have stated.... just remove the pin at the the front, that allows the front under slide rail and a spring to pivot... and it comes off much MUCH easier. Also, this 100% works the same on the the Umerax S&W M&P 2.0, I have both the glock 17 gen 5 and and the M&P...and they are exactly the same, and come off the same. Not sure about the PPQ, I don't have that one. Also the pellgun oil is for their pellet guns.... its made from petroleum. Umarex recommends the RWS air chamber lube for their T4E markers, it 100% synthetic silicone and won't damage any seals and gaskets like pellgun oil will. The pellgun oil however is okay for the mechanical joints and hinges that aren't internal. DONT USE PELLGUN OIL FOR PUTTING A DROP OF OIL ONTOP OF THE CO2 CART. cheers

@TacticalMagfed Год назад

Thanks for the heads up on the oil. To my knowledge the Glock is the only version you can remove the slide without removing any pins. All versions can remove the slides by removing one or both pins. The PPQ needs an additional screw removed from the slide release to get the slide off 😎👍

@grahamthebaronhesketh. Год назад

Subscribed

@TacticalMagfed Год назад

Thanks, appreciate it 👍

@__WJK__ 18 дней назад

Nice + I really like the design of the magazine. It’s just too bad it's .43 cal, which makes it a no go for me for non-lethal defense or paintball game use, however, I totally get it was designed to be authentic for LE & Military training. That said, if they offered a .50 or .68 calber version, I'd buy a couple in a heartbeat!!

@TacticalMagfed 11 дней назад

Yeah, .43 cal is just about usable for cqb paintball. I use my first strike fsc for .68 paintball. Thanks for watching 😎👍

@reneseuret6271 2 года назад

Thanks for showing the process. You need to make a video on installing the red dot sight, which one do you have?

@TacticalMagfed 2 года назад

Hi there buddy, glad you liked it. You can find the red dot install video here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-sfia6dplTL4.html hope that helps 😎👍

@drgunsmith4099 2 года назад

Do you think it might eventually damage something taking it apart like that. I took mine apart and using light grease on slide and light oil on other parts makes a great difference and for the better.

@TacticalMagfed 2 года назад

Hi there, the only thing I can think might be affected over time is the slide spring. It really does get compressed when removing the slide this way. To reduce the pressure on the spring you can remove the front pin, which will probably be the method I will use in future. I agree, greasing the slide and oiling the trigger mech makes a great improvement to this great marker 👍😎

@stevenrodriguez9655 Год назад

@@TacticalMagfed what type of grease do you use on this?

@TacticalMagfed Год назад

@@stevenrodriguez9655 Hi there, I use my marker grease from First Strike. I think it is called laceration grease. I think it is a silicon based grease.

@charlescarper6044 2 года назад

Can you give the Brands of the grease and the oil you used? And how has the marker been since you’ve been doing maintenance to it? Does the slide or trigger pull feel smoother?

@TacticalMagfed 2 года назад

Hi there, I used First Strike hopperator tears (oil) for the trigger. First Strike ointment (grease) for the slide and Crossman pellgunoil when inserting the Co2 cartridge. The Co2 cartridges with added oil are from Umarex (Walther branded). The marker has been great since doing the maintenance, the trigger is no different, but the slide is much smoother after being greased. Hope that helps 👍

@FLAlesslethal 5 месяцев назад

My God, you only need as umerex says t4e chamber silicone. My teeth gringed Everytime you kept cocking your slide! Three kinds of all oil that is just damaging the hell outta your marker

@thiagotorres8881 2 месяца назад

Hello, could you make a video showing how to change the magazine release? I use my left hand and I think the mechanism is different from firearms! thank you!!

@TacticalMagfed 2 месяца назад

Hi there, I'll take a look and see what I can do 😎👍

@boxrecordz Год назад

Thank you 🙏 very helpful. If I may ask….where did you get the wall panel/ racking for your weapons?

