Upgrading CW1 to CW2 on your Stealthburner

Подписаться 5 тыс.

Просмотров 26 тыс.

50% 1

In this video we detail how to upgrade from Clockwork1 to Clockwork2 on a Voron Stealthburner tool head.
Big thanks to 3d Lab Tech for helping make this video possible!
Get your Stealthburner PCB here - www.3dlabtech.ca/product/hart...
www.3dlabtech.ca/product/hart...
-- Chapters In This Video --
0:00 Intro
0:04 Remove gears from Clockwork 1 (If re-using)
0:42 Assemble Clockwork 2
2:31 Mount Motor
3:40 1 Piece Stealthburner PCB Kit
4:51 Install X Carriage
5:23 Install Clockwork2
6:18 Toolhead Wiring

Наука

Опубликовано:

2 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 45

@jeremytodd1 Год назад

I plan to do this a few weeks after I have my 2.4 build finished so this video is very helpful!

@MapleLeafMakers Год назад

Don't be in a hurry! CW1 works great too. Enjoy it while it lasts haha.

@eraldylli Год назад

I'm putting mine together right now. Nice job. Liked the post-rocky music too.

@MapleLeafMakers Год назад

Glad you liked it! Let us know how the upgrade goes.

@narf444 Год назад

thanks for the video. are the power cables of the motor the same / compatible to the ones of the CW1 (NEMA 17) motor? I mean, do I just have to connect the wires in the same order and everything works fine? (i'm not planning on using the PCB but just the cables that i laid down to the mainboard)

@MapleLeafMakers Год назад

Motor wires have no standardized colors or ordering, so unfortunately, there's no way to know without testing. You can use a multimeter to find the coil pairs of the motor.

@madorax251 Год назад

can you share the slicer setting you used to print the Stealthburner?

@MapleLeafMakers Год назад

Not really, no. If you have a specific question I'd be happy to answer. The slicer settings are almost entirely from Ellis' profile. github.com/AndrewEllis93/Ellis-PIF-Profile Tuning was done using his print tuning guide - github.com/AndrewEllis93/Print-Tuning-Guide. The SB is printed in ABS-CF at 260' with a bed temp of 110'. Hope that helps!

@filanfyretracker Год назад

I will just merge this with the tap upgrade, as that needs CW2 anyway

@jidam0 Год назад

I love cw2, just miss ercf support

@MapleLeafMakers Год назад

We haven't built ERCF yet but.... at least one of us really wants to! What are your thoughts on it?

@ljuboizsiska5448 Год назад

after I changed the LDO toolhead PCB and put a new PCB, like yours, I have problems with the chamber thermistor. Klipper reports that he is out of range. I had to deactivate the chamber thermistor function in printer.cfg. Any ideas?

@MapleLeafMakers Год назад

Most of the stealthburner PCBs don't have chamber thermistors on them anymore. The ldo sb PCB will likely have them when it releases

@m.kanawati4385 Год назад

Do you mind sharing your notes and findings about the Clockwork? is CW2 better than CW1? and in what way?

@MapleLeafMakers Год назад

CW2 is lighter weight, and *should* perform better with flexible materials, but CW1 has a bit more torque. They're both great extruders though, we've had no real issues with either one.

@m.kanawati4385 Год назад

@@MapleLeafMakers Thank you very much for your comment. I was just wondering if there's a reason for the upgrade. BTW the last video you released is awesome!

@MapleLeafMakers Год назад

For us, the reason was because we wanted to have a video about it :) There has been no noticeable performance difference in our day-to-day printing, but it sure looks nicer.

@OregonDuck Год назад

I just took apart my afterburner and put together the stealthburner and printed the cw2 parts. I got a small pancake stepper.. Do I also need to change the gears out? If so which ones would I need to get? I'm just using the old gears from the afterburner.

@MapleLeafMakers Год назад

The internal gears stay the same, just the motor swap and update the gear ratio in your printer.cfg! Good luck!

