Using the Behringer Neutron Patch Bay complete guide, one by one. 

Buy me a coffee on Patreon, Paypal or YT Thanks. ► Patreon: www.patreon.com/XNB 🙌 Paypal donation: www.paypal.com/donate/?hosted_button_id=PDRRPNXHU32VG

I had my neutron since 3 years with a a single patch cable connected to bypass the overdrive. Also the occasional lfo routings. I just ordered some extra cables after this tutorial. This guy is an absolute G.

This guy. 🤝 Wow. He's a real great guy taking the time to do all this. Only because of him who actually shows to get the synth to make sounds cause most reviews don't even bother with this step and assume everyone knows it. No I own this synth for a year and all it would do is drone the same pitch until I saw his video on it. Bless!! Now, to master part two 🧐

This should be sponsored by behringer. You knew how to make the patchbay exploration more beautifully amusing.

This guy's the textbook definition of an excellent instructor 🖖

Thank you for making these super in-depth guide videos! My memory isn't the best so I constantly refer back to your Neutron and Deepmind guides. Feels like I learn something new or come up with a new patch everytime I watch them. I look forward to your future videos. Keep up the awesome work!

Absolutely brilliant. Thank you so much. Very well explained and easy to understand. You have just made the Neutron even better. This and the first video was just what I think we all wanted. I love this synth and this is by far the best video on this great instrument. 🙂

Best tutorials in RU-vid ! TNx you, great video !

You’re a star! This tutorial is invaluable, you cover everything 👌🏻

Cool video 👍 I've had the Neutron for years but learnt a bunch of new tricks and got some new ideas. Thanks!

Really good guide. Great job! Thx a lot!!!

after these two videos my head spins, but klowledge presented here is more than i got in two years from bunch of other videos and forum posts. big thank you!

Thank you so much for these Neutron videos; both have been very informative!

I'm not done watching this yet, but already the best synth tutorial I've seen online (the previous one for the controls is awesome, too).

Along with the Neutron introduction video, these by far the best Neutron tutorials I have found; perfect for users of all levels. Thank you very much indeed!

Wow! Just wow! Super useful series of videos. Thank you.

That's kind of video I've wanted when I first bought the Neutron, every function is described with some real life examples. How cools is that... subscribed!

Thank you for your time and knowledge 😉 so helpful!

Thank you XNB. You are doing a lot of work to make your video easily understandable. Very interesting.

Another great video.The pre planning you must put into these Neutron videos is amazing.It's truly opened up this synth to anyone that wants to learn every feature.Behringer at the very least need to link to these videos on there product page.

I’ve had the Neutron for a few years now(two of them, we’ll get back to that haha) and over all this time-mostly because I got distracted by straight up Modular before I learned all the elementary aspects of the Neutron, now I am returning to it, and realizing what a powerful and awesome machine it is by far the coolest thing Behringer has ever ever made, and unless they come out with the Proton(which I fully plan on buying two of those as well, and putting them in a SUPERSTACK self contained rack) will probably always remain the best thing a Behringer has ever made. So yes, I want to say I appreciate very much you making this video, and the first video as well, the Neutron was my gateway drug into Modular , as soon as I saw that patchbay, my life was changed for the better.. If I may make a request, of course, over the years, I’ve done experiments cross patching, both Neutrons. I would love to see you do a video with all the possibilities that that offers(there definitely are many possibilities as I have gotten some really freaky sounds out of cross patching them). Ok! VIVA LA NEUTRON! Let’s hope Behringer lays off the clones and in some cases THEFT and comes out with more designs, like the Proton, that can fully display what Behringer is capable of when they aren’t chasing trends, or making their money off of other peoples reputations. I think Behringer could have an amazing legacy. I’ve owned other Behringer re-issue synthesizers and none of them have come close to the pleasure that the neutron has brought me, it’s just elegant and crazy and a joy to unlock the puzzles within, I really think they should let their designers go wild and make their own mark on synthesis! OK, so yeah, if you get the time, I am ready to watch it, and share it with my fellow Neutron enthusiasts! Keep up the wonderful work, appreciate what you’re doing, NAI SAMMON

The best video ever of the Neutron. Period.

