Use Charcoal To Make Battery With No Expensis  

Please contact us before making this project we will guide you

AI answer... Yes, it is indeed possible to make a battery using lead plates, active carbon, and acid. This kind of hybrid battery is known as a Lead Carbon Battery. A Lead Carbon Battery combines the high energy density of a lead-acid battery and the high rate capabilities of supercapacitors. This makes these batteries excellent for applications that require both high energy density and high power density. Here is a very simplified description of how a lead-carbon battery works: 1. It has two electrodes: one made of lead dioxide (PbO2), the positive plate, and the other made of active carbon and lead (Pb), the negative plate. 2. The electrolyte is usually a sulfuric acid (H2SO4) solution, as is standard in lead-acid batteries. 3. When the battery is discharged, the lead dioxide (PbO2) on the positive plate and the lead (Pb) on the negative plate react with the sulfuric acid (H2SO4) to create lead sulfate (PbSO4) and water (H2O). This reaction releases energy. 4. When the battery is recharged, the reverse reaction occurs. The lead sulfate and water are converted back into lead dioxide, lead, and sulfuric acid. This process stores energy in the battery. The use of active carbon in the negative electrode increases the battery's power performance by increasing the surface area for the chemical reactions. This means that energy can be delivered more quickly than in a traditional lead-acid battery. Moreover, the active carbon can help to reduce the sulfation of the lead plates, a key reason for the failure of lead-acid batteries, which makes the lead-carbon battery more durable and reliable. Please note that this is a simplified version of the chemistry and reactions involved, and in practice, creating a battery involves careful control of the materials, conditions, and safety considerations. Working with lead and acid can be dangerous, so it's important to have the proper knowledge and protective equipment before attempting to make a battery.

Before you seal the top of battery filled with the carbon. Also give 2 or less amps slow charge. Prevent smoke ( sulfuric gas ) is splosive with the spark of the terminals. Very good video thanks.

Can we make it bigger..using 1000L water tank..then charge it with solar panel??will it be usefull for a house appliance??

It is amazing how many pairs of common substances will indeed function as a battery. The charge density and run time may not be as much as a commercially available battery. But it may be perfectly good for what you need it for, such as charging a smart phone during a blackout.

It's great to see intelligence, hard work, recycling used in such a way. Respect. Subbed.

Well done, thanks.

Great video! Always on the lookout for cheap or free power devices.

Revolutionary Novel idea.tq.gor sharing

Nice my dear friend

Amazing idea thank you for sharing

This is a great video my dude 😎

Thank you for the Video, How long will the battery last

Good job guys !

This battery will have the ampere/ hour of 3 series connected small cell phone battery or maybe less . 50 times less than normal. What he should have done is to make sure no plates were shorting refurbish them and reattach them, check none are shortlisted then assemble. Battery will be close to normal.

Desi Ideas:- liked & subscribed, an unique way of utilizing the old lead acid battery to a advantage, that to very minimum expense, just a skill, your Idea of opening the battery, utilizing old terminal lead, assembling technic, instead of battery plates using crushed charcoal+1250 sp.gravity sulphuric acid, as an individual cells, internal connector's making, opened box top fixing,are all amazing work of a professional, very innovative idea as DIY superb video Demo presentation, output voltage almost 12 volts as a household work quite suitable battery, finally an acceptable project.👍🏿👍🏿👍🏿

Very nice 👍

Excellent video THANK YOU 🙏🙏🙏

Great work

God bless you. Please know that you are a hero.

Before you solder the plastic cover you need to put the carbon first then soldering the plastic cover and last the acid solution.

Electrode plates are necessary for both capacitors as well as for batteries ????????

It's amazing that such a simple technique works just stunning .?

The often seen in these videos the mandatory safety sandals!😅

Brilliant idea,time to kick these fraudulent battery businesses out ,they such a rip off and that must stop.

Thank you Good info

Thank you for your great video

Nice idea if is it 12 volt then how much time back up.

thank you i have a lot of dead batteries at home I would like to make it

Good night thank you for the video do you have the Sam Amp and could you do it for any battery example 6 volts 300 Amp please

Will it be a 10A 10v battery ??

i used to see those who repair old car batteries is by removing all positive plates and negative plates, examine the bad plate then replace with a much better plate. If your own way works well and fine, though im sure it wont be a strong power like spinning the to start an engine.

