Тёмный

Unlock all the K series manual transmissions! K Swap CSS to VSS Wiring 

VTEC Academy
Подписаться 131 тыс.
Просмотров 25 тыс.
50% 1

CSS to VSS Wiring: Getting the signal your swap needs
By Brian Gillespie and Aaron Gaghagen
The transmission you choose to use for your K swap determines certain things for your installation. Things like shifter and shifter cables need to match the action of the gear selector on the transmission. Another thing that the transmission determines is how your car gets the speed signal. There are basically two ways that Honda K series transmissions relay the speed signal. The transmission will use either a countershaft speed sensor, a CSS for short, or a vehicle speed sensor, typically referred to as a VSS.
In this video Brian shows how to wire a K series engine harness that was previously used with a transmission using CSS to be used with a transmission using VSS. Using Brian's method of adding a VSS connector will allow you to keep the option of changing back to a transmission using a CSS in the future.
Don't forget, you can visit our Amazon affiliate page to buy the tools we use in this video. Link here.
www.amazon.com/shop/vtec.academy
If you need to buy the connector and terminals we used, you can find them here.
www.corsa-technic.com/item.ph...
Like us? We’d Love Your Support!
Help Support VTEC Academy by hitting up our store for gear at vtec.academy/shop/ or help us by sharing (it’s free!) this post or others with other cool Honda people.
You can also help support VTEC Academy by shopping for your Acuity Instruments parts using our link at acuityinstruments.com/?ref=vt...
Nothing but Hondas. That’s exactly what you’ll find at VTEC Academy. Because Soichiro Honda’s passion for motorsports and his company’s ability to express that in the machines they produce make a whole lot of sense. VTEC Academy is a place for Honda fans who feel the same way and who seek the most accurate technical information and commentary to continue that very legacy and make whatever Honda it is that they drive just a little bit better. And faster.
The editors and contributors of VTEC Academy are some of the industry’s most experienced and trusted, which means the informative, unique perspectives you need are all right here. And, like you, we’re also obsessed with Hondas. So, subscribe to our channel and hit us up at vtecacademy.com or, if you’re into social media, you can get your daily dose of VTEC Academy on Instagram, Facebook, and Twitter. We’re always on the lookout for cool, fast Hondas.
DISCLAIMER:
VTEC Academy videos are for educational and entertainment purposes. We can not guarantee the modifications performed in the video are legal in your locality. Do not do any modifications to your vehicle that will void your warranty or in any way violate your local laws. We assume no liability for property damage or injury as a result of any of the information contained in this video. Use the information provided at your own risk.

Авто/Мото

Опубликовано:

 

