Тёмный

(Update) AD-1 Amp Dyno Taramps Bass15k by Jones Subwoofer Solutions JSS 

Facekicker
Подписаться 8 тыс.
Просмотров 22 тыс.
50% 1

Updated run of the Taramps Bass15k on the AD-1 Amp Dyno by Jones Subwoofer Solutions JSS
Some viewers commented on our voltage, others were just disappointed in the results in our previous video. I try to stick to using factory recommendations when it comes to size of wire used and voltage I'm charging at when we run our dyno- this is a case where we believe the factory recommendation of two runs of 2/0 input are insufficient.
We upgraded our dyno bank by adding 4/0 runs between bus bars and moving my chargers off the AGM side and onto the lithium bus bars. We also added dual inputs to the Bass15k for four total runs each for positive and negative inputs.
Was it enough to see rated?
Please watch the video and comment below.
Remember to like and subscribe!

Авто/Мото

Опубликовано:

 

14 май 2020

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 125   
@trevorbeeler4582
@trevorbeeler4582 4 года назад
need more battery bank. would easily do certified 15k. thank you for doing us bassheads a service and dynoing amps my friend. we greatly appreciate it.
@bryantguinn1687
@bryantguinn1687 3 года назад
I swear 😂
@trevorbeeler4582
@trevorbeeler4582 3 года назад
@Hammerback0 that's not what I mean by more electrical 😂. Doesn't need higher charging. Needs at least 200amp alt and bigger bank. These amps need proper electrical. Same as any amp.
@bigblank69
@bigblank69 3 года назад
Never going to get 50% more power on 2 more volts....
@BenaresDarkness
@BenaresDarkness 3 года назад
@@bigblank69 You can't say that for all amp's I've seen it happen in person.
@coolstreetman
@coolstreetman 3 года назад
Yes thank you for doing dyno runs for us Broski
@bigboi4895
@bigboi4895 3 года назад
I have ran that amp using 1/0 gauge ofc. Still run perfectly
@zaywilds3579
@zaywilds3579 3 года назад
Nice upgrade to the bench man, can't wait to see more tests in the future!
@mccleery3
@mccleery3 4 года назад
I'm interested in results on the Bass 20k if you decide to dyno it as well 😁
@franklinwalker9606
@franklinwalker9606 4 года назад
Taramps rated Bass LINE in 14.4 ..... On the dyno the voltage drop do 12.5 an stil get 10.000 watts ..... Amasing
@MrRey007
@MrRey007 4 года назад
Yep very good numbers but still. 14.4v is very difficult to hold on any system.
@mariuss9712
@mariuss9712 4 года назад
@@MrRey007 Not in this day and age if you have a big lithium bank!
@ProvoBeastAudio
@ProvoBeastAudio 4 года назад
Good work sir, love it.
@95Sn95
@95Sn95 3 года назад
Impressed with your power bank that's a serious amp to power. I made a suggestion on another channel awhile back from someone claiming there power supply wasn't sufficient of taking some scrap steel and fab up a mount that holds an alternator (like old style GM 1 wire) and a stout 220v electric motor from like a washing machine or compressor and , with correct pulley selection you could make some serious charging and capacity for test battery bank,. I just ended up with responses like that's pointless you use as much as you make... No shit was my response seems if I have to explain it's not to create power it's a way to convert power for test bench seems 250A chargers are really expensive and some audio guys may have a spare car audio alt or go salvage yard and grab a used diesel pickup alt probably it would be 250A for next to nothing and recycling facility or local dump an grab an electric motor for possibly free. Just set it up in a back room for noise or place outside during testing. Just a budget solution for batt bank charging. You obviously have that covered you test bench power is pretty stout.
@xxgunzgamingxx1279
@xxgunzgamingxx1279 3 года назад
Who needs this much rms 🤪great vid
@jay_shipes
@jay_shipes 3 года назад
I missed the first video but will look for it. I have this amp btw. Glad you stepped up to make this video. Maybe the first one out there. My question is.. what hertz is thus dunk being ran at? Most Amps are dyno at 40hz. I believe the specs on this amp is at 60 hz. That itself would be the difference in the numbers besides the voltage drop that we all see. Thx man!!
@Facekicker
@Facekicker 3 года назад
Testing done at 40hz
@jay_shipes
@jay_shipes 3 года назад
@@Facekicker thx msn. Keep up great work.