@TacticalMagfed Год назад

Hi there, glad you liked it! I made the wall rack using a cheap tool wall from Amazon. It comes in a shiny black colour so I bought some OD Matt green spray paint and gave it a couple of coats. Hope that helps 😎👍

@boxrecordz Год назад

Tina k you for the prompt response. I was referring to the the board/racking your firearms are mounted on. It looks great and I would like to build a similar setup 😁

@boxrecordz Год назад

Please forgive me, I misread your answer to my question. You now have another subscriber 😎

@TacticalMagfed Год назад

I've had a few questions about the gun rack. If I extend it I'll make a video or blog post to show how I did it 😎👍

@TacticalMagfed Год назад

@@boxrecordz just read your second message. No problem buddy, welcome aboard! Thanks for the sub 👍😎

@ablo1652 5 месяцев назад

La Walther ppq se desmonta igual para limpiarla ? gracias por el vídeo ,saludos desde España

@TacticalMagfed 4 месяца назад

Hi, The PPQ can be stripped for cleaning, but you need to remove the front pin to allow the slide to be taken off. (Hola, el PPQ se puede desmontar para limpiarlo, pero es necesario quitar el pasador frontal para poder quitar la diapositiva.)

@kevtye3225 5 месяцев назад

Hi mate wondering what your thoughts are on the recent changes on fps for paintball pistols having recently purchased that gen 2 glock 17 T4E I'm feeling annoyed to say the least that these pistols will not be allowed on paintball sites going forward from the 19th of January 2024 . The ruling is that any pistol putting out more than 234 fps will need to be adjusted down to or below that . As the glocks have no manual method of adjustment the law renders it banned on a paintball site.

@TacticalMagfed 5 месяцев назад

Hi there, yeah this definately sucks. It doesn't make any sense to me that paintball is still using a flat FPS limit for all sizes of paintballs. The sport needs to take a more accurate measurment of Joules (power) similar to Airsoft. By taking into account the weight of the projectile (paintball) the FPS of an Umarex pistol would need to be 400+ FPS to match the same joules as a .68 cal paintball from a paintball pistol. I could take my FSC to a field and shoot FSR at 243 FPS and that would effectively have 2x the Joules that a .43 cal paintball from a Umarex would have but the umarex is banned? You can get the FPS to drop on the umarex pistols, but you have to shoot off about 2 mags worth of shots. I,m not sure you could get it as low as 243 FPS though. Without knowing the weight of the paintball, you will not know for certain if you are breaking the law even if you are at the site UKPSF limit. They are the govening body here in the UK so we will have to see what they tell the field operatorsvenues.

@-Cutz- 9 месяцев назад

So my glock has metal showing I accidently mounted a really too tight plate on and it left metal marks the paint gone but I think it removed some metal or dented it if I spray laint it will it look new again? The thing that keeps the slide blowbacked is starting to deteoriate in color is this normal and why does this happen??? Is it when the co2 smoke falls on the gun or something when firing?

@TacticalMagfed 9 месяцев назад

Hi there, it sounds like the screws/bolts used to secure the red dot could have been too long. If they supplied shorter bolts use them. Sometimes a black permanent marker can hide slide scratches. C02 can degrade seals over time, all you can do is add a drop of silicon based oil on the c02 capsule top to oil the seals during use.

@officialghostcast Год назад

Hey , the emergency mags are worth it? I mean keeping the capsules in the normal mags will wear down the seal?

@TacticalMagfed Год назад

Hi there, if you are needing to store it for a prolonged period and want to be able to fire it at very short notice. The emergency mags are the ones to have. They are also good secondary mags to have so you don't have any wasted co2 if you don't shoot it you don't puncture the capsule 😎👍

@AnneewakeeChampions Год назад

Do you know if we can replace the slide back plate for a custom one?

@TacticalMagfed Год назад

Hi there, the slide back plate isn't removable on the Umarex marker. The slide is one solid piece. Hope that helps 😎👍

@charlescarper6044 2 года назад

There is a part I was trying to buy that you can use for real glocks where you change the barrel and you add a laser to it and you can fill it up with CO2. Basically shoot in the house laser targets for practice. I took my t4e glock apart and found out you can rage the barrel off. Unless… you know if a way or is it made that way? Also could you change the spring to make the velocity a little lower so it works for paintball fields? Mine lets me but they want me to dry fire it a few times.