9 авг 2022

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 86   
@alomechanthasinh4079
@alomechanthasinh4079 Год назад
Thank you Vtec Academy for Schooling us!
@VTECAcademy
@VTECAcademy Год назад
You bet! Thanks for watching. Hopefully this helps people with their swaps.
@JustinPaul1st
@JustinPaul1st Год назад
These tutorials make life so.much easier
@VTECAcademy
@VTECAcademy Год назад
We try!
@antoniorobles3498
@antoniorobles3498 Год назад
Awesome information sir !!!!! The Honda community is very proud of your channel 👏 👍 😀
@VTECAcademy
@VTECAcademy Год назад
Thank you!!
@troybuck7543
@troybuck7543 Год назад
Another awesome 👌 vid thanks Brian
@VTECAcademy
@VTECAcademy Год назад
You bet. Thanks for watching!
@ramonbriones4487
@ramonbriones4487 Год назад
Good stuff man!
@VTECAcademy
@VTECAcademy Год назад
Appreciate it!
@MetalGear_Markie
@MetalGear_Markie Год назад
Now they need a video to go vss to css 😂 great content👌🏻😎
@VTECAcademy
@VTECAcademy Год назад
We explain that here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4vu0gn0KchA.html
@MetalGear_Markie
@MetalGear_Markie Год назад
@@VTECAcademy awesome thank you!
@401kid6
@401kid6 Год назад
@@VTECAcademy that video explains the same thing, CSS to VSS. I also need a tutorial going from VSS to CSS.
@Boostlee2023
@Boostlee2023 Год назад
@@401kid6 “why didn’t you ask us last year” -vtec academy This was his response to someone else’s comment, I noticed you asked this question 6 months ago with no response.. I’d imagine that’s why…
@Boostlee2023
@Boostlee2023 Год назад
@@401kid6 I too am here in need of the same vss to css information.. NOT CSS TO VSS!
@MrEGThug
@MrEGThug 2 месяца назад
Wow this is a great video its gonna save me $200 for a dakota universe speed convertor which some videos said i should use. I put in a 04 transmission in my 06 rsx-s thanks! Cant praise you enough for doing vtec gods work. Thank you thank you thank you 🙏
@LALA-os8br
@LALA-os8br 8 дней назад
did it work?
@swide2750
@swide2750 Год назад
ty Vtec Dad
@VTECAcademy
@VTECAcademy Год назад
Ahahahha! We believe in you.
@circasurpriseme
@circasurpriseme Год назад
Smooooth it on rather than stretch it on. Makes son much sense. Definitely been doing that wrong
@VTECAcademy
@VTECAcademy Год назад
Yeah, it's something that we all did at one point in time.
@Mhchang09
@Mhchang09 Год назад
Awesome 👍🏼💪🏼
@Ontheregz
@Ontheregz Год назад
Wish I saw this last year lol, I had to do this in reverse. I had to repin my type s harness and change connector to use css then change the setting in kpro. Using a cl7 euro r 6spd, 02-04 type s harness and kpro4.
@VTECAcademy
@VTECAcademy Год назад
Why didn't you ask us back then? LOL
@ramonbriones4487
@ramonbriones4487 Год назад
@@VTECAcademy 😂
@nobodynoone2500
@nobodynoone2500 Год назад
Good info yet again. Keep crankin em out. Offtopic: If someone has a v6 6mt j-series layin around, what are the best double-wishbone chassis for a swap?
@youngb1ood
@youngb1ood Год назад
Definite best double wishbone chassis is the dc4/dc2/db7 integra by far, second best would be 2nd/3rd gen prelude,third best would be civic del sol, fourth best I'd say is eg/ek civic. 5th mazda 5/ford fusion, For rwd: e90 bmw 3 series, infinti g35/g37, mazda rx-8,
@nobodynoone2500
@nobodynoone2500 Год назад
@@youngb1ood I'm mainly worried about not reducing ground clearance without needing a 1980s redneck dragster-esque hood. Was thinkin DA/DC, CRV, or even an EF sedan if I could squeeze it.
@bluewanderer9903
@bluewanderer9903 Год назад
@@nobodynoone2500 cl7/9? That would be my first choice for that engine, very close second rd1 crv.
@lamesamelame
@lamesamelame Месяц назад
I'm New to K-Swapped information. What years and models use the counter shaft speed sensors and what years and models use VSS? Thanks
@hoopla1414
@hoopla1414 Год назад
Can you do VSS to CSS without the speed healer converter?
@bobbydelamar606
@bobbydelamar606 Месяц назад
Is this why Hondata can't read my speed? I have a 2006 Civic SI transmission and a 2004 ECM in my CRX K24. I installed a Rywire harness. At the sensor, I get 12v and a good ground. The signal wire is solid also.
@jeancarlosortiz3995
@jeancarlosortiz3995 5 месяцев назад
Hi!!! What sensor do you use??? Magnetic??? Or anologic??? I have a stock ecu in my rsx type s 02-04
@rj6198
@rj6198 Год назад
💎
@VTECAcademy
@VTECAcademy Год назад
Shine bright like a...
@keithjennings7502
@keithjennings7502 Год назад
I've fitted NSN4 6 Speed transmission for a 2005 rsx type s on my k20a2 swapped eg civic, was previously 5 speed transmission from a Ep3 civic. The speed sensor plug is different also Iam noticing it's crunching going into reverse. Iam running a Ktuned Shifter Assembly, should I try adjust the shifter to hopefully stop the reverse grind? Any help would be greatly appreciated!! Thanks
@kylemeys391