@suthtokcraew1227
@suthtokcraew1227 3 года назад
yess, all taramps bass line is rated power tested on 60hz track @ 14.4v and this dyno test run is 40hz + voltage drop below 14v
@jay_shipes
@jay_shipes 3 года назад
@@suthtokcraew1227 yep. Just got my second 15k installed after alt and lithium upgrade. Very satisfied by the power it does for only $1100
@RyanBassForLife
@RyanBassForLife 4 года назад
Next you or Buget 💎 Gem Or Buget Bust or Derrick Big D Wiz needs to TRY THE NEW ROCKVILLE DB COMP AMPS WITH THE BUILT IN VOLT METER! IT COMES IN A CEA RATED 3500 WATT FOR $349 OR A 3000 CEA RMS WATT RATED FOR $299. BOTH ARE LINKABLE FOR DOUBLE THE POWER IF YOU GET 2. JUST KNOW WHO EVER GETS TO IT FIRST WILL PROBABLY GET 15000 MORE SUBSCRIBERS AND 350,000 VIEWS😀
@lowhertzhighspl
@lowhertzhighspl 3 года назад
sarcasm sensed
@ernardbonny997
@ernardbonny997 3 года назад
THAT I WOULD LIKE TO SEE
@ChannelZeroOne
@ChannelZeroOne 3 года назад
FYI, The music in the background will eventually get you a strike unless its copyright free. I had one when posting an exhaust note clip. I didn't even hear the music lol. Also what's the track, sounds dope. Just trying to save you from headaches. I gave up posting vids for the most part a long time ago. The community is pretty toxic these days.
@Facekicker
@Facekicker 3 года назад
The music comes from a friend and I have a release. Check out his channel here and give him a sub 👊 ru-vid.com
@Theideaman
@Theideaman 3 года назад
I'd like to see dyno test on the Taramps 160k!
@ThatsMrMark
@ThatsMrMark 4 года назад
Good video Jason. Don't forget the amplifier we spoke about.. if I need to send you one let me know.
@RyanBassForLife
@RyanBassForLife 4 года назад
Nice I love it just subscribed! Next try the NEW ROCKVILLE DB COMP amps that put out CEA rms watts not some off the wall number like there previous amps. There's a 3500 and a 3000 watt both have built in volt meters!
@lowhertzhighspl
@lowhertzhighspl 3 года назад
Rockford and Pyle head to head! [Joke] Rockford was my first "3K+" amp so I'm not ripping on'em, but there are more quality amps I'd rather see tested. e.g. Deaf Bonce, Sundown, and few others. I'll send you my T.Bass 8K to test if interested.
@RyanBassForLife
@RyanBassForLife 3 года назад
@@lowhertzhighspl I'm not the guy that test these amps but you can ask Facekicker.
@kriptic22
@kriptic22 2 года назад
Rockville 🤣
@Widowmaker2828
@Widowmaker2828 4 года назад
Would love to see my Bass 30k but I don't think the dyno would take it.😁
@lowhertzhighspl
@lowhertzhighspl 3 года назад
it should based on this vid bcuz ought to test up to 20k i think which based on this vid the 30k wont surpass 20k unfortunately.
@famousmoon
@famousmoon 3 года назад
@@lowhertzhighspl 😂 lol
@kriptic22
@kriptic22 2 года назад
Dyno can't handle this, let alone the 30k
@markiushankins8860
@markiushankins8860 4 года назад
Is that amp good for orion hcca 12 because I'm thinking about getting 1
@kiranali4898
@kiranali4898 3 года назад
I'm surprised that the voltage dips that much
@Widowmaker2828
@Widowmaker2828 4 года назад
Dumb question but just wanted to verify this is a one ohm version? Thanks and and good vid!
@Facekicker
@Facekicker 4 года назад
Correct all Bass15k are sold as 1 ohm
@BenaresDarkness
@BenaresDarkness 3 года назад
You can run it at .5 as well.
@roysongarvey2261
@roysongarvey2261 3 года назад
@@BenaresDarkness how much power have you seen these make at .5 ohm?
@lowhertzhighspl
@lowhertzhighspl 4 года назад
Are your dual runs of what, 1/0, 2/0, 4/0? I ask bcuz.. I'm running dual runs of 2/0 OFC Certified Basshead wire and now am wondering if that's enough.
