Тёмный

Vinyl Wrap A Front Bumper With Inlays | Subaru STI 

CK Wraps
Подписаться 397 тыс.
Просмотров 108 тыс.
50% 1

Check out the products here on Amazon:
bit.ly/VViViDGlossNardoGrey
bit.ly/VViViDTechArtBlackCarbon
bit.ly/VViViDLightSmokeTint
A lot of work went into wrapping this front bumoer, and this Subaru STI front bumper isn't even the hard one to wrap.
www.ckwraps.com/
Get Certified Visit www.vvividhq.com/get-certified
Instagram @ckwraps @newconceptautosalon

Авто/Мото

Опубликовано:

 

12 май 2018

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 62   
@cRashtEstDumy8
@cRashtEstDumy8 6 лет назад
Amazing job CK! Not going to judge you on being tired and it just shows that you are human, working hard, yet still getting the job done! Thanks for the great videos and being there to show us how it's done. Not a lot of wrappers talk through it the way you do, its things like that where I feel like I'm actually learning something.
@neonnerd1364
@neonnerd1364 2 года назад
Your videos are a godsend. I recently decided to try my hand at wrapping and I've been using your videos to learn and they've helped tremendously.
@JohnSmith-hw6xc
@JohnSmith-hw6xc 4 года назад
Amazing job ck I'm wrapping my legacy and you make it look easier then it is. Thanks for the time to show us.
@BaileeGermanotta
@BaileeGermanotta 5 лет назад
“As you get close to the end I recommend doing what I just did there” *no explanation* LOL I’m sorry you’re so tired, you did excellent work on the subie and I’m loving going through these videos. Keep them coming!
@badmrfrosty1356
@badmrfrosty1356 6 лет назад
Very nice job dude. Attention to detail the entire time.
@OneEyedWilly5150
@OneEyedWilly5150 5 лет назад
Bad MrFrosty that’s the kind of work actually expected anytime but for sure not for a cheap wrap ahHahaha, great damn job man, teach me ! Haha in the IE: where ya at ?
@alexandermilosevic_
@alexandermilosevic_ 6 лет назад
You're a sorcerer with this stuff, nice work!
@felixlugo9109
@felixlugo9109 6 лет назад
Great job as always
@ARomanRacing
@ARomanRacing 5 лет назад
you definitely sound burnt! thanks for this. I am planning of wrapping my STI bumper and was not sure where I should do inlays. Thanks again buddy.
@neepathius7
@neepathius7 8 месяцев назад
thx for taking the time to teach us this man 🤝
@Roadsurfer2k11
@Roadsurfer2k11 3 года назад
You know when CK is exhausted when he doesn't fold the vinyl backing 😁
@karlpoglitsch1087
@karlpoglitsch1087 6 лет назад
Thank you for these! Much appreciated...
@1389Mxer
@1389Mxer 6 лет назад
Would you make a video showing how you layout a directional wrap on a car, that's something I haven't seen before on RU-vid. Doing a great job even with being tired.
@lummy321
@lummy321 5 лет назад
Pheonominal work Christian ... Lord bless you brother ... Peace
@rodneymartin9802
@rodneymartin9802 2 месяца назад
He’s a professional. Great job
@ronjlwhite8058
@ronjlwhite8058 6 лет назад
Lookin sweet AF!!!
@nadimadatia
@nadimadatia 6 лет назад
Watching you do this front bumper helped me appreciate why I will pay someone to do this job for me! Vinyl Artist.
@Reveqable
@Reveqable 6 лет назад
amazing work :o
@jonasgrumby1093
@jonasgrumby1093 6 лет назад
Nice job
@chrish4640
@chrish4640 Год назад
Nardo grey by vivid is super hard compared to other wraps good job bro super frustrating but your a champ
@josecolumna8575
@josecolumna8575 3 года назад
Fantastic artist you are great 👍
@Morgatron_
@Morgatron_ Год назад
You created so much more work with that first step of taking the backing off and stretching it the way you did. You don’t need to heat for the first step if you lay it from the center, out. But heating first to then stretch to glass over, stretch’s it too much. You can cold lay it first and THEN heat to glass it out. Way less material stretching.
@confessionsofthedoodle
@confessionsofthedoodle 6 лет назад
damn looks nice!
@StardustAutomotive
@StardustAutomotive 6 дней назад
I love how this guy sounds like Tom Brady.
@TheMikeboyz
@TheMikeboyz 4 года назад
Nice job. I'm wrapping a nissan Juke front and rear bumper. What's your advice for wrapping circle head lights?
@sonhuynh8222
@sonhuynh8222 2 года назад
Looks great ! Just curious…. Sometimes bumper removal is preferred or preference ? Ur thoughts ?
@forg0tin397
@forg0tin397 3 года назад
Would it have been easier to remove the tow hook wrap the bumper then install the tow hook?
@torellecarter1001
@torellecarter1001 4 месяца назад
curious how you would do this same job now, i feel like this is a lot of heat and stretching compared to what you do now. would you still come at this bumper the same way?
@thuggwafflezz9721
@thuggwafflezz9721 4 года назад
What does adding the inlay do?
@ParkerCockbourne7
@ParkerCockbourne7 3 месяца назад
WOW THANKS
@derickponce-sanchez772
@derickponce-sanchez772 6 лет назад
Are you running on fumes because there is more time consuming work than expected? I have been doing LED installs for friends and trying to keep good quality just takes way longer than the time and money I quote them.
@sesshoumarunagyur
@sesshoumarunagyur 3 года назад
it is not could be easier to remove the whole grill out of the way? I would like try to wrapping my subaru too that's why I am asking! bw your videos helping me a lot to understand to working with the vinyl! thank you!