@kylemeys391 Год назад
Any reason u went for tape instead of heat shrink or tape and small pice if heat shrink over taped end sevtion
@angelpelcastre3328
@angelpelcastre3328 9 месяцев назад
Hello I have to connect at the front. I’m not sure about the harness, but everything else seems to be out of an 2005 RSx I have black, black and yellow and white and green,gray conector i need blk conector believe it’s a D6 transmission. What do I need to do? Thank you very much.
@Jose-gc2xk
@Jose-gc2xk Год назад
The wire has to be black and yellow or yellow and black?? I only see one black yellow wire
@Faby1hp
@Faby1hp 2 месяца назад
would this same process work with an 05 rsx auto engine harness what it looks like it has two css and what i got done to it is an 02 type s trans in it, k tuner and a k24a in it and i just figured out my vtec hasnt been working cuz no speed sensor
@frankrizzo2566
@frankrizzo2566 Месяц назад
What would i do to add a crv mt to an eg awd swap? The trans is from a ‘04 crv. Will i be able to do this with the fueltech?
@RazorK24
@RazorK24 Год назад
Thanks Grandpa VTEC for saving me. I have a PRB-A15 ktuner. Do I run the blue to my ecu and then use the b17 speed out for my dash? Cluster is a JDM Civic Si Eg cluster with no I’m and out. Just an in.
@VTECAcademy
@VTECAcademy Год назад
None of the EG/EK or DC2 gauge clusters have an out, they are all input only. The blue wire from the CSS or VSS should connect to pin 18 in the A plug. The VSS out is pin 25 on the E plug and should give you the corrected signal if you're setting are correct. We used the Accord ECU, so I haven't tried the 05 ECU to see if I can get that to work. My guess is it should.
@RazorK24
@RazorK24 Год назад
@@VTECAcademy thank you so much.
@RazorK24
@RazorK24 Год назад
@@VTECAcademy I’ll try and get back to you
@alkalimuzikgroup2045
@alkalimuzikgroup2045 20 дней назад
I'm interested in buying an Wlemt with JDM tax k24a swap Swapped in it but has this issue Only issue car has at the moment is the speed sensor is not reading proper voltage because it is wire to a 5v and needs to be wired to a 12v car still runs and drivers is this easy to do I also therea a converter I can buy for it
@willcannady4024
@willcannady4024 Год назад
Would you recommend testing each plug after doing splices, etc?
@VTECAcademy
@VTECAcademy Год назад
You can, but we haven't had problems doing it this way.
@nobodynoone2500
@nobodynoone2500 Год назад
If you feel like you maybe should test, absolutely test. It takes a bit longer but grants a measure of sanity when troubleshooting later. I bought a swapped civic half price because they had the injector wires swapped and couldn't get it running right. Took me longer than I care to admit to figure it out but still runs fine to this day!
@kyranwoodbury5300
@kyranwoodbury5300 Год назад
How would you go about changing vss to css? Using a rsx 02-04 harness. Where would you get the 5 volts from and what’s the pin out like? Obviously this Rsx plug is setup for 12v
@MrEGThug
@MrEGThug 2 месяца назад
U ever figure it out?
@kseries20-24only
@kseries20-24only Год назад
@VTEC Academy I've got an Integra I'm putting a K20Z3 with RSX BASE 5 speed transmission into (have 02 Type S wire harness), my question is since the base trannie doesn't have 6 gear, there is no lockout mechanism? Do I just ignore the lockout plug?
@sepupr21
@sepupr21 Месяц назад
Yes.
@JustinPaul1st
@JustinPaul1st Год назад
Please remind me the color order as per number order when looking at connector from.front...☝☝☝
@VTECAcademy
@VTECAcademy Год назад
It's a female connector so it is numbered from the back. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_P3V8oWBGgM.html
@user-tk3xj8ww2d
@user-tk3xj8ww2d Год назад
👋👍👏
@VTECAcademy
@VTECAcademy Год назад
Exactly.
@rayvnicolas24
@rayvnicolas24 Год назад
Would this work the same for my 06 Rsx type s? The only thing different is that I have the CRV awd trans (VSS). My concern is if what you showed on the video will allow the Rsx speedometer to work?
@VTECAcademy
@VTECAcademy Год назад
I haven't tried that, but it should.
@rayvnicolas24
@rayvnicolas24 Год назад
@@VTECAcademy so I need a 12v power to power the VSS. Wouldn’t that send a 12v from the signal wire to my Rsx ECU?
@vado7757
@vado7757 2 месяца назад
How can I make the vss work on a 2013 si stock transmission case with mf factory 1-4 gears? Can I by pass without swapping cases or taping for a speed sensor and adding ring gear ?
@VTECAcademy
@VTECAcademy 2 месяца назад
Wire it for CSS and use the Dakota Digital Universal Speedometer Interface.
@Uristypes
@Uristypes 9 месяцев назад
I have an 06 type s with an 04 type s transmission. I need to do the css to vss like the video. My only concern is if I need Kpro or a tune in order for it work again. Will it turn off my CEL code for speed sensor? Will I be able to hit vtec again? Will it work normally? Will it mark the speed the same? I’m just worried if I do all the wiring and it doesn’t work if I’ll need kpro in order for it to work again