@OregonDuck Год назад

@@MapleLeafMakers oh thanks I looked at the data sheet after the post and see the stepper had an integrated 10tooth. I wasn’t sure if I took it off and swapped, but I can’t do that with integrated so it by default has to be 5:1! Thanks for answering!

@mitsubishimakes Год назад

@@OregonDuck Hi Joe!

@OregonDuck Год назад

@@mitsubishimakes heyo!

@P4P5 Год назад

@ 1:20 when you insert the shaft. Mine has about 1-2mm of play. So when i put the two halves together and shaft sits in the bearings it moves up and down. Does your do the same?

@MapleLeafMakers Год назад

It moves a little yes. If it moves too much it's not uncommon for people to put an extra shim to keep the movement down. All down to tolerances in the printed parts and shafts at that point I believe.

@valdolandar534 Год назад

I bought one CNC mechanized pieces and another of pieces in NA CF I have a CW1 in aluminum and a CW2 in Nylon, What will be the best option in this case CW1 or CW2?

@MapleLeafMakers Год назад

I'd go with CW2. there's no need for aluminum on the extruder housing, it's just unnecessary weight.

@valdolandar534 Год назад

@@MapleLeafMakers I thought in the hot irradiation of motor, then a way to not heat too much parts of plastic. To print at high temperatures in the camera.

@oaiwjebdlla 25 дней назад

hello, does it print tpu? what should I check if having troubles with tpu? thanks

@MapleLeafMakers 22 дня назад

Absolutely it does! What kind of problems are you having? Make sure you have enough tension and turn your speeds way down to start at least!

@oaiwjebdlla 22 дня назад

@@MapleLeafMakers currently I'm not even using CW2 but I read about problems with TPU. Thanks

@valdolandar534 Год назад

Apart the little motor, why is CW2 better than the CW1 ? The kits usually have the same gears parts for both.

@MapleLeafMakers Год назад

- The filament path has been straightened with CW2, to reduce friction and filament-loading difficulties. - it has much improved wire-management, with a lot more space to hide them - the added 'anti-squish thingamajig' solves some common problems printing flexible filaments - it matches the stealthburner much better

@GuidoHendriks1990 Год назад

Have you considered the 2-piece Stealthburner PCB?

@MapleLeafMakers Год назад

We've actually got an upcoming video where we show it in action. Just waiting on the new wiring harness to finish it all off! Personal opinion: The 2-piece is WAAAY better.

@GuidoHendriks1990 Год назад

@@MapleLeafMakers Cool. I just ordered both to be sure. Love your videos. 💪🏻

@mitsubishimakes Год назад

@@MapleLeafMakers Glad to hear you guys like the 2-piece, I just ordered one. When do you plan on releasing your video about it?

@MapleLeafMakers Год назад

@@mitsubishimakes It's next in the pipeline. Filming is done, it's being edited and will be released in the next few days!

@0Myale0 Год назад

SB with cw2 required nema14 with 10 teeth or the 8 teeth is ok?

@MapleLeafMakers Год назад

I've never tried the 8 tooth version, it will probably work but you'll need to set the gear ratio to 50:8

@0Myale0 Год назад

@@MapleLeafMakers thanks Cause I can't find moons bema 14 with 10 teeth. It's difficult find nema 14 at all atm.

@SaifUlIslam-eh8kl Год назад

Do we need new X carriage for CW2 Upgrade?

@MapleLeafMakers Год назад

Yes, the new one is similar but the extruder mounts from the front instead of the back.

@SaifUlIslam-eh8kl Год назад

@@MapleLeafMakers Thanks

@craigw1649 Год назад

Did you have to modify the CW2 hood to close over the Hartk pcb?

@MapleLeafMakers Год назад

We printed a different part entirely for this from the stealthburner repo - github.com/VoronDesign/Voron-Stealthburner/blob/main/STLs/Clockwork2/cable_door_for_pcb.stl