V12 Supercar Engine Swap into 5.0 Mustang...HOW?!

Подписаться 293 тыс.

Просмотров 513 тыс.

50% 1

What happens when you take a gigantic V12 from an Aston Martin and an 80's Foxbody Mustang, and cram them together? A TIGHT package! On this episode, Tony Angelo and the Stay Tuned crew attempts to swap a massive V12 and an American Powertrain T56 Magnum into a 1988 Foxbody Mustang, using nothin but a sawzall and a welder. Will it even come close to fitting? Are these guys insane? STAY TUNED to find out!
---------------------------------------------------------------
CHAPTERS:
0:00 - Intro
4:00 - Trial Fit 1
8:45 - QA1 K-Member Install/Engine Mounts
20:45 - American Powertrain T56 Magnum
27:56 - Trial Fit 2
30:43 - When In Doubt, Hammer It Out!
39:25 - Trial Fit 3
44:02 - Engine Mount Fab
46:26 - It's In!
----------------------------------------------------------------
GRAB THE NEW STAY TUNED SHIRTS AND GEAR: tangeloracing.myshopify.com/
BUY US A PIZZA HERE!: www.paypal.com/donate/?hosted...
WE APPRECIATE YA!
Send Me Stuff!! - PO Box 68, Spring City PA, 19475
Instagram: / tangelo96
----------------------------------------------------------------
STAY TUNED CREW:
Barb: / mbarbalinardo
Russo: / thakingofhearts
Zach: / therealslimzimmy
Mike Kunz: / mikeslim
Tunes by The Subtastics: subtastics.bandcamp.com/
----------------------------------------------------------------
MY PARTNERS:
Holley: holley.com/
American Powertrain: americanpowertrain.com/
QA1: www.qa1.net/
Summit Racing: www.summitracing.com/
Wirecare: www.wirecare.com/
Boxo: www.boxousa.com/
Miller Welders: Click the link to Grab Our Synchrowave 210! www.millerwelds.com/equipment...
FREE SHIPPING on all orders when code "staytunedta96" is used on either PypesExhaust.com
or ColdCaseRadiators.com!

Авто/Мото

Опубликовано:

9 май 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 2,3 тыс.

@One_Shot_Garage 2 месяца назад

This is going to be epic! This channel needs to get to 1,000,000 subs. One of the best car shows on youtube.

@HeadingEast33 2 месяца назад

Easily the best and most unique.

@diegop2311 2 месяца назад

Yup

@Underpantsniper 2 месяца назад

Agreed, we just need a few episodes with Lucky.

@ebbarc 2 месяца назад

This might just get it there. Cool build for sure

@bfgstcar00 2 месяца назад

You needed a name. Try this. Aston Farten'. Shitin' n gittin'!

@dalehall2993 2 месяца назад

Need a shirt that says "we're gonna need a bigger shop"..😂

@StayTunedTA 2 месяца назад

Man, we DO.

@merlinguitarworks9331 2 месяца назад

This needs all the upvotes

@mattgraham1983 2 месяца назад

😂yes definitely

@claysmell 2 месяца назад

with Chiefy and jaws on it

@ArchangelJuicy 2 месяца назад

@@StayTunedTA we need a shirt that says somthing about the pizza

@user-fk7ei9jj4o 2 месяца назад

Another shirt worthy quote, " they said we were idiots... They weren't wrong about that...". Love watching you guys push the bounds of lunacy.

@Jevans3141 2 месяца назад

You had me at "V12 in a Mustang".🍻

@AnonymousEliteZero 2 месяца назад

V12 noise out of a Foxbody is going to be absolutely Wild! and thanks to your engine donor and whoever developed that bellhousing

@CorePathway 2 месяца назад

Straight pipes or equal length headers?