@Facekicker
@Facekicker 4 года назад
2/0 welding on the amps dual inputs The majority of the bank is linked with 4/0
@lowhertzhighspl
@lowhertzhighspl 3 года назад
@@Facekicker thx
@zumazoomzoom7632
@zumazoomzoom7632 3 года назад
It will do rated if you keep the voltage up
@deeg4n000
@deeg4n000 3 года назад
FULL CLIP. R.I.P Guru
@kileysharp4208
@kileysharp4208 3 года назад
Random question what's that song that kicks in the background around 1:12?
@Facekicker
@Facekicker 3 года назад
Lol.. that's my good friend Early Adopted ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NzOKul-adlM.html
@kileysharp4208
@kileysharp4208 3 года назад
@@Facekicker thanks!
@loganmilam4065
@loganmilam4065 3 года назад
If that's what a Taramps can do I bet a Banda 15k/Soundigital could seriously pull some power
@iJustB58
@iJustB58 4 года назад
Taramps dealer told me you need 14.4 CONSISTENCY volts to reach 15k plus at 1ohm
@Facekicker
@Facekicker 4 года назад
This is highly possible I'll be swapping my bank over to a CMAX setup and will likely revisit the larger Taramps models and post updated videos
@MrIjustwatch92
@MrIjustwatch92 3 года назад
Can you up this voltage to 15? They are rated @ 14.8 We will never know true potential until someone gets a bank capable of handling this power needs. The MD series will always out perform the bass series in these test until someone gives it the same advantages voltage wise. Moat people start there test @ 14.2 already wielding more results from its tested 12.8 power. So until some rest these bass series at least with the proper voltage , it's a one sided battle sadly.
@Facekicker
@Facekicker 3 года назад
Coming soon We're on CMAX now
@hondaboy10sec
@hondaboy10sec 4 года назад
Can i send you some amps to test out? Genius Audio
@Facekicker
@Facekicker 4 года назад
Yessir
@hondaboy10sec
@hondaboy10sec 4 года назад
Facekicker send me your information @ hondaboy10sec@gmail.com
@Alanreaks35
@Alanreaks35 2 года назад
link to the input reducers?
@lowhertzhighspl
@lowhertzhighspl 4 года назад
This 15K ought to be marketed as their 12K, at best!
@varqtube
@varqtube 4 года назад
No. It shouldn't. I have gotten full power out of mine, as well as many others. They are rated at 14.4 volts not 12.6, like the MD, HD and Smart series. His starting voltage is 14.5. He has future plans of upgrading his power supply to sustain higher voltage drops. 👍 This amplifier is very badass, if you feed it what it needs. 😎
@lowhertzhighspl
@lowhertzhighspl 3 года назад
@@varqtube appreciate the input. I ended up buying the Bass 8K along with a 390a alt and xs d3400. have yet to clamp it.
@lowhertzhighspl
@lowhertzhighspl 3 года назад
clamped 4K even though I have gain matched it to my 5k sub. oh AND i bought a second Bass 8K to also run at 0.7 ohm meaning 20K watts for my 2 Fi 15" Neo 4.11s!!
@marcuskoolrt
@marcuskoolrt 4 года назад
Can you do a test on the taramps dsp 1600?
@robertlee5763
@robertlee5763 4 года назад
So what kind of power do the taramp md 12k put out.
@varqtube
@varqtube 4 года назад
There's a vid on here on RU-vid where it did 12,475 watts @ 1 ohm, dropping to 12.7 volts. I'll see if I can locate it.
@Broxine
@Broxine 4 года назад
Crazy.. it still dropped to 12.5V, even with that massive power source... why? 🤔
@lowhertzhighspl
@lowhertzhighspl 3 года назад
Bass line = power hungry
@lowhertzhighspl
@lowhertzhighspl 3 года назад
imo
@bmwforlife1051
@bmwforlife1051 3 года назад
This is actualy better, i see u have weak batteryes but it is in my oppinion perfect, meybe just a bit more power to add to be on like 13v, couse everyone who is dyno amps are 14v, and 70% of people with even crazy big sistems drops to 12v, couse well that vire and battery can be wery expensive, allmost as system... so those infos are really great ^_^ and 10k watts for 1100 or 1200 dollars is a great deal, and it is at 1 ohm, with same voltage as some people wire their subs to .5ohm it would be somewhere arround 12kwatts at 12v wich is wery epic. I will buy this 1 for my 2 subs, even i know and i saw that they die a bit faster than duno dc sundowns amps crescendos but for that amount of money if not clippin everyday if it holda at least a year i would be wery happy ^_^ and will bangin ^_^
@Facekicker
@Facekicker 3 года назад
Thank you for the comments. This bench setup was very realistic as far as being comparable to use in a vehicle and that was our intent when building the bench and most our initial videos. At this point people want to see the absolute best dyno results regardless of voltage and charging. Because of this we've upgraded to a large CMAX bank and 400a of input. We will revisit the larger Taramps models on the new bank to see if the results change with sustained 15v.
