do you still remember what feeler gauge you used? exhaust valve clearance in the manual is 0.275-0.325mm but I'm pretty sure there are no 0.005mm feeler gauges?
666Eddie123321 You're right, there's no .005 gauge. I adjusted the exhaust valves to 0.31mm, which in my experience is a good solution. In this case I had to adjust 9 out of 12 valves (clearance below minimum) but unfortunately the battery of the cam died shortly before I removed the cams.
Sorry for the very late reply, but it didn't get any notification. If I remember correctly the cam sprockets on this engine aren't adjustable, at least the stock ones. But I didn't have any issues with the timing it wasn't off.
i just pulled it out without removing the bolts and the little brackets for the plastic, just loosened the 2 screws on right and slightly bent the bracket :)