@hksp 2 месяца назад

@@CorePathway thats brilliant exhaust , not some BS straight pipes

@kittybrowneye3163 2 месяца назад

When it runs putting anything English into anything means you're going to spend alot of time in the shop, good thing they have one

@trillrifaxegrindor4411 2 месяца назад

fox and martin.........sounds sick,and a funny throwback to the old days of hotrodding and drag racing

@StayTunedTA 2 месяца назад

is it sacrilege though? For a non-Mopar?

@ryanhollingsworth1148 2 месяца назад

They did race Fords also before mopar

@ryanhollingsworth1148 2 месяца назад

@@StayTunedTA they raced Fords before Mopar

@JT-un7dc 2 месяца назад

Name the car Saucy crumpet.

@aarongrattafiori617 2 месяца назад

@@StayTunedTAthe whole thing is kinda wacky. You could paint it even like one of the Sox and Martin cars.

@johnhickman106 2 месяца назад

Alright Tony, as a PA boy, with another PA boy over here in the UK, come on over to England and do an on-location video of “Stay Tuned.” Hell, I’ll even pay for your airfare. The English engine/Foxbody combination has me intrigued. That said, we are just a couple of Pennsylvania boys and a British mate, with Foxbody Mustangs doing the impossible over here; restoring, rebuilding and drag racing with the logistic pains of being overseas.

@trillrifaxegrindor4411 2 месяца назад

quote: Initially Martin and Sox were competitors, but Martin approached Sox to drive his car after concluding that he just couldn't beat him. Sox drove a 1963 Chevrolet and then a factory-sponsored A/FX Mercury Comet in 1964. In 1965, he drove an altered-Wheelbase Plymouth. so,fox and martin is safe as these 2 drove all the big three.good tribute

@nickleach7986 2 месяца назад

Tony, you definitely need to call it The ASstang!!!!

@Srone79 2 месяца назад

Absolutely I was thinking the same thing.

@OldGreyBeard57 2 месяца назад

Also thinking the same😂

@VernWatson-bd8yk 2 месяца назад

Me too!💯👍✌️

@jonthecomposer 2 месяца назад

I should have read your comment first. Well damn. lol

@DietTurbo 2 месяца назад

Astang Martin

@JasonFromCT 2 месяца назад

I can’t believe you crammed TWO Duratec V6’s under that hood!

@harveyezell7678 2 месяца назад

Cardboard Assisted Design is the only "CAD" most of us shadetree guys have access to. Great work gentlemen!

@lucasdamask 2 месяца назад

A tip for clearing tunnels and bashing sheet metal in, use a 4x4 as a chisel and hammer it on the surface, it will make a lot more room in a cleaner way, with almost no hammer marks. That thing is gonna be awesome.

@allareasindex7984 2 месяца назад

This is SO much better than yet another LS swap!

@MikeAnderson-uj3oo 2 месяца назад

I will agree 1000%. I am so sick of LS swaps. And right behind that is body swaps. Taking an old body and sticking it on a modern car. Whatever happened to guys building their own chassis ? I just don't see the enjoyment in that. Maybe because I have built a few complete cars myself. Small block Chevette, 4x4 Elcamino, Mid engine VW van, Rear engine Ford Courier pick up, These were all complete hand fabricated chassis. No sticking a body on top of something else.

@Bubbaxlt 2 месяца назад

Right? Don't get me wrong, I understand why people do LS swaps. Easy to find and easy to make power with but they're everywhere. That's why I'm wanting to go with a 8.1 swap in my obs Chevy. Not unheard of but still not an LS swap.

@gerbs304 2 месяца назад

YEAH!! WHAT HE SAID!!! EFF THE LS!!! 😆😂🤣

@button-puncher 2 месяца назад

That single tube in the motor mount, I'd add a second tube underneath. The single tube looks like it's almost horizontal. Not a good situation. Amazing that it fits, and they make a bell housing for it? Nuckin Futz. Great works guys. Can't wait to see the next episode.

@piuthemagicman 2 месяца назад

My exact thoughts about those motor mounts.