@TacticalMagfed 2 года назад

Hi there, the outer barrel, chamber and trigger block are all one unit and cannot be stripped down as far as I can tell. The internal barrel and trigger can be removed, but I don't think that there would be any way to swap it out for a part for a real Glock. The spring is purely for the blowback action of the slide so I don't think changing it will affect the velocity. I don't understand why some sites don't get that the lighter weight of the .43 paintball even at higher FPS equals fewer joules than a .68 paintball at a lower FPS. I do the same as you and just fire off a few shots until they are happy with the FPS. Hope that helps 👍

@charlescarper6044 2 года назад

I appreciate all the info. I ding’d up my rear sight area trying to add a tru glo sight. Any idea where to get a new slide OEM or aftermarket? It has the sight attached but I see raw metal scratches now.

@TacticalMagfed 2 года назад

Hi there, I haven't ever seen an OEM slide replacement. Umarex us (or T4E USA) or Umarex Germany may have a contact page or Facebook page where you can ask them?

@TacticalMagfed Год назад

@@The.Toaster hi there, thanks for commenting. Having a baseline for the various paintball calibres makes a lot of sense 👍😎

@jigsaw666jigsaw Год назад

Hi, do you have the same issue, that if you shake with gun, you hear little rattling from firing pin? Is it normal?

@TacticalMagfed Год назад

Hi there, I have never noticed anything rattling. Just checked and I can hear a very faint rattle, but I really have to shake it hard. Hope that helps 😎👍

@DieWehrmacht44 2 года назад

Can you in anyway change the front sight I would like to put suppresser sights on mine and was wondering if you can change it at all

@TacticalMagfed Год назад

Hi there, I haven't removed the front sights, but I think they are fixed on with a screw on the underside of the slide. I don't know how that compares to a real Glock front sight. But it could give you an option to change the front sight. Hope that helps 😎👍

@DieWehrmacht44 Год назад

@@TacticalMagfed thank you for your reply really been enjoying watching your video on the glock it’s my first paintball marker so your videos are great and full of info !

@TacticalMagfed Год назад

@@DieWehrmacht44 no problem buddy, thanks for watching 👍 I really like the Glock too. There are a few more videos to come soon 😎

@jesuschrist338 29 дней назад

I want to ask,can you change slide on T4E glock? Or how do i get to mount an optic?

@TacticalMagfed 11 дней назад

I don't think you can replace the slide, but I made a video on how to install an optic ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-sfia6dplTL4.html hope that helps 😎👍

@joshcook6205 5 месяцев назад

Has anyone had any firing issues? My t4e gen 5 will fire the 1st round but not the 2nd or 3rd. It's not leaking any air and I only had it for 5 months well maintained.

@TacticalMagfed 4 месяца назад

It sounds like it is not cycling the slide back to charge the hammer? Will it shoot a second shot if you manually rack the slide? If it will shoot after manually racking the slide the blowback valve could be damaged. There is a green rubber valve (see 09:40 in the video) on the inside of the slide, if it is torn or damaged it will stop the blowback action and the slide will not rack and set the hammer for another shot. Hope that helps 👍

@randyjatman7792 Год назад

HI. I Bough the Glock 4th gen GBB and the next week got the T4E Glock 17 gen 5 and the firing pin fell out in two pieces first time shooting it. they are not being helpful and I dont want to mail it in and wait weeks. I need the fire Pin and spring. Do you know where I can get one. it's such a wast right now and the slide on the 17 gen 4 gbb is already scrapped up from pulling it in and out of a holster while adjusting it. if you could help me with the firing pin for the paitgball that would be great.

@TacticalMagfed Год назад

Hi there, I have heard of a few people having issues with t4e firing pins. I've never had it happen to any of mine, but I think it happens if you insert or remove the magazines without cocking the slide\pistol. The hammer can sit on the pin and then it is snagged by the mag when inserting emoving it. But it could also be a bad batch of pins too! I think what you need is a "Umarex .43 Cal T4E Pistol Blow Back Assembly" kit (part number 81.40.0002) They fit all of the current T4E paintball pistols. If you are in the UK you can get one here www.landwarriorairsoft.com/product/umarex-43-cal-t4e-pistol-blow-back-assembly-13235 if not you could contact a Umarex reseller\distributer to locate parts. Hope that helps 😎👍

@randyjatman7792 Год назад

@@TacticalMagfed yeah I was shooting it the first damn clip and it Jamed. While I was playing with the slide I pulled the clip out and I think that broke it. I did realize it went that far out. And they are a joke. Plus the BB gun is messed up after a week. Do you know where I can get a firing pin ?

