Upgrading Your Arrma Outcast 4s V2 Driveshaft and Customizing Your RC: Tips and Tricks

Подписаться 2,6 тыс.

Просмотров 3,9 тыс.

50% 1

In this video, we'll be showing you how to upgrade your Arrma Outcast 4s V2 driveshaft and customize your RC with some tips and tricks. We want to give a massive thanks to Laura at RC Spares UK for allowing us to work with them on this project. As we mentioned, the Outcast came with the same driveshafts as the Bigrock V3, but it's meant to have bigger, thicker shafts. That's why RC Spares UK offered to sponsor this video and help us upgrade our driveshaft. If you're interested in checking out their website, we've included a link in the description below. So, let's get started and see how we can improve our Arrma Outcast 4s V2!
RC Spares UK - www.rcsparesuk.com/
I will say that once browsing there site i have to mention that it was super easy to use and has a wide selection of parts for you RC Trucks and Buggies at a fraction of the cost of a hobbyshop ( Keep up the good work guys , Im impressed )
You can also message them via Facebook here- / rcsparesuk
Also We want to give a massive thanks to Custom RC Upgrades and Lee Wood for sponsoring this series of videos. Lee is a super active member of the RC community and prides himself on producing F1 quality parts for our RC bashers. We're big fans of their products and have been using them for a while now. Lee kindly sent us some upgraded differential cups for the Outcast V2, along with a bash bar to keep this truck going when it's sent to the moon! We're excited to show you how these upgrades can improve your Bash Truck
Custom RC Upgrades - customrcupgrades.com/
Custom RC Upgrades Facebook page - / customrcupgrades
Hey there, my lovely subscribers! I just wanted to take a moment to say thank you for being the wind beneath my wings, the cheese to my macaroni, and the batteries to my remote control. Without you, my videos would be as lonely as a beer without its foam. So, thank you for being the peanut butter to my jelly, the milk to my cereal, and the hops to my beer. You guys are the best, and I appreciate each and every one of you. Keep on watching, liking, and subscribing, and I promise to keep bringing you the best RC content out there. Cheers to you, my awesome subscribers! Now, let's crack open a cold one and enjoy some RC fun together!
Hope you enjoyed the Video Guys
Remember to Keep liking , Subscribing and Hit that Notification Bell
Stay awesome
ChriswithaC RC
#rccaroffroad #hobby #rc #offroad #rccar #bashing #radiocontrol #sendit #radiocontrolledcar #arrma #arrmatough #customrcupgrades #customrc #radiocontrol #radiocontrolledcar #radiocontrolcars #rchobbycar #rchobbies #rchobby #arrmaoutcast #arrmabigrock

Развлечения

Опубликовано:

1 авг 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@km7101 10 месяцев назад

I just upgraded to these yesterday! Quality part and much more stronger than stock - I used a dab oof loctite on the set screws!

@ChriswithaCrc 10 месяцев назад

Hey buddy , Yeah got to say Lee is a awesome guys 100% and the tolerances on his stuff are tip top . i can only say good things for sure . Hope you enjoyed the video Stay awesome Chris :)

@rcbeast101 11 месяцев назад

Awesome upgrades. You made it into a tank. I need to do that for my kraton 4s. Thanks for the info.

@ChriswithaCrc 11 месяцев назад

Got a few more to do yet buddy , the servo needs addressing i think before i call it a day . No worries buddy if you need any more information hit me up on Facebook or i can drop you a link to the drive cups . Thanks for watching and all your support Philly dude . Stay awesome Chris :)

@paulfriar7517 11 месяцев назад

Looking forward to seeing it run. Beach would be good 👍🏻

@ChriswithaCrc 11 месяцев назад

Hey buddy , Yeah hoping to get it out tomorrow and the beach then this weekend or early week . im going to be using this loads as have some time off work for the next week . Hope that your well buddy , Stay awesome Chris :)

@danielkroeze8218 11 месяцев назад

Nice

@ChriswithaCrc 11 месяцев назад

Thanks buddy ❤️

@chelmswoodjunction 11 месяцев назад

hi ya mate great looking truck and what a great set of grades you have been sponsored to put on the truck., cant wait to see this one out and bashing. hope you and the family are all well. cant wait to get out and start doing more videos myself with my rcs rubbish weather. peter anne and ella

@ChriswithaCrc 11 месяцев назад

Hey Pete ! Yeah shes a beauty for sure really head over heels with this truck 100% Yeah was really nice to have Custom RC Upgrades allowing me to get sponsored for these videos Lee makes some simply awesome parts , there very well thought out and made from the best materials out there . Got a video coming out at 9am so look out for that and tons more to come over the next week . Stay awesome bud Chris :)