Wow this is awesome

Well done guys

thank, you for you're video

1 how many ampere store? 2 wich time battery store power? After full charge 3 plus and minus how work both side filled with charcoal?

What can be the capacity (AH) of this battery ? Guess will not be able to drive an starter motor for two or three consecutive starts.

Superb

Excellent

Very good👍👍👍

Thank you!😊

Loved that first horn. Hello. 😅

Nice sand paper Bro

Danke für Deine Mühe - es kann sicher einigen Menschen helfen

Hello dear friend it's okay charcoal battery 🔋 thanks 😅😊

How does charcoal react to produce dc voltage

there are no plates in the divisions of the container? I think ints only one plate in every division= low current.

Very wanderfull

amazing! thx

good job

Some people think that it is fake .. But I guess they did not study physics in school or never hear about lemon or potato battery... This experiment is correct but this type of battery (calling supper capacitor would be appropriate) have very low energy density maybe just 1 to 5% as compared to normal lead acid battery... I suggest him try to use Activated carbon with carbon black to increase its energy density and Internal resistance.. Also increase the size of lead preferably in plate shape.

Which acid do use.

Please i like it i want to try it at home ok, is it could or soil please answer me is urgent

Ever try aluminum sulfate solution instead of acid?

I'm dying over here😂😂😂😂 the way dude said sandpaper😂😂😂😂😂😂😂

Acid kind is not clear, yet you still favourable ....

How many amperes can be obtained from this battery?

it a great idea . from scrap can you said how long it last with the lead ligh bulb on or dc motor on. you shoud sale them all ready made with out the acid that way you can ship it an cheaper so poor people can have something efficiency an cheap .hope you understand my writing

What is the current capability of this battery ? So V Low current and low voltage ?

Great work, what type of crushed charcoal powder did you use?

Would love to get the information.

But can it really work iam in trouble my battery is down

All well and good but what will freezing temp do to battery? kill it?

What use would be a battery without enough amperage? This is like making a battery for school work, the ones that are connected in series or parallel but that cannot move a toy car.

Ни понял перевод - какую катушку растираем? По моему это был графит или уголь.🤔

Which acid is this?

Ne razumem čime je čovek preko levka napunio ćelije, i koju je kiselinu sipao ili je to bila destilisana voda. Da li tako formiran akumulator može da da struju od 50A

That was interesting

What kinds of acid i have to use again?

What were you using for your soldering ? Lead and ? And are you using a welder or batteries

Will it help bring solar power to a home?

Cool

How a small led peroxide can absorb electricity ? I think it cannot starts the engine...

I would have liked and supported if you had started a car around 10 times. Lighting a bulb only ???

Thank you for these illustrations. Did you mean adding hydrochloric acid and so what percentage should it be?

Ithink you have tried somehow to make very slow discharging capacitor ???????????

which typ of acide you put in ? i want to try it at home

Great

What is that black thing made of at 3:51? Thanks

Brilliant idea

What kind of acid

How many times we can charge and discharge and how much AH

Can it start the car

Plz which of acid

How long will that battery last?

👌👌👌👌👌

What is gravity acid?

Btw gravity acid is 80/20 water/sulfuric acid

I need that technology

Possible acid quality please

Can crushed coal suffice for charcoal from woods?

reminds me of something from Hermann von Helmholtz.

these batteries work but not for high current application, or in other words these are not a high current batteries as others like lead acid, lithium-ion or lithium iron phosphate. for example first crank car engine needs around 400Amp to start which only can be provided by high current batteries. in term of batteries more current mean more time. let say 12v 10amp hour give you small time to use while 12v 100amp hour give you more time to use it.

Какъв прах се слага и какво точно се слага благодаря

There are hidden facts beyond the scene....the gradient....the am..capacity...many questions which have no answer for the time being..

Very good can help

respect to you

I don't always spill battery acid on my floor, but when I do, I prefer to rub lead on my skin.

what liquid did you add to the charcoal

Can we start a car using the battery ?