@TacticalMagfed Год назад

I think what you need is a "Umarex .43 Cal T4E Pistol Blow Back Assembly" kit (part number 81.40.0002) They fit all of the current T4E paintball pistols. If you are in the UK you can get one here www.landwarriorairsoft.com/product/umarex-43-cal-t4e-pistol-blow-back-assembly-13235 if not you could contact a Umarex reseller\distributer to locate parts. Hope that helps 😎👍

@TheCherryUrban 2 месяца назад

How you pass chronograph? How you lower velocity to 260 fps

@TacticalMagfed 2 месяца назад

That's a tough one to answer. It used to be accepted that .43 cal pistols would chrono high. You can get the FPS down by firing of 10 shots or so. Some sites may still allow you to do this, but a recent event required and FPS of under 300 with a fresh co2. Some of the umarex pistols couldn't get under. There is no velocity adjustment on the umarex pistols, hope that helps 👍

@Rolling_90 2 года назад

can you upgrade the valve on these I couldn't find anything online ?

@TacticalMagfed 2 года назад

Hi there, I don't honestly know. I haven't come across any mods to upgrade them and I'm pretty sure that Umarex haven't released and upgrade kits for any of the T4E pistols to date.

@justzzack Год назад

What dovetail rmr plate did you use, I ordered on but it didn’t go in and damaged my slide

@TacticalMagfed Год назад

Hi there, it's a cheap replica red dot mount with a standard Glock dovetail. The Umarex slide cutout is not standard (it is tapered in the centre to keep the plastic sights in place). I filed the dovetail that came with the mount (not the slide cutout) until it would fit. It has worked great without damaging the slide. Check this video to see how I did it ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-sfia6dplTL4.html hope that helps 👍😎

@justzzack Год назад

@@TacticalMagfed I had given up on and returned the rmr 😂🤦🏻‍♂️ but I’ll try in the future

@jantizionist9145 2 года назад

can anyone tell me what is the best oil for a T4E, can I use Lucas gun oil, I'm doubting it as it's petroleum based, they has to be something cheaper then the crap they market online

@TacticalMagfed 2 года назад

Hi there, you need to make sure it is an airgun oil or lube. I think they are silicone-based to ensure that the seals don't get brittle and crack. I use pelligun oil from amazon on my Co2 pistols. Hope that helps 👍😎

@-Cutz- 9 месяцев назад

Ive boughten silicone spray but it has like a garage door on the photo but it should still work right? I also got a 3in1 liquid oil silicone drop bottle idk if its too much or will harm the gun marker? Idk i just use it on metal parts and drop on the co2. But i stilll have super lube 21030 but it says it has no silicone but its a good grease with syncon or whatever. I tried to find the super lube that says silicone grease and o ring silicone but not in stores gotta order so I'm trying my own silicone products. Ive also bought a red and a blue silicone clear lube above the caulk section in home depot. Omg it is caulk im so dumb "Supreme Silicone 2.8 oz. Clear Window and Door Caulk" this ones blue and i got the red onr which is for bathrooms lmaonfailnsonhard

@TacticalMagfed 9 месяцев назад

I just use my paintball marker oil and grease. It is the first strike hoperator tears, and laceration grease. Both are safe for o-rings and seals.

@-Cutz- 10 месяцев назад

How did you put the red dot on? Is there a way to take off the iron sights because I'm lost.

@TacticalMagfed 10 месяцев назад

Hi there, I have a video running through the red dot install here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-sfia6dplTL4.htmlsi=DQiphl9_b89dm8e_ hope that helps you out 👍😎

@Passportbro33Mark2 4 месяца назад

Is it possible to loop the gun without taking it apart?

@coreybell212 Год назад

does the barrel come out and can you replace with a threaded one?

@TacticalMagfed Год назад

Hi there, the barrel and trigger are all one piece. the inner barrel moves backwards and forward within the outer barrel. I have never attempted to take them apart (never had a reason to). There are no threaded barrels off the shelf as far as I know and I haven't seen anyone making modded parts. Hope that helps 😎👍

@FLAlesslethal 4 месяца назад

Anybody know where I can find the black frame pins for the Glock 17 gen 5 marker I dropped one while doing some maintenance?