@therealpaulyd9558
@therealpaulyd9558 3 года назад
I'd love to see a dyno on the stetsom vulcan 5k. I have one but haven't used it yet and haven't found a dyno on it
@kanaljones8743
@kanaljones8743 4 года назад
Man ain't nobody trying to see no 4ohm test!!!!!
@716ShaunW
@716ShaunW 3 года назад
👌😭😭😂😂😂😂😂😁🤪
@ricardojuarez291
@ricardojuarez291 3 года назад
Bro why my bass 3k @1ohm. it clips really easy.. I have orion h2 1 15.2@ 1 ohm.. 4/0 gauge 3 batteries and it sounds kinda ok but I believe this amps are like 120 RMS..
@Facekicker
@Facekicker 3 года назад
Lots of variables Check your RCA voltage first
@ricardojuarez291
@ricardojuarez291 3 года назад
@@Facekicker what's the voltage from the RCA? What should be the reading cuz I have the epicenter as well. Thanks for reply to me
@Facekicker
@Facekicker 3 года назад
@@ricardojuarez291 if you're using epicenter, it could be contributing to the problem. You want under 4v RCA input voltage- many people claim 2v is optimal.
@suthtokcraew1227
@suthtokcraew1227 3 года назад
set your gain properly, check your rca voltage can't over 3v, my bass 3k run cleanly and hit hard to 3 jbl stadium 12" 500w x3, I set my gain half way 1/2 + volume 80%++ stay not clipping
@ricardojuarez291
@ricardojuarez291 3 года назад
@@suthtokcraew1227 thanks for the input I do appreciate, I ended up selling the amp.. but I notice something, since my Sub is 2k rms, the amp wasn't strong enough for the sub.. since I set the amp at max output before clipping is was having a hard time to push that sub.. Dyno results are way different then regular load to the amp.. it's like a sub.. free air it get its max excursion but inside the box that's totally different.. I lot of people don't realize that, in fact I don't really trust Dyno it all. I rather keep it old school my friend, thanks again..
@lowhertzhighspl
@lowhertzhighspl 3 года назад
1:37 wtf, how many batt/caps does this amp NEED to do rated power?? 5K farads and 1k ah ?!? geez! but nice vid.
@Facekicker
@Facekicker 3 года назад
A LOT. Thanks for watching!
@Gr8rome407
@Gr8rome407 3 года назад
15k is ALOT of power that requires ALOT of support
@Facekicker
@Facekicker 3 года назад
@@Gr8rome407 just waiting for a copyright claim on music that I have a release for to clear up, then I'm posting the reruns of Taramps on my new bank, much better performance.
@Gr8rome407
@Gr8rome407 3 года назад
@@Facekicker I have 2 Taramps 3k that suck the very life out my electrical so definitely no 15k for me but I love the video and learning about the possibilities thank you so much and I look fwd the the next video
@Gr8rome407
@Gr8rome407 3 года назад
@@Facekicker btw what on earth are u running that needs 15k watts lol
@got2getit204
@got2getit204 Год назад
Do the bass 8k
@owensnell4606
@owensnell4606 4 года назад
Man gotta get that voltage up hogher alot of people running these amps running lithium higher than 15 volts
@Exodia
@Exodia 4 года назад
If you hooked this up to anything about 15.5 it'd protect....
@HardKnocks160s
@HardKnocks160s 4 года назад
@@Exodia really??
@HardKnocks160s
@HardKnocks160s 4 года назад
They will protect? Above 15.5v?
@oscarcorazondeleon2316
@oscarcorazondeleon2316 2 года назад
0.05 OHM 15000 watts
@brian69frmovale76
@brian69frmovale76 2 года назад
I must admit i am disappointed. I thought this was the bass 8k until i paused the video to take a photo of the dynamic burst at 1 ohm ....