@Mike-Honcho- 2 месяца назад

That engine is based on the Ford 4.6, that’s why there’s a bellhousing for it.

@tscustomstation 2 месяца назад

@@Mike-Honcho-yep ford v12

@brandonknight7240 2 месяца назад

Yes that looks sketchy as hell

@TeensierPython 2 месяца назад

The T-56 was used in aston v12s from at least ‘99-‘06. Dodge, Cadillac, Chevy, Ford, Pontiac, and Holden have used this transmission from the factory in their cars. It’s an incredibly common transmission for “sporty” cars and trucks.

@marksmith1593 2 месяца назад

Please keep that chain hoist, my father was a expert old school machanic, i remembered his shop always had a chain hoist taking out engines ect, great memories i had listening to that sound , brought back huge memories as a kid watching him tear into cars , he had no fear to fix them . My father was awesome and i see that in you! Never change buddy ok!!@

@mobygodfrey4936 2 месяца назад

Cant wait to see Tony drift the wheels off this thing

@layzboy2545 2 месяца назад

The Name is Bondo, Jimmy Bondo. Best I could come up with🤣🤣🍺🍕

@StayTunedTA 2 месяца назад

HAHAH, I was jus doing that. Bond, Hydra Bond.

@layzboy2545 2 месяца назад

@@StayTunedTAHow I spent the first 15 of the video. 🤣🤣 Shoutout to ya, Barb, and Zimmie kid. It’s a great one so far🤘🤘

@frankrizzo5057 2 месяца назад

Built ford tough with Aston stuff

@button-puncher 2 месяца назад

@@StayTunedTA Double Oh NO

@JT-un7dc 2 месяца назад

@@StayTunedTAname the car Saucy crumpet.

@Pedroisanickname 2 месяца назад

Tony's bro his body language is like nope, this ain't going to work or fit. If I didn't see it with my own eyes I wouldn't have believed it. Crew stabbed that thing in like it was stock.😮

@AutoCrete 2 месяца назад

A line I used to use a lot is "I hate when people tell me something is impossible, especially while I'm doing it!" While crowded, that would still fit on a T-shirt.

@Slysdexia2 2 месяца назад

I really appreciate the lift safety callouts, not everyone thinks about that stuff.

@oscargamer3982 2 месяца назад

Dropping a V12 into anything makes it epic.

@ironmike742 2 месяца назад

Those mounts need gussets for strength. Great job Tony.

@flpanhead 2 месяца назад

Yes, please. At least one more brace. There's a lot of length and odd angles. I don't trust them.

@chadl.981 2 месяца назад

Agreed 100%

@woodzy575 2 месяца назад

Ya, needs a bigger baseplate to spread out the force and 2 more supports. maybe after the headers are figured out then rework the mounts. awesome build!!!

@jasonbirch1182 2 месяца назад

Yeah that base plate was a little scrawny looking. I'd put a thicker longer plate bolted where it currently is, with an extra part sticking forward. Triangular gusset under the arm to the plate hanging out over that space . Maybe some back support.

@ArchimedeanEye 2 месяца назад

Yeah, they look engineered to shear clean off or at least bend downward very soon

@josephcassano5394 2 месяца назад

Tony call it the ASTON-MUSTING DISVANTAGE!

@MaxJam684 2 месяца назад

This brings me back to wrenching on Fox bodies as a daily hobby! Having all the 5.0 mods, there’s no way we would have done this back in the 80’s/90’s. But with the “modern” engine swap options, this just makes crazy sense. (Emphasis on CRAZY) Fun to watch all your project videos!

@jgiz6419 2 месяца назад

you guys are great!! I have a tedious and frustrating job to do on my truck today and every time I need I break so I don't start throwing things, I come in and watch you guys grinding away on this project and it gets me motived to go back out to the garage and endure more punishment.

@mlivshiz 2 месяца назад

I work for Tremec. Never been prouder so see my company name. Can’t wait to see this thing rip.