@TacticalMagfed 4 месяца назад

if you are in the states try contacting T4E their details are on their website www.training.t4eguns.com. If you are in Europe\UK try contacting Umarex via their contact page www.umarex.com/contact.html. Hope that helps 👍

@FLAlesslethal 4 месяца назад

I found it the next day and I wasn't even looking for it 😎 Thanks for the info though

@TacticalMagfed 4 месяца назад

@@FLAlesslethal no problem buddy, glad you found it 😎👍

@teamsixpb463 Год назад

Hi men, how did you to put the mini dot on the carrier slide?

@TacticalMagfed Год назад

Hi there, check this video out that I made for the red dot install ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-sfia6dplTL4.html hope that helps 😎👍

@teamsixpb463 Год назад

@@TacticalMagfed thanks men

@TacticalMagfed Год назад

@@teamsixpb463 no problem buddy 😎👍

@RayRay-vv9kb 9 месяцев назад

How is that red dot sight mounted? In the rear sight groove?.

@TacticalMagfed 9 месяцев назад

Hi there, that's correct it's a dovetail sight mount. You remove the rear sight and insert a dovetail that you can mount the plate on. I have done a video on how the red dot was installed ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-sfia6dplTL4.html thanks for watching 😎👍

@PFunk609 6 месяцев назад

@TacticalMagfed nice i got one on the way, was curious myself. And this vid was a huge time-saver as well. 🍻

@TacticalMagfed 6 месяцев назад

@@PFunk609 no problem buddy, glad it helped you out 👍😎

@johndaviddoesmith4504 Год назад

Is there a way to take up on the trigger pull… shortening it??

@TacticalMagfed Год назад

Hi There, not that I know of. It's a mechanical trigger that moves the inner barrel, so any shortening of the trigger pull would affect the barrel movement and loading of the paintballs. One of the other viewers mentioned changing the spring to reduce the force to pull the trigger, but I haven't tried it myself. Hope that helps 😎👍

@randyjatman7792 Год назад

I was wondering if you knew where I can get a firing pin for it. First time using it the 5th shot it Jammed and i the slide wouldn’t release. I took the clip and the firing pin came out in two pieces. I can’t find the receipt so I can’t send it in and wait weeks to get it back and I can’t find a pin and spring anywhere. I have a $400 eye piece with a Bunch of ammo I bought.

@TacticalMagfed Год назад

@randyjatman7792 Год назад

@@TacticalMagfed Thank you. I’m in the States. I have called and asked 20 people. Nothing so far. It’s driving me crazy now. $360 paperweight right now.

@TacticalMagfed Год назад

@@randyjatman7792 hi there, I just found this on the T4E website sport.t4eguns.com/maintenance . It looks like they have stock for repairs, they maybe able to help you out? Hope that helps 👍😎 "The gun will not fire at all when the trigger is pulled. This is most likely a broken firing pin. (We have these as a non-inventory part for repairs)"

@FLAlesslethal 5 месяцев назад

Show me a picture it might just be the valve pin more than likely

@Landelutt 2 года назад

Do you know if it´s the same method for the non "first-edition" of this gun? I can´t get the bloody slide off ^^

@TacticalMagfed 2 года назад

Hi there, I'm not 100% sure. I think the pistol design is the same as they are all made in Germany under licence. The difference is the Glock case and back straps came with the first edition. It did take me several attempts to figure it out. Did you try removing the front pin? If you really want to get it off, removing both pins will let everything come out of the frame. But it all needs to go back correctly to ensure the trigger mechanism is connected to the hammer. Don't force anything, maybe wait until you have used it for a couple of months. That may help bed the slide spring in so it is easier?

@Landelutt 2 года назад

@@TacticalMagfed I have punched out the 2 pins and changed the mag-release and that was quite easy. But the slide was on the whole thingamajig the whole time. Maybe should try just the front pin and then try to take it off. I did have a hard time getting the spring-thing between the trigger mechanism and the rest of the assembly to connect properly, took a few tries to make it being able to click properly. Hardly seemed to be connected to the polymer frame at all, not very impressed with that part of the design. ^^

@TacticalMagfed 2 года назад

@@Landelutt sounds like you had some fun 👍 you should definitely try removing just the front pin if you really want to get the slide off. Surprised it didn't come off when the internals were removed though.