@consumerthis3169
@consumerthis3169 3 года назад
Man I can’t stop looking at that tow hook hole, driving me crazy
@xanthony1919x
@xanthony1919x 4 года назад
CK do you think I would need to do the same inlays on a 13 civic si next to the headlights?
@Ethan-fr4jy
@Ethan-fr4jy 2 года назад
how do you stretch so much without stretch marks
@dannykim1462
@dannykim1462 Год назад
Where can I get this wrap/color
@davidwright4363
@davidwright4363 5 лет назад
Hey CK you have been inspiring me to give this a go on my 2009 WRX. How do I work how much vinyl I need to order for the whole car?
@sn0w55
@sn0w55 4 года назад
David Wright Length of car x3, add an extra 5-15’ for bumpers, and round up to closest film size!
@FlashTheEagle
@FlashTheEagle 6 лет назад
at what point is it considered overstretching? in this, the spoiler and the boot/trunk video you seem to stretch the film quite a bit.
@Ac19885
@Ac19885 Год назад
Hey, Bro! Can you tell me about the inlines, i have problems with the edge. I'm always short, and i see the car color. i think I'm cutting too much or the inlines are not long enough on the interior side. please let me know. Peace out!
@tomaz2312
@tomaz2312 3 года назад
Question. I want to wrap my sti. I have scratches dents and chips. I will get it paint corrected but the paint wont be perfect. Will the wrap look like shit because of rock chips and a few other imperfections?
@nuraleef410
@nuraleef410 6 лет назад
hahahahaa. i definitely understand the feeling. all the hardest and best part to wrap. then theres the JD part.
@emory7467
@emory7467 6 лет назад
do you ever use 2 layers on front bumpers or hoods to help mask rock chips? ive done a few in vvivid matte and it seems to chip easilly and they stick out like a sore thumb.
@dennisracer6441
@dennisracer6441 3 года назад
You are cool man
@artjomsacharow4188
@artjomsacharow4188 6 лет назад
Why not take that worst ringtone in the world to the camera if it's going out of charge 😉😂😂 but again, it's a wonderful job you did. 👍👍👍👍👍 Can't even wait for the delivery of my "Avery Dennison Satin Urban Jungle" to start wrapping my own car 😋😋😂😂
@consumerthis3169
@consumerthis3169 3 года назад
Subaru , take notes, this is the shit we want
@hankgs
@hankgs 6 лет назад
Looks great! Just wondering why you wouldn't pop off the front grille ...?
@CKWraps
@CKWraps 6 лет назад
I did but put it back on after the carbon fiber was done. No need to have it out after that
@EPIKjdm
@EPIKjdm 4 года назад
i need a shot LOLLLLLL someone bring me one. fuck i died LOLLL
@brianmogle1121
@brianmogle1121 2 года назад
Why did you choose to NOT remove the bumper cover and wrap around the edges where it meets the fender?
@GOLD_FEVER
@GOLD_FEVER Год назад
have you tried wrapping a piece that is not attached to the car? it's HARD to wrap without having something holding the piece back while you pull on it... It is very awkward having to put on the film and then when you pull on it it just moves towards you. THat is why he leaves it on the car so that he can actually put it on... However he DID remove the lights and other pieces that go in the bumper to get better coverage.
@brianmogle1121
@brianmogle1121 Год назад
@@GOLD_FEVER Yes, I have, a lot. That's why you loosen the bolts and hardware that connects it to the car. You then wrap as normal, then remove it and wrap around the edges! Not hard.
@souissinourdine7743
@souissinourdine7743 2 года назад
😍😍♥️♥️
@thefishingreel1449
@thefishingreel1449 4 года назад
Really excellent but that compressor noise in the background has to go. Good job.
@cassiejvance7496
@cassiejvance7496 5 лет назад
Still on catch up with your videos. Great wrap again, but how glad are you that those annoying idiots in the back ground are gone. 💯💯💯
@W333dm4n
@W333dm4n 3 года назад
10 dislikes are from wraptors
@brianboylan9932
@brianboylan9932 5 лет назад
Who the heck “unlikes” a video like this..? Lol haters
@candicebeebe6688
@candicebeebe6688 6 лет назад
Tell the owner you guys need some racks.
@williampietraszewski4140
@williampietraszewski4140 6 лет назад
Always interesting to see how stress effects ppl. You're attitude is night and day difference compared to most of your other videos. Just seeing how much more little things frustrate you, like a wrinkle, or even your "annoying ring tone". Prob wasnt best time to record a video. Was much less enjoyable to watch seeing how bothered you were by everything. Hope things smooth out for you either way. Solid work
@BaileeGermanotta
@BaileeGermanotta 5 лет назад
Noooo cut out in the worst eyelid part to do 😭
@RecordRockerSolo
@RecordRockerSolo Год назад
The guy in back ground talks to much tell him to get to work.
@TheNadot
@TheNadot 2 года назад
Not good work. Must be two for doing that 😂
Далее
Я нашел кто меня пранкует!
00:51
НЕ ДЕЛАЙТЕ УКЛАДКИ В САЛОНАХ
00:43
Vinyl Wrap A Front Fender With A Clean Tuck
18:20
Просмотров 47 тыс.
How to Vinyl Wrap a Hood | VViViD Vinyl | @CKWraps
12:02
Vinyl Wrap A Rear Bumper On A Subaru STI
57:04
Просмотров 45 тыс.
First Time Vinyl Wrapping my Civic PINK !!
29:01
Просмотров 563 тыс.
I wrapped my own car | Subaru wrx sti
17:09
Просмотров 7 тыс.
How-to make the perfect seam with vinyl.
5:34
Просмотров 89 тыс.
Странный Ситроен Кларксона
0:56
😱 Велосипед-лимузин?!
0:20
Просмотров 459 тыс.