@brandonblair6868 2 месяца назад

20:36 “I bet ya that doesn’t come off” This repeatedly makes me laugh

@billmohrsuperpool5364 2 месяца назад

These Aston V12’s are bullet proof. Have many clients with 100k miles on them. Only thing they are known for is going through plugs and coils. We’ve been using the Amazon coils successfully and they are 1/4 the price.

@DunksterP 2 месяца назад

Dude! Awesome project, love every bit of it. Been following since HRG, you rock and I love the raw youtube stuff!

@cudak888 2 месяца назад

I was one of the "it's never going to fit" crowd. I can't tell you how happy I am to be proven wrong - this is one of the best hot rodding projects you've ever done, Tony & crew! Unique always wins when everyone else is doing the same old, easy-peasy engine swaps and builds.

@MikeAnderson-uj3oo 2 месяца назад

I was right there with ya. I know how tight those engine bays are to begin with. They still have a lot of hurdles to jump. At least they have the main one cleared.

@cudak888 2 месяца назад

@@MikeAnderson-uj3oo Even though they have some massive issues to deal with, I'd say the remaining hurdles are next to nothing (though I would have tried a K-member that supports coilovers in order to hack out the shock towers for throttle body clearance). If there's a bellhousing, there will be a flywheel and clutch, and the remaining bits to make it workable are nothing in comparison to the job they just achieved. Plus, since they had to low-mount the rack, they should be able to avoid the bump steer issue by using the later spindles - relatively easy issues to overcome. The only thing I'm concerned about are engine mounts. I don't trust how far out they're cantilevered, or the thickness of the mounting plate. That's the only obvious point of failure that I'm seeing at the moment.

@earlbrown 2 месяца назад

I didn't see a whole lot of room for a radiator.

@cudak888 2 месяца назад

@@earlbrown They can hack the core support and install one slightly angled, C4 Vette style. They can go full Porsche and run a pair of radiators on either side of the fenders - and given Tony's experience with a 996s - including having PowerKraut on hand as a reference - doing that wouldn't be too difficult either. So many ways to make this happen. The intake is the only concern I still have. Does the "other" intake bolt up as the internet claims it will, will it drive the build cost way up, and will it provide the clearance necessary?

@MikeAnderson-uj3oo 2 месяца назад

I've owned several Ford era Jaguars. The biggest issue I encountered on almost every one was the wiring. Mechanically, they are built tough. And yes, I do know I'm talking about Jaguar. Like Jeremy Clarkson said once, an Aston is basically a Jaguar in a party frock. In the situation you guys are in, you will no doubt be using an aftermarket, stand alone, wire harness. So you will be able to eliminate all the issues they are notorious for. I will be honest, I really had doubts that you we're going to shoehorn that monstrosity in place. Good job boys. And Tony.

@zachdebuhr6347 2 месяца назад

Lol that's me right now I have a 197,000 mile jaguar XKR from 2002. The engine is incredibly solid but some wiring harnesses for the throttle body are corrupted so I have to replace them

@ifgezroxy 2 месяца назад

This project is so awesome. Finally something, that is 100% outside the box! Can't wait to see more episodes of this AsStang. 🤘

@RealKlausSchwab 2 месяца назад

Awesome build! Waiting tirelessly for the next episode.

@CobraCinci 2 месяца назад

Fun fact, the reason things seem to good to be true on availability for conversion parts is because the 6.0 v12 from Aston was a ford design utilizing the 3.0 duratec v6 block as starting point. They literally duplicated the casting end to end to make a v12

@xalty1200 2 месяца назад

no, the block is completely different in design with deep skirt and no girdle. it has its own bellhousing the reason it has a magnum upgrade bellhousing is because it came with a t56 from the factory.

@3xeplodng_3agle_studios 2 месяца назад

@@xalty1200you two are talking about two different engines. Technically. But you're both right... And wrong. . .