@MrEGThug
@MrEGThug 2 месяца назад
Did u ever end up finding out? Im in the same boat
@Uristypes
@Uristypes 2 месяца назад
@@MrEGThug I did find out a solution. You will need kpro or ktuner or some sort of end user kit, do the wiring he did here and all of it correctly also some sort of speed converter. Like a Dakota digital or you can get the ktuned one as well and do the wiring for that one into your wiring harness or ECU. I was worried I wasn’t going to get it right because he isn’t very specific about which yellow black wire to connect to in the video. I ended up just tapping it onto any yellow black wire and I haven’t had any issues with anything and it did turn off my check engine light for speed sensor but still didn’t mark speed. I still couldn’t hit vtec either. That’s where the tuner comes into play. Once you set up the tuner there will be options for a speed calibration. I use ktuner so mine had the option there for 02-04 transmission. You just have to figure out the numbers on there to make it work correctly. Also fixed my vtec issue. I do have CAI/H/E so I did reflash 2 on ktuner. If you have any questions, message me and I’ll help you out!
@jonp346
@jonp346 Месяц назад
@@Uristypes I’m using an 08 accord five speed transmission in my 05 type s I got it running on the stock ecu but I don’t know how to switch it from vss to css
@Uristypes
@Uristypes Месяц назад
@@jonp346 you might need to do some wiring at this point bro, or in need of the tuner. Not sure how you’ll be able to get the ECU to send the signal to your dash unless it’s the same way with me, and that was with ktuner and the ktuned speed converter also doing the wiring. VSS TO CSS. Since you have an 05 type s it runs with a VSS. You might need to buy the pigtail connector for the CSS and do the wiring he does in the video, like taking out the pins and putting them into your CSS plug. Once you get it done. Connect it to the CSS and see if it changes anything
@Uristypes
@Uristypes Месяц назад
@@jonp346 if nothing changes then you know the signal is probably the opposite. Since VSS run with high frequency and CSS with low. That’s where the Dakota digital will help you if you decide to take that route
@rickybobbybuilt6884
@rickybobbybuilt6884 Год назад
My only concern is im finding the Solid blue Yellow with black stripe And black in my harness But on my css plug i have 1 solid yellow 2 black/white stripe 3 green/ bkack strip. On my css plug. Im going to vss. Car is 2011 civic si with k24a with rsx trans with vss. Trying to under stand which of these are power Signal Ground any assistance will result in paypal read to pay for your time. Thank u in advance!!!
@VTECAcademy
@VTECAcademy Год назад
I’ll try to answer the question tonight when we’re doing our live broadcast at 6 PM Phoenix time
@rickybobbybuilt6884
@rickybobbybuilt6884 Год назад
Do I just want to be on your main RU-vid page and wait for you to go live?
@billme99
@billme99 Год назад
I’m using RSX base harness and trans. VSS still throwing p0500. Smh
@VTECAcademy
@VTECAcademy Год назад
What car? What ECU?
@1tak3zayy
@1tak3zayy Год назад
I put a 04 rax transmission in my 06 si and im doing css to vss which wires to I need to tap in too
@VTECAcademy
@VTECAcademy Год назад
The signal wire from the VSS and the voltage wire and ground wire from the TPS.
@Jose-gc2xk
@Jose-gc2xk Год назад
Is it the same when using the z3 trans ? Lmk asap
@Jose-gc2xk
@Jose-gc2xk Год назад
Another question so will my cluster work on my ek with a z3 trans
@Boostlee2023
@Boostlee2023 Год назад
I fucking hate trying to find facts.. when you’re saying the vss has a 12v signal and css has 5v signal.. yet k-tuned is saying they both have a 5v signal…
@VTECAcademy
@VTECAcademy Год назад
If that is what K-Tuned its saying, they're wrong. The power wire is yellow black and that wire is always 12V. VSS will still work with 5V though.
@Boostlee2023
@Boostlee2023 Год назад
@@VTECAcademy I’m the same guy from humbles post. What pins are the 5v signal and ground?
@Boostlee2023
@Boostlee2023 Год назад
Verified A11 tps ground and A21 TPS 5v. Just got mine wired up today
@VTECAcademy
@VTECAcademy Год назад
Glad you got it sorted out.
@Boostlee2023
@Boostlee2023 Год назад
A11!!!!! My bad not a10
Далее
Hondata Speedo Fix Pt2: CSS or VSS, it'll work!
10:06
When You Get Ran Over By A Car...
00:15
Просмотров 3 млн
A K24 Swapped Fit is the Ultimate Daily Driver
13:08
Просмотров 10 тыс.
EVERYTHING NEEDED FOR A K-SERIES SWAP!
15:09
Просмотров 81 тыс.
Reverse Lock Out Quick Tip
5:43
Просмотров 15 тыс.
The Secret to a High Revving K-Series Engine
9:00
Просмотров 385 тыс.
РЕМОНТ ДОРОГ В ШВЕЙЦАРИИ
0:17
Просмотров 4,7 млн