@avolationindustries 11 месяцев назад

NIce 1! My rear axels have had a bit of a workout now, slightly twisted, but still good to go. I did get some ally ones but haven't needed to install them YET. The other upgrade I would suggest are the rear axel mud guards. The suspension arms are so long, which is great, but the front wheels give the rear wheels every rock and stone they can fling at them, and I noticed it tends to wear the rear out a bit. The other problem I have with the 4s trucks is stones and pebbles lodging in the steering and the driveshafts and just filling up inside the body in general. Be interesting to see how you go with that, and what you suggest. Excellent work with building your channel, getting the merch up and running really adds some authenticity to the whole appearance of it all. More power to you mate, can't wait to see this bad boy in action!!

@ChriswithaCrc 11 месяцев назад

Hey Avo mate , Hows the world at the other end dude ! Got to ask man hows the little dude ? has he had a go yet on the outcast yet lol . As for the Mud guards yes your right for sure 100% bud , ive got a set being made as we speak by Big Foot Customs , Im a advocate for guards really made a diffrence on my Tyhoon and Big rock keep the rear of the car clean and debris free . As for stones yes this is a issue i have had in the past with my big rock , Im planning on upgrading the servo saver and servo when i get chance to sit down and wrench on it again now , just working out which route to go down with the servo saver as the one they provide is very weak . Ah man thanks so much for all the support with the channel also its the likes of you guys that are making it what it is and i can only hope that i can keep it interesting enough for you all to want to come back and keep watching buddy . As for the merch bud drop me a email in the week and ill get a T Shirt made for you and sent to OZ as long as you promise to wear it in one of your videos lol ! Got a video of the first run of this truck coming out at 9am this morning so please make sure you tune in to watch it buddy . Stay awesome fella and by the way when you making another video man , I would love to see the outcast in action again 100% Chris :)

@avolationindustries 11 месяцев назад

@@ChriswithaCrc Going great over here thank you mate, super busy but definitely bubbling along with the videos and my plans for world domination ;-) Nice work on the guards! I wouldnt worry about keeping it interesting mate, so long as you are interested that comes through and I think thats the key. Its easy to get lost in the details. My pleasure mate, thanks also for your support! As for the shirt, I would be honored mate, look out for an email this week for sure!! Champion! I need some new threads too lol Next vid was supposed to be out 3 weeks ago lol. But I have other priorities so sometimes YT has to take a back seat. Never fear though, my vision will not die. Have a few surprises lined up so look out!! Peace and wholeness brother!!

@Terry-gj5uk Месяц назад

Great video Chris! I was told you're from the rhondda valleys can you reccomend any good spots. I have a kraton 6s if you ever want to go for a thrash 🤙

@ChriswithaCrc Месяц назад

Would love to go for a RIP buddy if your up for it we go out regular . Drop me a message on facebook if you want to . Stay awesome Chris :)

@MrYoEddy 11 месяцев назад

Greetings, am also the proud owner of a Kraton 4S v2 and have followed with great interest your "upgrade" video! When I saw the video, I was unfortunately already too late and at Custom RC Upgrades, the DriveCups were unfortunately already sold out at that time! I unfortunately don't use Facebook so could you villeicht in experience when the Drive Cups would be available again, that would be super! Hope to see many more great and informative videos about your Outcast v2 even though I drive the Kraton myself but technically they are identical except for the chassis! Best regards

@ChriswithaCrc 11 месяцев назад

Hey buddy , many thanks for watching the video , and hope that your well , i know that Lee the owner of custom Rc upgrades is currently out of the country but i can drop him a message if you would like about stock availability on the drive cups if you would like . Massive thanks for the kind comments and look forward to hearing from you Stay awesome Chris :)

@granada012000 11 месяцев назад

It would be nice if some developed a rubber gaiter to go over the CRCU diff cup and shaft to keep the ball joint clean. Looks smart though mate. 🤘

@ChriswithaCrc 11 месяцев назад

That would be cool only issue is that because it’s not a standard part companies probably would not produce them . Thanks for watching rich buddy Chris 🏴󠁧󠁢󠁷󠁬󠁳󠁿🇬🇧🤙😎🤘🚀

@Neelis23 10 месяцев назад

Surprised to see plastic crown gears on the diffs, I thought they were metal on the 4s v2. Besides that, great build!

@ChriswithaCrc 10 месяцев назад

Hey mate , Yeah i was suprised also , but now im running full Metal gearing now so all good , Weird one as this truck also came with the 3s shafts , so i belive that its a pre production model from what im told of the v2 according to Logic RC . Stay awesome Chris :)

@Neelis23 10 месяцев назад

@@ChriswithaCrc but isn't it a v1 then?