@KanjoNights 2 месяца назад

Fox & Martin is hands down the best name. Do it! You could do a shirt with a gentleman butler filling up the fox with a jerry can.

@davidthompson245 2 месяца назад

Good stuff!, keep em coming Tony. Your channel keeps getting better with every episode!.

@stokerdon1020 2 месяца назад

That is one nice, "Mostly Adequate" V12 install! I worked on Astons for a few years. I feel your pain. But you will LOVE the way it sounds when yer done!

@Edwardmodos 2 месяца назад

South Bend Clutch might be able to match up a clutch set, they told me they have a cross reference of what works with what and can provide a solution for whatever your trying to accomplish.

@TheBigJuicy 2 месяца назад

Thank y'all for a different swap into a fox. I'm super excited for this build and it already looks like a beast. Juice

@jonathanmanning6821 2 месяца назад

You guys are wild!! 😂 love all of the builds, can't wait to hear this one 😎

@marksmith1593 2 месяца назад

I have been watching u on HRG for a long time! Big fan ! I just found your stay tuned site and can't wait to see the v12 mustang final! Supper cool , and you seem like a cool dude , great dad too!! Keep it up tony!!!

@dannyloughman 2 месяца назад

-Martin Ford-sese -King Henry (Henry Ford) -The Dragoon (British Cavalry, also has “drag” in the name) -Fish n Rips -Winston

@TeamZipTie 2 месяца назад

Thank you again for playing Subtastics. We are headed to York, PA soon. Pizza is on us.

@Eagle3M 2 месяца назад

Simply Stunning! I absolutely love this build, Tony! I can’t say enough about it but I’ll try. This embodies the true spirit of hot rodding, just like the vets did on the dry lake beds after they returned home from WWII. Speaking of “dub’ya, dub’ya TWO,” as my beloved grandpa used to call it, I’m reminded another well known Mustang that benefited greatly from a British V-12 swap, the fighter aircraft that served as inspiration for Lee Iacocca’s original Ford Mustang: the P-51! Not sure if you realized it, Tony, but you just stumbled upon my dream custom build with significant historical heritage. I instantly envisioned a bright silver paint job with air brushed panels and rivets in a direct nod to the P-51D, with an old school olive drab interior with stacks of aviation gauges, levers, and canvas or leather bomber seats? My imagination is running wild with names like “LOW LEVEL ‘STANG” or, since it was the Rolls-Royce designed engine that completely transformed the Mustang into a real world beater, just straight up call it “MERLIN!” One last thought- if you route the exhaust out the front fenders to resemble the aircraft, paint some nose art of a dark haired, bosomy pinup girl in knee-high socks and not much else, name her “SIMPLY STUNNING” as she is on my tattoo and you can consider me at the top perspective buyers. Please! My wife may divorce me but I’d go into debt for the opportunity to own this direct link to aviation and automotive history. Don’t call me crazy, just crazy enthusiastic.😂

@procharged6854 2 месяца назад

I dont know if Ive seen a better looking swap in a foxbody, those intake runners and the way it sits down in there looks amazing! I also like the history between the two companies which has even carried on to newer care like the front grille of a ford fusion looking like an Aston, etc. it all makes perfect sense to do this swap, while also making none at all, thats what rodding is about. I cant wait to hear this thing roar and see how you tackle to tuning, electrical.

@Levibetz 2 месяца назад

22:40 OH SHIT! He's got the table with the new parts on it. Power block vibes lol

@StayTunedTA 2 месяца назад

Hahaha, it always scream Fast and Furious to me!

@Levibetz 2 месяца назад

@@StayTunedTA I grew up watching Powerblock TV and Stacey David would always have like a cart with all the new parts they were putting on the project that was totally product placement. Throwing the old parts off the bench is the final Powerblock TV touch

@MikeAnderson-uj3oo 2 месяца назад

You gotta love the old Power Block days. It was like a two hour long commercial for new parts.