I just bought this synth. This video is great to start. Thanks 🙏

Awesome work, love this, simple guide stepping through to help me on my musical journey.

thats great! thank you

Pretty useful video, many thanks! Great job. Really just the best work about that synth.

You are really the best teacher of the world, with you, i understand everything. Sincerely thanks for that.

Thank you so much!

What a great video! Thanks ❤

great job, fantastic teacher a great pedagogic progression thanks!

Thanks so much for these videos

Great video -- thanks so much!

Another great video.. really appreciate these.👍

Thanks bro !!! You explicated very clean, hugs from argentina !

This is a Neutron Masterclass. Perfect!

Very very very useful vid. Long one but it's clearer for me what you can do with this little synth. And you can do big stuff with this huge patch bay ! And with your first vid whgich explain all button and function, it was very complete overview of this neutron. Thanks a lot for all this work. I don't have one yet but... ;^)

Really thankfull for this one :)

Super work xnb really intuitive thank you very much!

best ever explination. im buying a neutron for my 7 year old for christmas. he already rules his novation circuit. first vid ill send him after he getsd his neutron. cheers!

excellent tutorial, you are great teacher. :)

Very nice work

Love this guide, the Neutron is… intimidating to say the least but I love it! It’s a brilliant touch that her bigger brother will be called the Proton!

excellent! I learned a lot about my favorite synth!!!!

thank you !

Thank you so much

This is very useful, thank you.

Great guide

Good explain, thank's👍

Thanks!

this is awesome, thanks.

Great!!!! I was going to sell my Neutron, now I will buy a Eurorack and interate it!!!! It's a great Synth but i wasn't understanding

Great channel.

Thanks this so great

really nice video ! thanks for sharing

Cheers dude very helpful

thanks for this

I'll put in practice all of what I've seen in these amazing guide. Only after I've understand all the principles and placed it in compositions I will consider to buy a Matriarch. Thank you so much for opening my eyes to the beautiful world of semimodular

I will buy you 5 Coffee...thank for your time and knowledge...keep goin

Thank you for this video, and other videos you are making! It was really in depth, but also really nicely presented and shown on examples fot me as a total beginner with synthesis. Only one mistake was made 1:32:24 - Frankenstein was not the monster!! :D :D

Good video, I learned a couple things, but at 29:43 you say both VCF outputs are the same, but they are not. The VCF2 always runs in a different filter mode from VCF1, so for instance when you have bandpass selected, VCF2 is low-pass, when you select low-pass, VCF2 is high-pass, etc.

Really passionate explanations :) Btw. You can also split the full video in shorter videos and the chapters being Parts as well as the one full video. Just an Idea :)

thanks, now I konw how to use SUM & multiples !!!

Wow, first time they pronounce Behringer the right way in a video!!

Fantastic! Super useful. Any chance we’ll be seeing more tutorials on the other Behringer’s semi modular synths (Cat, Pro1, K-2)?

1:49:00 I set the Assign to aftertouch. I configure my Roland AE-30 Aerophone wind synth to send the breath as aftertouch and then I control the Neutron using the Assign instead of the envelopes. My video for #jamuary used that.

Thank you very much - really comprehensive! Is there a way to combine attenuators with a fixed offset within the Neutron itself? Can, for instance, Att2 be used to offset Att1 using the Sum function? Or in other words, when nothing is patched into Attenuator Inputs, can they provide CV based on pot position? Or is there another way to do so?

A trillion Thanks!!! You really help me find my way in that rabbit hole which I'm fallen into. :D I have a tech. question. At the end of the ATT 1/2 part when you are applying ATT 2 with the LFO to ATT1 CV. Why is it necessary to connect LFO to ATT2, Isn't it hardwired like that anyways? I tried the patch without the connection in question, just going direct from ATT2 OUT - ATT1 CV and I have heard no difference.

Hey! Great vid! Do you have a section about tuning this thing? For the life of me I cant seem to be able to tune it and the videos here are just not clear enough about how to do it. Even the manual isnt clear about if you get to use the app, the built in tuner or an iOS tuner app. Reddit have many people talking about tuning and most have issues but, could it be they are doing it wrong? And let's not even talk about opening it and messing with the pot inside lol. Also irrc, some firmware was about the osc tuning. Cheers!