@Facekicker
@Facekicker 2 года назад
Check the newest video out - the new lithium bank did a lot for this amp ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-JSlwElyyQp0.html
@Facekicker
@Facekicker 2 года назад
And just for another reference.. I clamp ~13k out of mine consistently, running lithium at 15.6v. I am wired to .5 and rise to 1.3 ohms.
@brian69frmovale76
@brian69frmovale76 2 года назад
@@Facekicker i absolutely love this presentation . The video is 💯
@betthat313
@betthat313 3 года назад
You still don't have enough runs for it .
@Facekicker
@Facekicker 3 года назад
Bank has been updated
@BenaresDarkness
@BenaresDarkness 3 года назад
This bank doesn't support 15k and don't say it does because your own video say's it doesn't.
@Facekicker
@Facekicker 3 года назад
You seem to be behind. Several comments mention we have a new bank and will be revisiting the larger Taramps.
@BenaresDarkness
@BenaresDarkness 3 года назад
@@Facekicker Yeah well I looked through 30 comments and didn't mention anything about it.
@yourmom-ii8ep
@yourmom-ii8ep 3 года назад
Dude my MD12000 does better WTF?
@danfuller06
@danfuller06 3 года назад
MD are rated at 12.8 volts. Bass line are rated at 14.4. Bass line are strictly for Subwoofers, have a lot better rail voltage components. Your Md is a full bridge amp where the Bass only has low pass filters. Bass line will sound better and hit the low lows better due to better rail voltage. Long as you have good lithium headroom like a 100ah bank you won't drop below 14volts on Bass series. Hope that helps
@danfuller06
@danfuller06 3 года назад
And lastly Bass series does 1ohm and all the way down to 0.5 ohms long as you have the battery bank to handle the voltage. The Bass line will kill the MD series with the proper power to run it. Bass amps will run a .5ohms all day. Larger heatsink area helps will cooling better as well
@yourmom-ii8ep
@yourmom-ii8ep 3 года назад
@@danfuller06 I run 260ah 14.5 at idle so I was thinking of converting to the 15k🤔
@danfuller06
@danfuller06 3 года назад
@@yourmom-ii8ep is that lithium 260ah or 260ah of agm? Huge difference between the two. Also if you can wire your subs down to a 0.25 or 0.5 you will gain alot. You have to account for box rise and every system is different. I'm wired to a 0.5 but after box rise I'm at a 1.1 total ohms load
@yourmom-ii8ep
@yourmom-ii8ep 3 года назад
@@danfuller06 It's a combination of drycell and lithium and they have their own alternator a 350amp I run dual alts Im running at 1ohm now 4 tens 2ohm dual voice coil can I go any lower than 1ohm?
@SMHSUKRUAYDIN
@SMHSUKRUAYDIN 6 месяцев назад
Very bad AMP
@Facekicker
@Facekicker 6 месяцев назад
I've clamped 14k out of mine for the last 7 years, I would disagree with you on that.
@blizedcustoms3775
@blizedcustoms3775 2 года назад
U need more power bc these numbers are garbage
@Facekicker
@Facekicker 2 года назад
I would encourage you to listen to the part where I acknowledge that, and then I'd encourage you to check out the newer videos of this same amp.
@blizedcustoms3775
@blizedcustoms3775 2 года назад
@@Facekicker ok
@tammyforbes2101
@tammyforbes2101 3 года назад
When it comes to Brazilian don’t walk away run! Get you a nice Korean board and thank me later! Now if your competing and just about numbers and don’t mind buying a amp ever few runs go Brazilian!
Далее
Good deed #standoff #meme
00:15
Просмотров 1,5 млн
The Godfather 5D review and dyno test!
13:33
Просмотров 1,3 тыс.
Introducing the Bass 15K and showing all its power.
1:12
Taramps HD3000 Amp Dyno Test - Mini Brazilian Power!
13:07
Taramps Bass 15k Review
9:12
Просмотров 3 тыс.
ИНТЕРЕСНАЯ ПОКРАСКА АВТО
0:17
Просмотров 339 тыс.
Лучшие АВТО за 4 МЛН
0:54
Просмотров 906 тыс.
Lavage de voiture 😂
0:21
Просмотров 2,7 млн