@layzboy2545 2 месяца назад

HellYeah Tony! Let’s see what the Aston Mustang can do. Fun projects like this keep me coming back. Gotta think of a clever James Bond name for it. Beer and a Slice Time! Ready to Stay Tuned🤘🤘🔥🔥🔥

@StayTunedTA 2 месяца назад

Thanks bud! Kick your feet up and crack that brew! Fox and Martin? Aston Powers?

@layzboy2545 2 месяца назад

⁠@@StayTunedTAAston Powers got me. Ha ha ha.

@danielschreier6700 2 месяца назад

Tony you nailed it with Aston Powers!

@michaels.ramsey7803 2 месяца назад

@@StayTunedTA Martin Ford?

@boydedmonds6709 2 месяца назад

Double O Uh Oh I love the build! It's like some of the combinations I've dreamed up over the years. Can't wait to hear it run.

@everwrathfan666 2 месяца назад

The hole saw on the Bridgeport ... priceless 😂

@38johne 2 месяца назад

Great job.Amazing build 🔥.Can’t wait to see it run

@georgesipple1356 2 месяца назад

Next one? Allison aircraft engine in a Mini Coop? This is great fun Tony. Thanks!

@richgwozdz8580 2 месяца назад

I’d pay to see someone slap a twin turbo viper motor into a old school mini cooper or fiat 500 and attempt to do a race week event with it

@danielweinbaum 2 месяца назад

Thank God you've chosen a manual transmission ! EVERY CHANNEL GOES WITH THE AUTO TRANS ! In a few short years the stick will disappear into the night...thank you for putting up a fight ! WHY NOT THE "TKX?'

@theobolmer2056 2 месяца назад

more gears more better

@wrongwayroger2519 2 месяца назад

Manuel harder to steal !!! LOL😅Hot Rods should have manuel and grocery getters need auto !!!JMHO !!

@Drmcclung 2 месяца назад

You mean hotrods with manuals and grocery getters named Manuel?

@jasonbirch1182 2 месяца назад

😂@@Drmcclung

@Drmcclung 2 месяца назад

@@jasonbirch1182 If you like stick, get a Manuel?

@nickaugust1661 2 месяца назад

have only just tuned in and subscribed. Absolutely awesome build!!!!

@robertjohnson4784 2 месяца назад

You got to love Tony always doing the hard ones love you guys the whole crew you guys are awesome always doing impossible and making it look easy

@davedube7309 2 месяца назад

Love this build boys!!! Pro tip: air hammer makes the tunnel widening job A LOT easier!!! Had to do that when I put a 350/350 in a 83 S10.

@richgwozdz8580 2 месяца назад

You shouldn’t have had too widen the trans tunnel on your 83 s10 to do the 350/350swap cause I didn’t have to when I did mine back in 2012 the only thing I had to do was notch the floor because I decided to slap a hurst ratchet shifter in it since I had line lock and a trans brake

@djk91lx28 2 месяца назад

Y’all are truly living out your dreams. Wild car builds. Pizza and cold snacks with friends. Then making money from it is the cherry on top 🍻🍻 Gents

@andydupont4786 2 месяца назад

I love this project. That engine is going to sound crazy coming out of the old foxbody. It will definitely be unique 👌

@roadhammer2380 2 месяца назад

I've been waiting to see this epic build 🙌

@StayTunedTA 2 месяца назад

HA, same, we waited on drivetrain parts for awhile.

@RearEngineShop 2 месяца назад

That engine is the size of the car! It’s going to be so cool. 👍 You will have to remove the 5.0 badges and get some V12 badges to take their place.

@shaneh56 2 месяца назад

Love this project!! Can't wait to see the next episode guys!! This car us going to be epic!

@toddgeeslin2190 2 месяца назад

I love when you put non-traditional motors in caes. This car is going to turn some heads with the sound. Keep up the great work!!!!