@babarendav1122 Месяц назад

Hallo, where can I find these metal outdrives, I can't find them on the rc spares website, can you send me the link to them. Thanks and have a nice day

@ChriswithaCrc Месяц назад

Hey buddy , Hope that your well , These are custom outdrives made by CRCU ( Custom RC Upgrades ) Here is the link here - customrcupgrades.com/product/arrma-4s-drive-cup-set/ Stay awesome Chris :)

@babarendav1122 Месяц назад

Thanks a lot, greetings from Germany.

@mcr.onwheels 10 месяцев назад

Seems like my outcast 4s already had those beefier driveshafts on. I took it out for a first proper run today and the pin must have flew out and the driveshaft popped out :(

@ChriswithaCrc 10 месяцев назад

Hey man wow thats a shame for sure , yeah the arrma cups seem to be problematic , so hence i upgrades mine to the CRCU cups ( Custom Rc Upgrades ) you wont get any issues with those as there captured . Hope that this helps some what . Thanks for watching Stay awesome Chris :)

@mcr.onwheels 10 месяцев назад

@ChriswithaCrc Those cups do look great! I've ordered a set of 4 pins and shims so I'll see how i go on with them for now 😅

@turbodutch 11 месяцев назад

I just installed my drive cups, but the cups are rubbing against the caster links. Do you have this too?

@ChriswithaCrc 11 месяцев назад

Hey dude , Thanks for watching firstly , So have you fitted the CRCU Drive cups ? I ran the truck today for the first time and no i dont have any issues with mine at all to be honest with you . Looking forward to hearing from you and By the way i have a running video coming out today on it , youll be able to see there . Stay awesome Chris :)

@turbodutch 11 месяцев назад

@@ChriswithaCrc yeah the CRCU ones. They are machined really well. They rub a little on the rear of the vehicle, the front seems fine. Thx! I’ll check the video out

@MrYoEddy 11 месяцев назад

@@turbodutch I am also very interested in the CRCU DiffCups and therefore could you please describe in more detail where and how they grind on the rear axle .. etc.! When were they bought and did you possibly inform CRCU about this discrepancy? I look forward to an answer greetz

@turbodutch 11 месяцев назад

@@MrYoEddy I ordered them on the 20th of july. I dont see it as a big problem but something I found odd. It touches the link where it screws to the car. Havent driven with them yet as i blew my motor lol. Dont think it can hurt but we’ll see Greetz!

@MrYoEddy 11 месяцев назад

@@turbodutch Not nice to read that your engine is broken, but funny in that I currently want to sell my entire drive unit, because I switched to a Hobbywing combo, but only because I already have appropriate programming cards and Bluetooth modules! If you have driven with the diff cups, please keep us here with your experiences up to date ..., that would be very nice! Thank you very much for that ! greetz

@PeteWylieRC 11 месяцев назад

Hey great stuff Chris. Those drive cups do look the business. I'd definitely have a look at upgrading if I break the stock ones. Kind of those companies to send you those bits. Like you say the weather should hopefully perk up and you can get out and actually drive this thing. Be interested in what you think. Cheers mate 🙂

@ChriswithaCrc 11 месяцев назад

Hey Pete , Hope your well buddy , Yeah CRCU do make some amazing upgrades , As you know im more of a Upgrade before running kinda guys or at least run once then work out what i want to upgrade from the off . Also i got to give RC Breakers UK a big shout as they had my parts out to me the next day thats service you dont get from many places . Hoping to get out tomorrow for a bit of a shake down with it on 3s as by all accounts its quite spicy on 3s , i want to get used to the way it handles before handing it its arse on 4s firstly. i suspect the servo is going to get on my wick so thats on the cards straight away , Ive got a fast 35kg servo to go right in , but i also have listened to what you said about the servo saver and planning on ordering that next week i think . Stay awesome buddy Chris :)

@ksrnate 6 месяцев назад

Hey dude! You think these will fit the V3 big rock?? It's the length I'm not sure about. I want to change to 17mm hex anyway so these could be a nice upgrade 👍🏻

@ChriswithaCrc 6 месяцев назад

Hey buddy , Hope that your well , ok so they will work with some adjustments, you’ll going to have to chop the outcast drive shafts to fit the big rock as the arms on the Big rock are smaller .

@ksrnate 6 месяцев назад

@@ChriswithaCrc I see so they're just a bit longer then. Little chopperooo is no problem 👍🏻 by the way, are them chunkier ones just off a newer 4s? They're not aftermarket parts?