@Landelutt 2 года назад

@@TacticalMagfed It worked with taking off just the front-pin. Came off really easy as well. Used some wax-lubricant (RC-car grade ^^) at man it´s smooth as hell now =) Still a stiff trigger though.

@TacticalMagfed 2 года назад

@@Landelutt Awsome, glad you managed to get the slide off 👍

@ravenknight4876 Год назад

I don't understand why they decided to not make it field strippable in the same way as the original. You'd think that would be part of authentic training, wouldn't it ?

@TacticalMagfed Год назад

Hi there, its down to how the paintball pistols has to be put together. The barrel has to be fixed, so trying to make the slide removal the same as the real pistol is not possible. I agree, would be nice to have a similar slide release like an airsoft version or real Glock.

@ravenknight4876 Год назад

@@TacticalMagfed The Glock 17 Gen 4 4.5mm airgung by Umarex does have that though, so it must be possible.

@stevenrodriguez9655 Год назад

Does anyone know where I can get replacement parts for this?

@TacticalMagfed Год назад

Hi there, if you search for T4E maintenance kits you may be able to find some spares kits. In the US the training 4 Engagement website may be your best option. Hope that helps 👍😎

@stevenrodriguez9655 Год назад

@@TacticalMagfedI’ve been searching but no luck so far. I even emailed Umarex. They’re saying they want proof of purchase and it has to be printed from a computer. I bought it from my local paintball shop which is very mom and pop and not that advanced. I got a written receipt on carbon paper. Guess I’m SOL.

@TacticalMagfed Год назад

@@stevenrodriguez9655 what country are you in and what part are you looking for buddy

@stevenrodriguez9655 Год назад

@@TacticalMagfed I am in the US. Basically if you take the slide off and look underneath there is the “nozzle” (for lack of a better word) that I assume marries up with the one in the magazine and supplies CO2 for each shot. One of those screws actually cracked. The threads are stuck in the hole, and the head is gone. I either need the nozzle or the entire slide itself (with then nozzle included)

@TacticalMagfed Год назад

@@stevenrodriguez9655 try contacting this site sport.t4eguns.com/maintenance#pistol-info they don't advertise parts but they can supply maintenance kits etc. They maybe able help?

@followme4350 2 года назад

What materials is the gun made of inside like the barrel, firing pin, etc.?

@TacticalMagfed 2 года назад

Hi there, the internals are mostly aluminium. The valve pin is steel and so are some of the trigger mechanism parts. I think the internal and external barrels are aluminium. Hope that helps 👍😎

@followme4350 2 года назад

@@TacticalMagfed Many thanks for the answer. I asked because as far as I know Umarx produces cheap. Especially these types of marks. Zinc circus is the usual cheap metal that Umarex uses for blank guns or paintball markers. They went to great lengths with this marker and made the slide out of CNC machined aluminum, but the internals are still mostly cheap materials!

@TacticalMagfed 2 года назад

@@followme4350 no problem buddy! I think that the Glock trigger block looks to be chunkier that the other models I own. But the hammer and trigger arm (that releases the hammer) are all the same as previous models.

@Spacecruizer203 Год назад

Can't wait till they bring back the sig and desert eagle tell em John Wayne said so...

@TacticalMagfed Год назад

That would be epic 💪😎

@DitzyClouds Год назад

so there is something wrong with mine then. i can take the slide off way too easy i can even do it one handed on mine!

@TacticalMagfed Год назад

Hi there, does it shoot ok? If nothing else is causing any issues you should be ok?

@DitzyClouds Год назад

@@TacticalMagfed na i had to send it in. the guiderod assembly was worn out already aswell as the sliderails on the back of the "reciver" only had about 250 to 300 rounds thru it will be my first and last glock / umarex

@TacticalMagfed Год назад

@@DitzyClouds sorry to hear that buddy, hope you get it sorted 👍

@paulreza5354 Год назад

So I can change the slide then ? with a compatible one.

@TacticalMagfed Год назад

Hi there, technically yes. Although the only compatible slides I am aware of are the T4E Glock 17 anyway. I don't think that any of the T4E slides are interchangeable. Hope that helps 👍😎

@paulreza5354 8 месяцев назад

Can you swap barrel with threaded barrel ?

@TacticalMagfed 8 месяцев назад

Hi there, not that I know of. I haven't heard of anyone making after market barrels for these markers.