@HeartLessGem_ 2 месяца назад

Considering how "crammed" the v12 was going to look in the foxbody, it fits perfect! Heaps of room for headers too, QA1 makes things easier thats forsure, definitely keen to see this build take off like the awd s10 👌🏾

@vrm86gt 2 месяца назад

Tony, Fox & Martin is it! This is one of your coolest builds!

@nicklalonde2857 2 месяца назад

Love it what do you think of Austang murtin !!

@justinwise6950 2 месяца назад

You are a mad lad and I love this project! I am so glad it fits.

@Texasknowhow 2 месяца назад

We used to eat cake like that all the time... awesome good. Loving the swap guys, keep up the good work and details!

@stephencurry8552 2 месяца назад

I went the opposite way years ago. Long before anyone was doing engine swaps. I put a Chrysler engine - transmission and rear-end into a British sports car. Four wheel disc brakes. Six Konis. All braided lines. One reason I can appreciate your work. Great episode. My new favorite thing to look forward to on a Friday. Worked on my BMW, came in and watched this.

@3xeplodng_3agle_studios 2 месяца назад

🤔 was it an XJS?

@stephencurry8552 2 месяца назад

@@3xeplodng_3agle_studios No, it is a 1965 TR-4

@3xeplodng_3agle_studios 2 месяца назад

@@stephencurry8552 oooh. I really didn't expect that. Wasn't expecting it to be an XJS either. Honestly, glad I asked. That's awsome. 😎 Any chance you've any footage of it?

@stephencurry8552 2 месяца назад

@@3xeplodng_3agle_studios No, just photos. I have had no need to video anything.

@mikepoint4717 2 месяца назад

Tony and his guys are BADASS , V8 Porsche , Sike clone p/u , 55 Chevy , drift car , sleeper Lincoln and now a killer Mustang !!! . I think BANGERS & SMASH would be a great name lol . Cheers 🇨🇦

@djk91lx28 2 месяца назад

Also a great name. Good idea 🍻

@mikepoint4717 2 месяца назад

@@djk91lx28 hahaha thanks , I also thought maybe Toad on the Road lol 😆. Cheers 🇨🇦

@djk91lx28 2 месяца назад

@@mikepoint4717 you sir are far more creative than I. Awesome names.

@grantbuxton2108 2 месяца назад

My favorite build right now! Awesome ideas guys I love your way!

@glenholmgren1218 2 месяца назад

Very Interesting UNIQUE project! Keep it coming, boys

@Mongos_Garage 2 месяца назад

Yes sir cram that motor in there!

@MK2Scirocco 2 месяца назад

Love it!!! Can't wait to hear it rev out... Definitely needs X-pipe no muffler 🤪

@scottallpress3818 2 месяца назад

Damn right , x pipe , and maybe some black widows

@wrongwayroger2519 2 месяца назад

Mufflers and electric exhaust cutouts Sleeper style !!!

@hksp 2 месяца назад

delusional, it needs brilliant exhaust they developed the system many many years ago. or the brazillian secret weapon exhaust that successful on doing that recently

@ronbryant9934 Месяц назад

I've been following you for a long time I love your work this mustang going to be f****** awesome

@nissanv6TT 2 месяца назад

You and Lucky built a twin engine Impala. Of all the crazy projects on youtube, this is one I KNOW is gonna run and be awesome!

@theheadone 2 месяца назад

Thank you for preaching a bit of safety Tony

@justtinkering6054 2 месяца назад

2:02 One of the best "dad" jokes I've heard in a while!

@TimOnTwo 2 месяца назад

AUSTANG! I love the work ya'll do!

@messidub3428 2 месяца назад

Love the Tavarish clip, where yet again Tony drives MUCH faster than his passengers are comfortable with.

@RightFootTherapy 2 месяца назад

That’s a FoxTon of motor in there . “full of pizza and full of hope” is my motto in the garage as well lol should definitely be a shirt with like the new hope Star Wars font and count me in for one lol .