Hi! Thx for the epic tutorial. As i see that u know a lot on Neutron, i have a question… is there any hardware shortcuts on new firmware options? Like LFO one shot? Or the app is only possible acces to those? I have search in the manual but its all about before firmware update… help.

Before you say anything I've got the nasty habit of calling In's and out's patch bays. Which is not correct in theory. But Old habits die hard. Thanks for watching !! Hope it helps.

WOW 😳 how come I didn't get a notification 🤯

Fab tutorial! Well informed 👌 However, I get no sound from the Output from the patchbay. I’ve tried OSC mix, nothing… Nothing else is plugged in blocking any signal. So how does the output on the bay actually function?

Would be great if you could go into what MIDI IMPLEMENTATION CCs Behringer includes on their synths in your videos .? Thanks.

Hi many thanks I learned a lot. can you explain to me how i can adjust the speed of the lfo. my led doesn't flash and if i use the potentiometer, the speed doesn't usually change like yours. i trigger in with midi via keystep or ableton. yesterday without Is this a midi conflict? thanks for deknen support jnf your fat tutorials. Its great to follow steffen

Really nice job. Thanks. I have a question : I would like to use an external wavefolder with, let say, the osc 1 (sine). How can I do that ? Osc 1 out > wavefolder in > wavefolder out > VCA in ? Will I lose my osc 2 ? I do not really get it ... Thanks again :)

👍👍👍

Good video. I'm not understanding your section on Midi Gate Out. I can't hear what's different about the sound you are making before and after patching it in. You say at the end of the previous section that there's a problem concerning the envelope out patches but I am not clear what the problem is. You say something about it allowing you to use your envelope for other things, but it seemed like you were already doing that in the previous section! Can you help me understand?

Hey, I have Neutron and I am looking to get Moog Mavis, is there a way to send MIDI out to Mavis? to control Mavis suing Neutron? (Mavis does not have midi, only CV) Great video, Thanks

sex a lot for the guide !! really well explained.. it helped me a lot :)

💐

a small question. I plugged my Neutron into my sound card as an instrument with a TRS cable but no sound comes out of my speakers.

My man! Do you think this one can do crave stuff but with extra? Or wouls you say its diffrent??

It would be nice to have a block diagram with patch points for reference.

Wow!! How did you get the app to work? It never works for me…

Fantastic explanation,the biggest problem,for me,is the difficulty in actually seeing what one is plugging into,especially when there are a few leads plugged in,coupled with crappy lighting..ho hum..I will/should now be able to do/produce something a little more meaningful,rather than fart noises...Thank you.

What modules are you guys pairing with your neutrons to get more mileage out of it?

pleaes make a tutorial for PWM Malevolent

Maybe someone knows, why my attenuator 2 is not connected to pwm by default?

Weird thing - Neutron is pretty quiet compared to D or Crave.

Is anything ever a lot too aggressive?

You can make a comb or notch filter with the VCF1 & 2 (not the same). This explains how: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-4en6ioPAAGc.htmlsi=MU31kyW1yRB9hKBp&t=630

I can’t guess the accent. Brazilian??

Merci !

Just out of curiosity: Are you Mexican? Because your English is very good and very fluent, but I can spot a certain Spanish accent (I have a personal theory of hispanic motherlanguagers inverting Bs and Vs, to say the less). And the funny skull from "la dia de los muertos" is a typical Mexican tradition. I could be wrong, but... I think you're Mexican! At least, in origins. Maybe a second or third generation immigrant. And I have nothing against being what we are: Just citizens of the world. But I'm so curious by nature. And, since I claim to have a culture JUST ABOVE THE AVERAGE, it would be a gratification for me to have understood that. I'm also an immigrant. I'm half German, half Italian. I know, I know - don't blame ME. Both sides of a goddamn coin of hell. We're still friends, right?

Honestly, it would be great if you make the videos 2-3x shorter with less repetition. #2024

Thanks!