@kennethgamble5498 2 месяца назад

I support this tshirt idea

@Kstang09 2 месяца назад

Ooooh man, this is gonna be sweet. Cue the pizza!

@StayTunedTA 2 месяца назад

Thanks! Appreciate it!

@MikeAnderson-uj3oo 2 месяца назад

They need to keep track of how many pizzas it takes to finish each car. Obviously the more pizza, the more difficult it was.

@Carcrafter7165 2 месяца назад

This is what engine swaps were back in the day to see what crazy combinations they came up with. Hot Rodding the old school way love this. Shove the biggest engine into the smallest car 🚗

@davidwhitt507 2 месяца назад

Aye man I love the show Tony this is my favorite version of a show you’ve done with this show

@Rebar77_real 2 месяца назад

DB5.0 Going to be nuts!!

@NeverLetOff 2 месяца назад

YES! V12 POWAH!!!

@StayTunedTA 2 месяца назад

Let's go!

@LeesGarage 2 месяца назад

This project is awesome. Keep crushing it guys.

@bcole505 2 месяца назад

I didn't how you were going to get it to fit, but after the Twin-Pala on HRG I knew you'd make it work!

@williambehles7704 2 месяца назад

I've a suggestion for naming this project. The Aston Hammerstang. I had a good chuckle when Tony was wailing on the trans tunnel and spitting rust snow. We've all been there! This thing is going to be Flippin Cool, and that is a FACT!

@StayTunedTA 2 месяца назад

Right on, thanks for watching!

@DM0407 2 месяца назад

Asstang

@danwilliams6776 2 месяца назад

This has strong potential to be my favourite youtube build of all time. Such killer content 👌👌

@oler777 2 месяца назад

Oh boy, I love watching work

@forrealb5000 2 месяца назад

My favorite RU-vid build to date. Can’t wait to see it all come together!

@crazymasina8524 11 дней назад

guess I started watching this before and am now coming back to you guys where you're doing the trans tunnel massaging...I'm hooked now, lol

@jadendufrain6632 2 месяца назад

Fastin’ Musty Gunna be a killer mind trip to hear that v12 coming out of that foxbody

@snarlyvegaslots 2 месяца назад

Hey Tony and crew. Watching from my Las Vegas home. I suggest the name Foxy Martin. Being 57 years young a lot ...A lot of my friends had fox body Stangs and fixed them up and they won most races against most Chevy and Pontiacs with ease. Have a great weekend, we all enjoy your content and conversation!

@joshbrekke6374 2 месяца назад

Right on QA1 Tubular SubFrame!! This one is gonna be Rad! Fun!! I agree with Fox & Martin. Also with a revisit in about 4 months to a year with hop upgrades. Sweet Bridgeport, we use those at QA1.

@FujitheChef 2 месяца назад

Yo I came and subscribed to this channel because of this video. Please make this a series. I can’t wait to see what you turn this into and I hope sponsors get involved. This thing would be an amazing sema car

@cramiro71 2 месяца назад

Crazy project! Lovely

@Otto-AutoPilot 2 месяца назад

Love it, well done guys!

@gregm1457 2 месяца назад

New favorite channel, always an Angelo fan 👍

@SeanMeldrum 2 месяца назад

As tight as it is for headers you guys should look up swapping out that rag joint for a borgeson u-joint. Was into Fox Mustangs back in the late 90's/early 2k's. Even wrote tech articles for a local Mustang website. LOVE what you guys are doin'!

@frankno2plus1 2 месяца назад

A friend of mine just finished rebuilding one of those motors, inside they're just 2 V6 Mondeo motors... But they do go well and they do sound awesome...

@Wonderboy205 Месяц назад

I had the same color, same year fox, had some “mechanic” fix the struts as I didn’t have welding experience (it came out about as bad as yours), I had to sell it after putting a ton of work into it because I had move out of my apartment after getting dumped. For a split second I thought this was my fox that yall ended up with when I saw those strut towers haha. I will own one of these again, sick video !